Warhorse Saracen barricade bag, hardly used. $95 **SOLD**

Second ever bedding job on a kelbly action. When I pressed the action into the marine Tex a little bit oozed up around the bolt release. I have good release agent in there, but I’m trying to decide if I should try and wipe it out before it dries or if that will just just push it further in and cause problems. I haven’t touched it or moved it yet. Thoughts?

I only post on one public forum ( here ) and one private forum. The best private forum by far is allthebilge.com .

Nothing illegal but anything else. Probably some softies here that wouldn't make it past week one but check it out . Right wing, God loving, gun toting people that separate the bullshit from the facts of life.

As the title states, I am looking for a stripped M24 receiver, receiver & bolt, etc. please do not message me if you don’t have feedback, scammers will be reported.

Fantastic read and hits the nail on the head….


This is why the MSM is dead. Because the brains have moved to alternate sources. And what is left are Pravda-spewing woke idiots, trained by a previous generation of Pravda-types… that they job is to alter the minds of the American Reader and support a liberal, socialist, communist, Maoist agenda to bring the nation don the shining path of world socialism.

Pinkerton is always in point and here he nails it!!!

Sirhr

Crye Precision boonie hat, size 7.5 $30 **SOLD**

These have been used a good bit, been to some matches like Mammoth and show some wear/scratches. They function perfectly fine.

You can click the link below to see a ton of photos, including a few I took through them on Friday ranging different distances.

The harness and wind meter were never used.

This model has Applied Ballistics built in.

Login to view embedded media
$1,100 shipped. sold pending funds

Selling my 7 SAUM barreled action.
- Defiance Classic LONG ACTION
- Proof Research 18” carbon wrapped barrel
- SRS TI Pro 3 port self timing brake
Chambered by Denny Powell in NM. Action, barrel, and brake are all cerakoted in Sniper Gray. I’ve shot about 320 rounds through it. This is great for an ultralight rifle build.
$1,600 shipped to your FFL.

For sale is a new in box pure precision skltn action in right hand. Comes with top rail rail mounting pins and screws and trigger pins.
No trades. PayPal or Zelle only.
$950 tyd

Given the same weight bullet, is there an advantage to a 6mm CM with a light bullet vs a 22 CM? Looking at load data there seems to be a couple hundred fps difference, with the 6mm CM being faster.

Seekins SP10 6.5 CM with 22in barrel in battle worn fde. Has never been fire or even loaded. Comes with the factory magazine still in the wrapper. Absolutely love this thing but unfortunately need to liquidate.

Located in Central FL
Price 2500.00

I have an excellent condition MPA Matrix pro for sale. It is short action 700 clone, ambi cut in Tungsten. It has the vertical 2 and 3 grips and all the different thumb shelves as well as the NV bridge. It also has the full gray ops internal and external weight kit. Chassis doesn't show all the weights. Also has the matrix bag/mag stop.

Asking $1450 for everything to your door.

HELLS ANGELS ON WHEELS (1967)

Starring: Jack Nicholson, Adam Roarke, Sabrina Scharf, and Sonny Barger.

Login to view embedded media

In a dusty and rugged part of San Francisco, the hard rock, brawlers, and hippies capital of the 1960s, 'Poet' was a restless young man working a dead end job at a gas station. Already a seasoned street fighter, his temper was short, made even more volatile by crusty scalawags who kept testing him. Every interaction could end up with him dealing out an asswhooping and Poet knew that his time at this job would be short. One day, a band of Hells Angels riders stopped by the gas station. For Poet, nothing was more alluring than being a member of one of the largest and most notorious outlaw motorcycle clubs in the country, and he made up his mind as he took in the acrid fumes and the growling thunder of Harleys idling around him. One thing led to another and Poet was invited to become a hangaround of the club, and then a patch-rocking prospect. However, as Poet's rough and tumble nature carried him up through the ranks of the club, he learned that with every step in that organization came with hard prices to pay, far harder than a metal chain enclosed haymaker connecting with a skull in the most brutal alley fight...

Playing the President of the Hells Angels MC in this movie is none other than Sonny Barger himself, who in 1967 was the chapter president of the Oakland, California HAMC charter.

So I had my rifle zero'ed just fine recently, but had to send my action back for some looking over for an issue I had. But now I got the rifle back assembeled the way it was prior and went to zero again this morning and it was hitting .2 mils too high. So when I went to adjust down, I couldn't. I know I have the zero stop in play, but when I wanted to adjust the clutch, it wouldn't go anymore negative. No way to get that turret down .2 mils to get my perfect zero. There's gotta be something I'm missing here! Sat there for 2 hours trying to figure this out. Can anyone shed some light on this? Thanks!!!

Raising funds for an ATX before next season. Shipping does not include Insurance. If you want Insurance I can quote it to your zip. PP F&F or USPS money order.

NIB Bog Deathgrip tripod. Aluminum legs. Green. $235 shipped. $200 ftf in Missouri.

Sordin Supreme Pro-x ear pro. Gel cups. Two small scuffs right next to each other. Cosmetic. $180 shipped.

Trigger Tech Special 2 stage flat shoe. NIB. $215. SOLD

Axis Q6155E ptz. Will include a POE injector for it. Laser focus assist. 30x optical zoom. She fucks. $320.

Axis Q6155E ptz painted to match brick. Same, will include a POE injector for it. Should clean up with some acetone. Rattle can paint. Missing lables but scout's honor it's a Q6155E. $300.

Axis A8105E doorbell. poe required. If you have cat5/6 to your door you can swap it for a rj45 connection to power it. Picture is missing the other rubber gromet. I have spares ill include. $200.

Also have a Axis A8207ve MK II. Currently in use to flex on the neighbors with their bitch ass ring door bells. Entirely over kill but I stumbled into it and couldn't pass it up. Name it, it has it for access control. About three months old. $850.

Will post pictures in a little while, site says pictures are too big.

Ugly reloading Derraco precision primer seater. As new $155 shipped

Pp FF/Venmo

A couple of buddies and I are thinking about trying out a few nrl hunter matches this year and weighing options on caliber. The easy button looks to be 24-26” 6.5 creed, which is what I’m leaning towards, but open to other suggestions. Also I am thinking of being in open heavy but not opposed to open light division if I could get there. Couldn’t really find a thread on it so wondering if we could start one where people post their caliber, bullet, velocity, rifle build, barrel material, length, overall weight, scope, etc? I apologize if this has been started but could only find bits and pieces around.

For me it was the actual fun in shooting without all the noise but then the competetiveness creeped in. Now I seem to enjoy the art of what makes a rimfire accurate and repeatable. My saturdays are normally spent doing honeydues and or shooting but here lately I find comfort and peace in sneaking down to the shop and making someones dream come true. Happy rainy Saturday my friends(my comfort room)

Selling my K&M Arbor Press. Used but still works great.
$130 shipped

Selling my tripod setup. Leofoto SA-324CL tripod with the Really Right Stuff Anvil 30 head.
$680 shipped

I've got 406. 3 times fired 6.5 Creedmoor Lapua brass srp all the same lot #. It has been annealed every time after firing all shot in a match chamber asking $300 obo shipped. accept PayPal F&F

USMC MK12 Mod 1


$6k

Original high caliber sales built upper. C stamp keyhole reciever, Colt bcg, PRI gasbuster CH, Douglas barrel, ops long collar, brake, surplus 22h non lever stop rings, issued Marine Core leupold TS30A2 scope, KAC 99167 marked rail not the newer 21318 marked commercial rail, kac big knob rear flip sight, kac flip front, kac nsn marked bipod mount, Harris SBRM bipod and podlock,

Lower is H&R M16A1, Geissele SSAE trigger, surplus A1 stock, ergo grip,

Deployment case is issued mk12 case, mk12 foam, OG Otis cleaning kit, Mk12 bore guide, Dewey Cleaning rod, 3 20rd mags, USMC gunbook, mil dot master book, mk12 mod 1 OP Manual. Original Eagle industries TAS sling. Suppressor not included

PayPal, Venmo, certified check

Hello,
on my brass preparing process I use the Redding dry Lube for lubing the neck and Redding Imperial Wax.

I Lube the body of the case with Imperial Wax and the fingers and dip the neck on the dry lube then resize.

After that, I clean the exerior of the case with isopropil alcool.

I not use the same product/method for the interior of the neck.
Some time I use a brush, but I think that some residue of dry lube remain.

Have some advantage on seating with lube residue?

Making some advantage on consistency?

Thanks

You tell me the pros and cons. Want to build .300WSM
Some influencers would be cost and weight
I have a 6.5 PRC built on a TL3.

Test fit at home, otherwise new. It has extra color which isn't an option anymore. Placed a piece of neoprene foam on the cheek riser and put it in the safe. All the stock specs are in the last picture and weighs 37.8 oz. It's about a 10 month wait to get one. $1100 shipped **SOLD**