Trump is talking about abolishing the IRS, getting rid of income taxes, and looking more at tariffs, while reducing the size of the Federal government and its largesse.

He also is committed to getting rid of taxes on tips.

Login to view embedded media

derails?

For sale is a like new Nightforce ATACR 4-16x50 with Mil-XT reticle and Sphur C mount. I ended up selling the rifle this was mounted to and the scope has seen very little use. Everything works as it should and has no noticeable blemishes. I'm not looking to trade. Price for both items is $2000 shipped to lower 48. If you have any questions, please reach out.

They're obviously the transplants that moved to RR for the high-tech positions.

Need to make a trip to Montgomery, Alabama sometime this summer. Probably just for a couple of days. Visiting family friends that moved there last summer from lower Mich.. Trying to get my traveling mojo back up and running again. Not real motivated with all the crap happening at the border. Trying to be smart and not put us in a situation. Like to go back to Florida and head to Daytona Beach, Kennedy Space Center, Canaveral. But...people we are visiting can't do long days in the car. So, there's that. So I need local area stuff to see/do.
Thanks for any, and all help you people suggest. Mac

Just wondering how do we reset a scopes turrets. I own a Steiner M8Xi 1-8 scope, and I zeroed this optic on my rifle, and I also set the zero stop back to 0 so I can only dial up in mils, setting the zero stop is merely loosening two hex screws on the turret, and rotating the turret back to 0, then re-tightening the hex screws on the turret. However, once this is done you cannot rotate the turret down, or you cannot lower the reticle. You can only go up in turret elevation mil clicks. So, I’m wondering how would one go about resetting a scopes turrets and reticle to the factory defaults if mounting the glass to another weapon, so the reticle can be perfectly centered.

I have not been able to find much information on this. And I’m wondering how can the zero stop even be removed or restored back to default settings? Do I loosen the hex screws, dial the turret back up to factory defaults and tighten them again?


I appreciate all of the help.

Never fired* have had cased for years.

Nighthawk 1911 GRP w/ Rail with Surefire X300 ULTRA $3,250.00
Like NEW, it has not been fired other than at the factory.
Comes with 1 Nighthawk mag, 1 Wilson Combat mag, Test Target, all paperwork, key chain, barrel bushing wrench, test shell case and sticker.
Will ship or PPT in Sacramento CA.

Sold

Selling my Area 419 comparator kit. Don't use it, prefer the other set i have.
Light use on .243 bullet insert, and 350 hs insert
No issues what so ever. Factory boxes and packaging as shown.
$325 shipped tyd

I have a Manners PRS-TCS with the Sikes rail and manners arca rail and quick adjustment knobs. It is lived its life with a vudoo in it just decided to go to a chassis. $1,550 shiped.

Anyone know of a resume consultant experieced in working in the chemical engineering field?

I bought this from a fellow that bought it new with 200 rounds on it. I have not shot the rifle. The stock is very clean with no chips or scratches. It has a couple small impressions when you move the stock around in the light. The blueing on the barreled action is also very nice with a couple small marks in the bluing. It will also come withe the rings and bases that came with it. It is a very clean rifle. Believe I was told these have a 14 twist and a 26 inch barrel. The bad is I decided to remove the rings and put a pic rail on it. All the screws came out pretty easy but 1 of them had the head come off. So part of the screw is still above the receiver and I took a pick and tapped the edge of it to see if I could move it around. Yes it did happen, it slipped off and put a mark near the screw in the receiver shown in a picture. After I did that it went straight in the safe as I was ticked off. Decided to sell it off as I have a couple 223 AR rifles. The trigger is very nice on it and I took it out of the stock 1 time to clean it and it had a nice bedding job done to it.

795.00 shipped.....add 12.00 for the ride if you want it insured.

Shipped to your FFL from private owner and listed elsewhere.

looking for a bipod for the Bucket list rig, its heavy, figured I would check here before giving my lefty to the store owners Yatch fund. Gotta have heft, the beast is 52in long an well over 20lbs.

3 sealed 100 count boxes. 150 shipped.

Retired SF area cop & SWAT guy Keith Graves, a Conservative-Libertarian, is the guy behind two or three good sites/YT channels

As someone who occasionally posts in defense of the boys in blue, I have to bring this fucking idiot to light. I hope his fucking asshole rots out at least one year before he dies. What the actual fuck? Water them, feed them, then kill them. Fucking asshole!

Terminus Zeus quick change short action 308 bolt face. Small scratch on bolt shroud otherwise like new low round count. With triggertech special single stage flat shoe. No trades unless left hand. $1400 shipped my FFL to yours

You probably thought it was the last chicken in Africa and you would be WRONG!

The FASTEST animal on Earth is Me/Us when we hear those 2 words “CORPSMAN UP” or even the more frightening “DOC HELP”


And because of this we get the better discounts and so do our Marines.


Buddy of mine, fellow Doc sent me this pic today. I consider this to be proof.


cheers to my fellow Docs and DevilDogs!

Like new Gold Trigger Tech Diamond. Flat shoe single stage. Less that 50 rounds.
$300 shipped.

Infinity 9mm 2011 style custom pistol. Ordered in 2020 and delivered in 2021. I have shot it twice.

I paid just over 6k for the pistol. Will sell for $4,500.00 delivered to continental US.

It is a work of art. I just don't use it and I am selling to fund another project.

I can provide additional pictures and information as needed.

Ran across this Reddit thread last night. https://www.reddit.com/r/ar15/s/nqzWtjzXd3

From what I can tell, it appears to be some kind of PVD coating that can be used to treat both the interior and exterior of rifle barrels. I've read rumors around the web that Sig may be using something like this on the 277 Fury barrels to deal with what should otherwise be quite the barrel burner.

PVD/DLC is a line-of-sight coating, thus hasn't been implemented for barrel bore treatment heretofore.

I thought "what the hell" (had a couple adult beverages last night) and messaged the OP.

He directed me to https://rtcoating.com/ and said he handles sales.

Looks like they're based in Lititz, PA. About an hour and 20 from my AO.

I did tell him he should post here as you guys would definitely put his tech to the test.

Oh, btw, for those who aren't going to read the comments on Reddit (don't blame you), he's quoting $50 to treat barrels.

If something sounds too good to be true, it usually is, but again, this is interesting.

Area 419 master funnel kit
No issues, 6mm insert has been used a handful of times
I prefer my old funnels.
$85 shipped to your door