Woo! Almost done with my 1st precision rifle!

DamnDave

Sergeant
Full Member
Minuteman
Dec 7, 2009
240
6
California
Just finished putting everything together last night with the help of some friends. My experience is limited to tactical style rifles, but wanted to get into precision shooting.

I have some FGMM 168gr, what kind of groups do you predict this rifle is capable of?

Also any pointers will help thanks.

Parts used:

Remington 700 SPS Varmint 308
Bell and Carlson A2 Stock
Timney Trigger
EGW 20MOA Base
TPS Rings
Leupold VXIII 3.5-10X40mm (Vortex Viper PST 4-16x50mm FFP on the way!)

4884869748_4fe7beccaa_b.jpg
 
Re: Woo! Almost done with my 1st precision rifle!

With remington its a crap shoot they guarantee 1moa but with that stock and match grade ammo it could shoot .5 moa of course that's providing you do your part
 
Re: Woo! Almost done with my 1st precision rifle!

I suggest you skim bed the stock. My B&C tac medallist sits slightly cock-eyed (barrel rub), so I sent it to get skim bedded, and hopefully it will shoot much better when i get it back
 
Re: Woo! Almost done with my 1st precision rifle!

<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: AlliedArmory</div><div class="ubbcode-body">...I have some FGMM 168gr, what kind of groups do you predict this rifle is capable of?...</div></div>

I have one in an AICS with a Jewell HVR, same base, Seekins rings, Nightforce NXS 8-32x56...

I'm getting sub .5 MOA groups pretty consistently with a best of .35 on two occasions (all 5 shot groups).

Best groups were with:
43gr RE-15
BR-2
175gr SMK
COAL: 2.80
Ogive 3.233

Today I shot a .37 MOA group with everything above, except using 45gr Varget instead of RE-15.