I have a new never fired Noveske Infidel G4 13.7" rifle in Bazooka Green with the stainless barrel, mag-pul pro flip ups and all of the originals from Noveske that come with this new. $2,900.00 plus shipping to where is accepted. Will be shipping from my FFL to yours. If you have questions please text me at 8five9-five9five-1three2two

Redding 223 Rem body die $20
Rcbs 223 Rem competition seater die SOLD
Redding 6mm dasher body die $20
Redding 6.5cm full length size die Sold
Rcbs 6.5cm small base die set $20

PayPal f/f or venmo

New GrayOps AW 12 round magazine. Have not been fired or used. $160 shipped.

WTS: atlas bt46 lw17 PSR bipod
$300 shipped

I've been using this Coleman pump for just over a year to cool my rifles and do groupings. Well it finally wore out on me. Anyone on here have a good cooling system they could share that'll last and maybe cool a bit better? I don't need it to be portable as I have plugs right above my stalls. I'm thinking of investing in a mini ac and funneling the air through a tube. I'm going through 300rds of .338 Lapua within 2 hours for context.

If anyone has insight it would be appreciated! I'm hoping this is the appropriate forum, reloaders would know more about this than anyone.

I bought 1200 rounds of Hornady factory 300PRC 225ELDM with the plan to shoot it over the next couple years and then reload those casings to as long as possible.

I went through 200 rounds of factory Hornady 300 PRC 225 ELDM and got sub MOA accuracy, immediately upon switching to a new lot number the group at 100yds is about 6 MOA. Switching to the old lot I'm getting sub MOA again. It's definitely the ammo(manufacturer checked the gun because that was my first thought). Hornady said they won't do anything about the ammo because the lot number meets there "minimum requirements" when it was tested and "every lot number is different so it's just the luck of the draw, you should have shot it before you bought that lot number". The really interesting thing is that the carbon marks around the casing neck are completely different. The good lot number has very minimal carbon at the base of the neck. The bad lot has a very dark carbon wavy pattern that goes all the way around. After checking all my lot numbers I have 500rds of this lot and another 200 from a different lot with the same wavy carbon marks and that group 4-6MOA in random directions at 100yds. Any insight on a solution or how to deal with Hornady would be much appreciated. If it's a brass issue I'm assuming I wouldn't want to reload these casings either.

I have a brand new Tangent Theta 7-35 gen 3 xr fine for sale- sold

References available on request.

Chris

Pack has been used with some stains, it ain't perfect but still does what it supposed too. Great pack for prs. $215 shipped, pp ff, zelle,venmo.

NY Bill to actually ban the sales of Glock handguns most likely to pass and be signed by the governor. They blame Glock for being relativity easy to mount the clock switch to it. What is unknown if the state will confiscate existing glock handguns from registered owners. Those who purchased on the street are safe from confiscation this time around, smart move on your part.

Have a hawkhill m24 26” 6mm dasher barrel. .104 free bore Chambered by Nomad precision for a defiance tenacity it does have 2k rounds on it. Accuracy never did fall off. Ran 105 hybrids at 2900-2940 its whole life. Asking $250 shipped obo

I have to move some AR gear.
Im moving to 6.8 spc

Barrels:

- SOLD Ballistic Advantage 8” 300 Blackout barrel
Used for 40-50 rounds max
I really need a 9” cause of my handguard
So I could trade for a 9” or $ 80 shipped SOLD


- SOLD 15” B.A.D. Mlok $ 100 shipped SOLD

Miscellaneous

-SHARPS BCG only fired 24 rounds bought it new last month , smooth as butter $ 170 shipped

Rigs / Mounts
-30mm Mostrum med rings $ 40 shipped
-34mm Arken med rings $ 40 shipped

Been on these forums for many years...first time ragging in the Bear Pit- but I'm pissed, and I know there's a lot of current and former US military that might care about who to support with their business- or not.

My son's a USAF pilot currently stationed in the midwest, just came home to visit in FL for a couple of weeks on leave.
In addition to all his other modern rifles, he's building a nice milsurp collection. We always do some shooting and fishing when he gets back home, and he had an eye for a WWII Mosin PU sniper and bought a nice one from an online dealer last week before leaving- and had it shipped to a local Shoot Straight here as he'd called them in advance to confirm they accepted transfers.

Picked him up at the airport last night, and this afternoon we drove down to pick up his rifle. Gave them his military ID and his new temporary DL as he just bought a home there and surrendered his FL DL- the temp DL is paper- but issued by the state, with photo, and is 100% legal, government-issued ID.

"Nope, sorry- can't do the transfer". We can't accept this temporary driver's license".

Now, I just surrendered my 07 FFL last month after 8 years due to moving and not having a new premises yet. Didn't do many transfers as a smith, but I know the rules of the game.

I said "What's the problem? His military ID is perfectly acceptable."
"We can't photocopy his military ID, and we can't accept his temporary DL"

Now, I'm trying to keep a cool head, which wasn't getting any easier. But knowing that an FFL can refuse to do a transfer for ANY reason- including if he doesn't like your fucking haircut- I tried to be diplomatic.

"His military ID is all he needs- and ATF does not require that you (illegally) make a copy. His DL is state issued, and a legal photo ID- even though he ONLY needs his military ID for compliance. These are YOUR requirements- and you can make any fucking rules you want- but you should have disclosed to him that your requirements for doing a transfer, exceed those which are legally required".

The dickhead manager pulled out a 4473 and gave me some bullshit about the forms changing (which they just did), but I pointed to the ID requirements and asked him "What's changed? Says in black and white that military ID is acceptable!" At which point he starts hemming and hawing with bullshit...

What's ironic is that he'd gone with some buddies to a NASCAR race in a neighboring state before flying home, stopped in a Bass Pro Shops and they happened to have milsurps on the rack (go figure..) and bought a nice Swedish Mauser using the same ID's that Shoot Straight refused to accept.

Figured I wasn't getting anywhere with him, and left to cool off. After the 20 minute drive home to cool down, I called back.
"Listen, I know you guys can do whatever the fuck you want, so screaming and yelling isn't going to be productive. This is how you treat those who serve our country? Are you kidding me? Can I speak with ownership?"

"Nope. It's our policy, and they won't make an exception".

So I call another FFL closer to me, less than 10 miles from Shoot Straight. Explained the sitch. "Yeah, no problem. I'll accept that ID".
Called Shoot Straight back. "It'll be $50 PLUS the shipping costs to send it to the other FFL".

No "Sorry we didn't disclose", No "Sorry about the inconvenience- we'll waive our $50 fee but he'll need to pay just the actual shipping costs".

FUCK SHOOT STRAIGHT- ALL THEIR FLORIDA LOCATIONS. I used to frequent their Tampa range on occasion- I won't set foot in their stores forevermore if this is how they treat our military.

Rant over. Act accordingly.

We just received a batch of TBAC Suppressors. We had a few Magnus 30 CB, HUB, and SR suppressors show up along with a handful of FLY 9 and 22 Take Down Suppressors. We also received a couple 338 Ultra SR suppressors as well. Shoot us a message if you are interested in picking one up.

TBAC 338 Ultra SR - $2199
TBAC Magnus CB and Hub - $1599
TBAC Magnus SR - $1899
TBAC Fly 9 - $1160
TBAC 22 Take Down - $415

Login to view embedded media
Immunity claim for killing cyclist while driving recklessly on duty .
Not a high speed chase - no emergency.

Barely used/excellent condition RRS TVC-22i MK2 Tripod w/Anvil-30 Head. Only used a couple of times and decided to go with something different. I will only sell to established Hide members that have positive feedback history with other transactions. $SOLD shipped to the lower 48 via UPS adult signature required. PayPal F&F for the form of payment.

Owens Armory Free rebarrel for sale $150 obo.

Includes chambering, muzzle work, 1 color of cerekote. States buyer must provide/purchase barrel blank and cover shipping. Expires 3/10/2025

Will send a picture of the cert and mail it if requested.

SOLD

After 8 months the manners is here but I like my chassis better. So now it’s for sale.
$ shipped to you.

Wondering what everyone is using to replace Trail Boss. I just used up the last of mine. I was only using it for light 300 blackout bullets in a bolt gun. Great for teaching the grandsons.

Because eotech won't answer their telephones or won't hire more people to do so, I need a source for a battery compartment and contact replacement kit for a Oct 2008 hws 558.

I have over a hour with 3 separate calls waiting for someone to pick up the line.

I didn't pay 800 dolla for this kind of shitty customer service.

* Selling for a friend*

Up for grabs is my custom PRS ready 6MM Dasher. Asking $5,500 for the whole package. It is extremely accurate and has approximately 800rds down the barrel. I was wanting to get into competition shooting but ended up not having the time to invest and so I am going to get rid of it. My loss is your gain. The MDT CKYE-Pod in the photos is not included.

Here are the details:

-Impact Precision Action
-28” Proof Competition Contour Barrel

-Axis Works Brake
, MDT 10rd Magazine

-Trigger Tech Diamond Trigger

-Hawkins Precision rings with diving board and offset level
-
Leupold Mark 5 5-25x56mm PR-2 MIL Reticle

-XLR Envy Pro Chassis with the PRS competition kit, thumb shelf, and folding TR-2 stock

Included is just shy of 100 pieces of fired brass, 
1,000 CCI magnum small rifle primers
, 2lbs of hodgdon varget
, And just over 700 110 gr. Hornady A-Tips. I am able to ship powders and primers HAZMAT.


If you have any questions or would like some more photos or details please feel free to reach out! Would prefer not to split and sell as a package.

I know how to mechanically do this...twist the ring against the occular. However, it always seems to come un-done/loose as I shoot throughout the day---even short range sessions---even when I hit it with my purse. I know the ATACR is an issued optic...how is this being addressed, typically, by those it is issued to? Is there "a common way"? I've seen everything from electrical tape on Kyle Defoor's to being told to use a small drop of VC3 or loctite.

Have a railchanger schmedium bag with the railchanger arm/clamp combo for sale. Used this in matches last year but have found myself becoming a one bag kinda guy and figure someone else would benefit from this piece of kit. Total cost new of the 2 items is $210, will sell for $160 shipped for both.

Like title says. Have a brand new vortex razor gen 3 6x36x56 mrad ebr-7d for sale. Brand new never used or mounted.
Central tx
$2200 shipped and insured

Split rail 787 Action with magnum bolt
-20 moa split rail
-Proof 22” 1/8t 7PRC prefit with TBAC SR brake
-160 rounds of hendershot ammo (180 Berger hybrids in ADG brass) and approximately 140 once fired pieces of ADG brass.
*stock/bipod/other components not mentioned are not included*

Approximately 250ish rounds of 7prc on the barrel/action.

-$2000 gets the lot. FTF in western WA or shipping can be discussed (ffl-ffl, etc). Not splitting action/barrel/ammo unless there’s buyers for each.

Going back to a full rail action and been enjoying shooting heavy 30s lately. Someone can enjoy a solid lightweight hunting barreled action.