Got a rare-ish KMW Sentinel stock in carbon fiber. Inlet for short action with IMB block

Includes KMW bottom metal

Price $1250 shipped Paypal ff, venmo, or zelle

.308 winchester
Remington 700, shilen barrel
Don’t know chamber specs
Lapua brass

I was shooting with a buddy and every 25th round or so the case head would separate on the brass (3 total). I took a couple of pieces and measured them with a headspace comparator and of course I forgot to write the numbers down but he was bumping the shoulders back .015” on his reloads compared to the fired case. I told him that’s more than likely the cause and offered to help him set up his dies properly. The problem, he has a few hundred rounds loaded up like this and it’s lapua brass. Is there any safe way to go about blowing them back out? Ie shooting them out of an ar 10 and then annealing them or pulling all the components and sending them out to be hydro formed? What about the other pieces that have been shot but haven’t split yet, are those still safe to use pending the dies set up correctly? I didn’t have an answer for him so I’m posting here.

Vudoo 3 Lug 60 degree bolt throw, Right Hand
Muller 16 twist 25” MTU contour stainless barrel Chambered by DI Precision
Eric Cortina Tuner
Trigger Tech Diamond Trigger, Right Hand, Flat trigger blade
MPA Matrix Pro - Color Titanium
Gray Ops Matrix Pro internal Weight Kit
Matrix Pro Magwell Plate - Magazine Blocker
Extra grip Included
2 Vudoo mags

Scope and mount NOT included.

Gun has less than 1,000 rounds. Pictures of last groups included below. 6 five shot groups @ 50 yards averaged .264”. Groups shot on 9/3/24. Will include target with rifle.

$3500 shipped - PayPal F&F - FFL must accept shipment from individual

Today’s feel-good story comes from Midtown Manhattan, where a reported 75 percent of arrests involve migrants.

New Yorkers voted for this madness by voting Democrat, specifically for Democrats who approve of New York’s sanctuary city and state status. These dummies also voted for a Biden-Harris administration that has imported millions and millions of unvetted illegal immigrants from the Third World.
In other words, there would be 75 percent fewer arrests and alleged crimes in Midtown Manhattan if Democrats like Kamala Harris enforced our border and deportation laws — or! — if New York’s idiot voters stopped voting for open-border Democrats. Instead, Democrats have decided to further destroy their own Democrat-run cities by importing the Third World.
“Across New York, recently arrived migrants are flooding the criminal justice system — at far higher rates than public officials have acknowledged,” reports the New York Post.
“Police sources shared with The Post a staggering estimate that as many as 75% of the people they’ve been arresting in Midtown Manhattan in recent months,” the report continues, “are migrants[.]”
And we are talking about crimes such as “assault, robbery and domestic violence.”
“In parts of Queens,” continues the Post, “the figure is more than 60%, sources there estimate.”

On any given day, Big Apple criminal court dockets are packed with asylum seekers who have run afoul of the law.
The problem is made much worse by sanctuary city laws that mean New York cops aren’t allowed to work with ICE on cases in which they believe suspects are in the country illegally. Additionally, the NYPD says it is barred from tracking the immigration status of offenders.

Click to expand...

Those aspects of the situation make it that much harder for law enforcement to do their jobs, as can be imagined.
I love these stories.
These stories make my day.
Few things are more just than making leftists live with the consequences of their insane policies and even more insane agenda.
For decades, places like Manhattan were immune from their own pro-illegal alien posturing. It was the border states that faced the brunt of this madness. But now that some smart border state governors have started shipping these illegals and migrants to the deep blue cities who say they want an open border, justice is at long last being served.
You want the Third World, you got the Third World.
Now the Third World is destroying your cities and your city budgets and your school system and your health care system.
Everyone in America should get what they vote for. Especially Democrats.

Kidd Classic .22 LR rifle
One 15 rnd mag included
Don’t know much about it except that it’s an all original Kidd rifle. Bought it on a whim awhile back and still haven’t gotten to play with it. Sticking with bolt guns.

$975 shipped to your FFL
(Lower 48, must accept from an individual)

PPFF, Venmo Gift, Zelle

For sale: My Zeiss LRP S3 6-36. This is the MIL version with the ZF-MRi reticle. Ran it a handful of times, condition is like new. Price is shipped. Will trade for the right *quality* carbon fiber tripod. Please do not inquire asking to trade other optics.

Pics: Login to view embedded media

For sale is my brand new never fired GA Precision bartlein barrel 6GT, trigger tech diamond, hellfire brake, Impact action. With a MDT ACC ELITE, with accessories.

$5,155obo for the complete rifle or can split chassis from barrel and action.

$2,195 for Chassis and accessories

$2,960 for impact,trigger,barrel,hellfire
——————————
Payment- Zelle, Venmo None Goods, certified check, wire transfer.- WILL NOT SHIP TO CALIFORNIA

Open to offers.

There is a guy selling a big generator transfer switch there on eBay but he won't ship it or even drop at a shipper. Need to find someone who can pick it up and drop it at a UPS store which can ship it to me.

Switch is about the size of a small suitcase. Not massive or heavy. Just bulky.

Glad to pay someone to pick up and get it to a shipper!

Cheers,

Sirhr

Located near Fort Benning, GA.

I have 2 x 8-lb jugs (from the same lot) and 52 x 1-lb bottles. I'm asking $275 for the 8-lb and $40 for the 1-lb, or all for $2000.

I can make a deal if someone wants a few jugs or several bottles either on price or possibly drive within 2 or 3 hours of Ft Benning, GA.

2 atlas Cal series bipods. One 419 arca with spike feet (camo).

and one QD picatinny with raider feet. Both come with rubber feet also.

200 shipped each.



Josh

Paul Harell Pre-Recorded "Goodbye". He passed today

Login to view embedded media

Because I have to prove that I earn my AIC creds enough to grant upgrades to complete assholes for others.

When I was 5, I remember my father, who had visitation rights with us (I was 3 when he and my mother divorced,) wake me up to see the moon landing and to hear Neil Armstrong say those words. "One small step for a man. One giant leap for Mankind."

And there were several more flights to the moon. Around 1970 ish, my mother was working for Phillips 66 in California and she was a key punch operator, which is how business computers were programmed back then. (After moving to Texas, her home state, in 1974, she would go one to learn COBOL and some Fortran and RPG and RPG II, specializing in RPG II while working for Schwepps Grocer Supply before his untimely death and that of her boyfriend, Lamar, in a plane crash.) Later, as an independent, she had clients such as First Bank - Houston and NBC. So, anyway, during the key punch days, the computer could take up half of a small building. The main frame at Philliops 66 took up a few floors.

And during this time, with computers about as complex and taking up an entire building, we went to the moon in basically a beer can. Several times.

And never again, since then. We "got rid of the technology."

The real problem is the radiation in the Van Allen Belt. This ionized layer actually protects us from a bunch of gamma rays, etcetera.

So, today, with superior materials and computers that can sit on a desk, why have we not been back?

Which leads to the question of did we go?

There, I think I have stirred up just enough feces...

I am seeking some advice in selecting my next optic for my bolt gun. I currently own 1 Accuracy International AT where I interchange 6.5CM and 308 barrels, the system works for me by having essentially two rifles one platform. So, the optic is the going to be the marriage that keeps this system operating between the two cartridges.

About me, I am a 51-year-old retired disabled combat veteran that balances my weeks between Hospice work, surfing and shooting long range. By no means am I looking to make a shooting team going to matches, nor am I going back to parachute assaults, shooting and blowing stuff up anymore. Shooting for me keeps the link between the past and present in a healthy balance.

The last scope I ran was a Nightforce ATACR 7-35, in which I told myself, “This was my forever scope” until unforeseen circumstances came about, and I sold it. Since I have sold everything that is not bolted down and now have about 3K’ish (preferably less) as my budget.

Given my circumstances I am considering doing the Arken 7-35 or Bushnell Match Pro ED for under $1k route, However, since this scope is going on my one rifle that is going to age with me, do I stay with the budget scopes, or swinging for the fences and try and find a ZCO and hold on to it until it becomes a relic?

Let me know your thoughts

Thanks y’all

Have an MPA BA Comp chassis for a 700 short action right hand in Burnt bronze.
Has full internal weight kit from MPA which includes their bag rider weight.

$625 Shipped ****SOLD*****

Torn Warriors Sniper Golf 2024
Just got back from a Sniper Competition held for Veterans up in the Mountains in Wells Nevada ! There was a huge turn out from former special operations types, Infantry Snipers, Grunts, etc ! I lost both legs in Afghanistan in 2010 with 3rd Bn 1st Marines Scout Sniper Platoon and they had me in a Land Cruiser driving to each stage and shooting out of the rear hatch, since it was difficult to maneuver the environment in a wheelchair ! Great group of guys and gals at Torn Warriors if you’re looking to donate ! They host this event every year Labor Day weekend ! I will definitely be going back ! Scoring is based of a golf par system ! So it’s very fun and unique ! Winds can get above 30mph easily some mil holds were 5.5 mils (308) short action calibers only ! (308, 6.5 cm etc) your boy didn’t place high but had a great time, and still learned from other shooters !

Have a Rim-x in 22lr
PVA 20 inch 1/12 barrel. Threaded for tuner
Timney HIT trigger straight shoe
2 magazines, 1 with a +2 extension

Rifle shoots sub MOA with SK match. I am sure it would shoot even better with some lot testing and better ammo. Don't have time for rimfire matches and centerfire matches.

$1500 Shipped to your ffl

Also Have 2800 rounds of SK Match ammo that I can include at an additional price

I had a gunsmith build a 7 mm prc using a heavy contour 26” 1-8 twist carbon six barrel. I have the barrel paired with a kelbly atlas lite action and grayboe Phoenix 2 stock. I have a nightforce nx8 scope and nightforce rings on a kelbly rail. I have 210 rounds through this barrel and have tried several good powders (h1000, rl25, retumbo, n565, n570, h4831sc) with hornady 175 eldx and 180 eldm bullets. I am using ADG brass. I cannot get any load to shoot better than about 3/4 moa. For comparison I reload for several factory rifles and have them all shooting below 1/2 moa. I expected to get Accuracy at least this good from this custom build. The gunsmith bedded the action because he thought the stock pillar bedding on the phoenix 2 was causing barrel deflection, but if anything the accuracy got slightly worse.

My gunsmith is recommending that I have the barrel cryogenically treated to improve accuracy. I have read threads on here that seem to have mixed advice on this and I haven't seen anybody discuss doing this on a carbon barrel, although I suppose it would work the same on the steel portion.

Basically I am looking for any and all advice on what to do. I don't claim to be an expert reloader, but with the success I have had with several factory guns, and the combinations I have tried with this gun, I feel confident that the issue is not with the load but with the gun.

Assume (miracle of miracles) that Pres. Trump is elected the 47th (and then certified by the Electoral College and congress) and inaugurated again on 01/20/2025). What should be his immediate priorities in the first month or so after inauguration? What should he do immediately, or "short term," keeping in mind that there will still be efforts against him or to remove him or sabotage his presidency? Should he "clean house" (I assume the transition team won't be getting much help at all from the Biden admin)? This, of course, assumes we also take back the Senate and get a favorable Majority leader, etc.

But what would you advise Trump to do in his first month or so after inauguration to protect himself? Who should he hire/fire day 1 (if they don't leave during the transition)? What would you advise him to do "tactically," right now, so he can do "strategic" things later on and "Make America Great Again?"

Scoured the threads and I’m between these two. I want 2 stage good for overall use that will last. I like the tactical and duty options - I’m not competition shooting but I’m on the market for something good for CQB and long range if needed.

Most posts say MTB-2S is best bang for buck but if 171 is not prob would you still say the LaRue over the Geisele?

Right now AR15 discounts has the Larue for 90 and Geisele is 171

20” Pale Brown, 2018 profile,6.5CM AI barrel purchased from Euro Optic last summer. M30 tenon for AXSR.

370 rounds on it. Used in a PRS 1-day match and RWS Finale last year. Cleaned it, oiled it, and haven’t shot it since.

153.5LRHT @ 2637 with H4350
140 ELDM @ 2706 with H4350
153 ATIP @ 2620 with eagle eye factory ammo

$650 shipped or willing to trade for a 300WM barrel.

Thanks

Hi guys
Im in europe and its hard to chose one rifle. Im not able to try them out before i buy one. Neither can i hold or see one before i buy one, only thing i can do is watch youtube and ask you guys for a decent opinion. Thanks for help.
I am looking for my first and only ar15.
Iv set up a short list of some of my choices, money is not an issue.

Please share your opinion on my list

I just put a used scope on my Remington nylon 66 and starting at 25 yards had nice groups on the bull. Moved out to 40-45 yards and the groups moved out about 3” right of the bull. Put my groups back on the bull at 40 and then at 25 it’s about 1” left of the bull. What can cause this?

As new Leofoto LN354C carbon fiber tripod. Comes with bag in Leofoto box. Used it maybe for a couple of matches and won another one.

$300 shipped CONUS