Filter

I don't see this happening but in the times we are in? Possible sale of LC

Eotech help.

Because eotech won't answer their telephones or won't hire more people to do so, I need a source for a battery compartment and contact replacement kit for a Oct 2008 hws 558.

I have over a hour with 3 separate calls waiting for someone to pick up the line.

I didn't pay 800 dolla for this kind of shitty customer service.

Firearms 6 Dasher PRS rig - Preece Precision, Impact, XLR

* Selling for a friend*

Up for grabs is my custom PRS ready 6MM Dasher. Asking $5,500 for the whole package. It is extremely accurate and has approximately 800rds down the barrel. I was wanting to get into competition shooting but ended up not having the time to invest and so I am going to get rid of it. My loss is your gain. The MDT CKYE-Pod in the photos is not included.

Here are the details:

-Impact Precision Action
-28” Proof Competition Contour Barrel

-Axis Works Brake
, MDT 10rd Magazine

-Trigger Tech Diamond Trigger

-Hawkins Precision rings with diving board and offset level
-
Leupold Mark 5 5-25x56mm PR-2 MIL Reticle

-XLR Envy Pro Chassis with the PRS competition kit, thumb shelf, and folding TR-2 stock

Included is just shy of 100 pieces of fired brass, 
1,000 CCI magnum small rifle primers
, 2lbs of hodgdon varget
, And just over 700 110 gr. Hornady A-Tips. I am able to ship powders and primers HAZMAT.


If you have any questions or would like some more photos or details please feel free to reach out! Would prefer not to split and sell as a package.

IMG_4562.jpegIMG_4566.jpegIMG_4567.jpegIMG_4568.jpegIMG_4569.jpegIMG_4577.jpegIMG_4578.jpegIMG_4579.jpegIMG_4576.jpeg

How to "lock" Nightforce 1-8 diopter?

I know how to mechanically do this...twist the ring against the occular. However, it always seems to come un-done/loose as I shoot throughout the day---even short range sessions---even when I hit it with my purse. I know the ATACR is an issued optic...how is this being addressed, typically, by those it is issued to? Is there "a common way"? I've seen everything from electrical tape on Kyle Defoor's to being told to use a small drop of VC3 or loctite.

Firearms Impact 787 BA

Split rail 787 Action with magnum bolt
-20 moa split rail
-Proof 22” 1/8t 7PRC prefit with TBAC SR brake
-160 rounds of hendershot ammo (180 Berger hybrids in ADG brass) and approximately 140 once fired pieces of ADG brass.
*stock/bipod/other components not mentioned are not included*

Approximately 250ish rounds of 7prc on the barrel/action.

-$2000 gets the lot. FTF in western WA or shipping can be discussed (ffl-ffl, etc). Not splitting action/barrel/ammo unless there’s buyers for each.

Going back to a full rail action and been enjoying shooting heavy 30s lately. Someone can enjoy a solid lightweight hunting barreled action.

Attachments

  • IMG_0107.jpeg
    IMG_0107.jpeg
    248.2 KB · Views: 159
  • IMG_0102.jpeg
    IMG_0102.jpeg
    691 KB · Views: 165
  • IMG_8027.jpeg
    IMG_8027.jpeg
    579.7 KB · Views: 157
  • IMG_0111.png
    IMG_0111.png
    1.8 MB · Views: 172
  • IMG_0112.png
    IMG_0112.png
    960.2 KB · Views: 155
  • IMG_0113.png
    IMG_0113.png
    1.4 MB · Views: 150
  • Love
Reactions: car16smg

SOLD XLR 4.0 Element $725 shipped

Element 4.0 aluminum
Nrl hunter project not going to happen
Obi attachment
Vertical grip
REM 700 sa
Thumb rest
Bag rider
Nice condition
Skip the 6 month wait
$725 shipped
PayPal friends

Attachments

  • IMG_1154.jpeg
    IMG_1154.jpeg
    574.4 KB · Views: 171
  • IMG_1153.jpeg
    IMG_1153.jpeg
    299.9 KB · Views: 169
  • IMG_1152.jpeg
    IMG_1152.jpeg
    376.5 KB · Views: 143
  • IMG_1151.jpeg
    IMG_1151.jpeg
    318.6 KB · Views: 153
  • IMG_1150.jpeg
    IMG_1150.jpeg
    566.7 KB · Views: 172

Firearms Heckler & Koch HK91/ PSG1 - FS or Trade

I got this in a trade I didn't have a chance to shoot it but it functions and looks complete seller I got it from said it shoots sub moa. Its an HK91 modded to be a PSG1 Clone. It includes the original parts to return it to stock which are also in fantastic shape considering the age of this rifle. Its highly collectible and in very nice shape just not really an HK guy myself. Comes with loads of mags the HK cleaning kit and a very nice fully functioning Zeiss optic. I'm open to offers and partial trades. Trades I'm interested in are clone rifles of all kinds, AI stuff ideally an AWM or a .300 and up AI. .338+ caliber rifles such as Barrett. Sale price $7,500 $7,000 shipped from me to your FFL located in MT. Thanks
IMG_5029.JPG

Attachments

  • IMG_4989.JPG
    IMG_4989.JPG
    400.3 KB · Views: 270
  • IMG_4990.JPG
    IMG_4990.JPG
    404 KB · Views: 226
  • IMG_4991.JPG
    IMG_4991.JPG
    369.7 KB · Views: 229
  • IMG_4992.JPG
    IMG_4992.JPG
    416.2 KB · Views: 223
  • IMG_4993.JPG
    IMG_4993.JPG
    368.3 KB · Views: 220
  • IMG_4994.JPG
    IMG_4994.JPG
    269.2 KB · Views: 214
  • IMG_4995.JPG
    IMG_4995.JPG
    321.9 KB · Views: 205
  • IMG_4996.JPG
    IMG_4996.JPG
    352.8 KB · Views: 191
  • IMG_4997.JPG
    IMG_4997.JPG
    351.8 KB · Views: 186
  • IMG_4998.JPG
    IMG_4998.JPG
    333 KB · Views: 178
  • IMG_5003.JPG
    IMG_5003.JPG
    357.7 KB · Views: 200
  • IMG_5006.JPG
    IMG_5006.JPG
    369.8 KB · Views: 183
  • IMG_5014.JPG
    IMG_5014.JPG
    384.6 KB · Views: 180
  • IMG_5015.JPG
    IMG_5015.JPG
    302.3 KB · Views: 172
  • IMG_5016.JPG
    IMG_5016.JPG
    577.8 KB · Views: 153
  • IMG_5017.JPG
    IMG_5017.JPG
    310 KB · Views: 153
  • IMG_5018.JPG
    IMG_5018.JPG
    328.6 KB · Views: 145
  • IMG_5019.JPG
    IMG_5019.JPG
    507.6 KB · Views: 146
  • IMG_5020.JPG
    IMG_5020.JPG
    422.4 KB · Views: 145
  • IMG_5021.JPG
    IMG_5021.JPG
    391.1 KB · Views: 147
  • IMG_5024.JPG
    IMG_5024.JPG
    451.2 KB · Views: 134
  • IMG_5026.JPG
    IMG_5026.JPG
    478.1 KB · Views: 144
  • IMG_5027.JPG
    IMG_5027.JPG
    460.5 KB · Views: 142
  • IMG_5030.JPG
    IMG_5030.JPG
    526.4 KB · Views: 224

SOLD 6.5CM Accuracy International Barrels $550

These are barrels I got with my AIs, I shoot .308 so I'm sending them down the line. All M27

26" MHSA carbon fiber barrel. Great shape around 50 rds through it SOLD
Tan 24" AI marked barrel with flats. Few hundred rds through it SOLD
Black 24" MHSA marked barrel no flats. Around 50 rds through it SOLD

Maybe will partially trade for a beefy .308 barrel 20-26"
IMG_2916.jpeg
  • Like
Reactions: xxflyingturtlexx

Reloading Equipment Super Trickler with FX120i

Looking to sell Super Trickler with FX120i scale. Has less then 200 throws on it. Bought 2 but ended up only needing one. $1500 shipped.

Sold pending funds

Attachments

  • 73682605580__201734EE-411E-44EF-A3B5-A120D0B735FC.jpeg
    73682605580__201734EE-411E-44EF-A3B5-A120D0B735FC.jpeg
    307.4 KB · Views: 192
  • 73682607571__ED512C3F-25B7-4D5C-B3FD-732D3497B771.jpeg
    73682607571__ED512C3F-25B7-4D5C-B3FD-732D3497B771.jpeg
    342.3 KB · Views: 153
  • 73682617860__A61D4BC8-9B0A-4F5F-BB87-789C49D0FA54.jpeg
    73682617860__A61D4BC8-9B0A-4F5F-BB87-789C49D0FA54.jpeg
    256 KB · Views: 158

Firearms Terminus zues QC standard bolt

As the title states, 308 bf zues QC for sale.

Must be able to ship from me to your ffl.

$1250 shipped
Wolnt be able to ship til Friday . I travel for work.

First “ I’ll take it” in the comments gets it.
Postal money order preferred

Attachments

  • IMG_1785.jpeg
    IMG_1785.jpeg
    491.9 KB · Views: 180
  • IMG_1782.jpeg
    IMG_1782.jpeg
    474.1 KB · Views: 185
  • IMG_1786.jpeg
    IMG_1786.jpeg
    656.1 KB · Views: 171
  • IMG_1781.jpeg
    IMG_1781.jpeg
    674.4 KB · Views: 187

What exactly is Trump on trial for?

Serious question - but this is the Bear Pit so you do you, I won't be offended

I've been trying to follow along the trial in NY where Trump is alleged to have paid some dollars to a couple of ladies to not speak about any encounters with DJT but still haven't figured out how any of this could be illegal, as in criminal. But I know there's shit on the books that make stuff illegal that you would never think would be so could one of you SH Legal Scholars shine some light ?

If you could help me out, I'd sleep better.
  • Like
Reactions: Doctorwho1138

PRS Talk PRS Tac Class 308 Win

Anyone in here actively compete in Tac Class? Ive finally put my 308 rifle together and just curious if im thinking the wrong way here. Ive bought quite a bit of the 177SMK and have little load data on them but have found 2 nodes with these around 2600 and one around 2690....I can push them harder but since most of the matches are 1000yds or less is it really needed? I have always bought bullets on the heavier end of the spectrum and then tried to shoot them at max distance just trying to find the limits of the cartridge but it is seeming like some of the guys are having good success with the 155 bullets in which i have never tested. Is there enough positives to actually try to switch over to these and what is your prefered bullet?

177s
Moderate recoil
545ish BC
2600-2700fps
Target splash
Dirt splash

155s
Less recoil?
520 BC?
2800+fps?
?
?

Just curious as to what is actually winning in this class as it seems like there is no coverage on anything but Open.

Cases not fire forming and carbon at case head

Hey everyone so I'm trying to figure out what's going on here. This brass pictured is out of a .22bra chamber the fire forming method used is the false shoulder. So these cases are from the 2nd firing and the resizing die used is the SAC modular BRA die. All the pieces of brass that had this happen were short on headspace by about .003. my theory is that either maybe my chamber is bigger then the sac sizing die or maybe I bumped the shoulder to far back. Let me know what you guys think
1000000178.jpg
1000000176.jpg
1000000177.jpg

End of an Era: Boy Scouts of America Officially Changes Name to Embrace Inclusivity After 114 Years!


The “woke virus” continues to spread in America.


The Boy Scouts of America has announced a major rebranding as it transitions to “Scouting America,” marking the first name change in its 114-year legacy.


The move is part of the organization’s bid to distance itself from its troubled past marred by a torrent of sexual abuse claims and subsequent bankruptcy while simultaneously embracing “inclusivity.”



The Gateway Pundit reported that the organization was nearly bankrupt after a series of woke decisions, including changing its policies to allow gay leaders and allowing girls to join. Those decisions had a major impact on the organization’s bottom line.


This change is yet another surrender to the ongoing “woke” agenda permeating longstanding American institutions. This is another surrender to political correctness, prioritizing superficial inclusivity over the core values that once made the Boy Scouts an iconic organization.


For over a century, the Boy Scouts of America has stood as a pillar of traditional American values, providing millions of young boys with formative experiences focused on leadership, self-reliance, and camaraderie.


In its press release, Scouting America stated that the change will take effect on February 8, 2025, coinciding with the organization’s 115th anniversary.


“The Boy Scouts of America will rebrand to Scouting America, reflecting the organization’s ongoing commitment to welcome every youth and family in America to experience the benefits of Scouting,” the organization said.


President and CEO Roger A. Krone claimed, “Though our name will be new, our mission remains unchanged: we are committed to teaching young people to be Prepared. For Life. This will be a simple but very important evolution as we seek to ensure that everyone feels welcome in Scouting.”


The name change is meant to reflect the organization’s supposed commitment to inclusivity following decisions in recent years to allow openly gay members and leaders and welcome girls into the ranks.


AP reported:


The organization steeped in tradition has made seismic changes after decades of turmoil, from finally allowing gay youth to welcoming girls throughout its ranks. With an eye on increasing flagging membership numbers, the Irving, Texas-based organization announced the name change Tuesday at its annual meeting in Florida.
“In the next 100 years we want any youth in America to feel very, very welcome to come into our programs,” Roger Krone, who took over last fall as president and chief executive officer, said in an interview before the announcement.
The organization began allowing gay youth in 2013 and ended a blanket ban on gay adult leaders in 2015. In 2017, it made the historic announcement that girls would be accepted as Cub Scouts as of 2018 and into the flagship Boy Scout program — renamed Scouts BSA — in 2019.
There were nearly 1,000 young women in the inaugural class of female Eagle Scouts in 2021, including Selby Chipman. The all-girls troop she was a founding member of in her hometown of Oak Ridge, North Carolina, has grown from five girls to nearly 50, and she thinks the name change will encourage even more girls to realize they can join.
“Girls were like: ‘You can join Boy Scouts of America?’” said Chipman, now a 20-year-old college student and assistant scoutmaster of her troop.
Within days of the announcement that girls would be allowed, Bob Brady went to work. A father of two girls and a proud Eagle Scout himself, the New Jersey attorney eagerly formed an all-girls troop. At their first weekend gathering with other troops, the boys were happy to have the girls involved but some adult leaders seemed concerned, he recalled. Their worries seemed to melt away as soon as the girls led a traditional cheer around the campfire.

The very name “Boy Scouts of America” carried a timeless and specific message, one that emphasized the unique journey of boys learning to become responsible men. The removal of the word “Boy” in favor of a more neutral moniker is unnecessary and eroding concession to modern pressures.

AI AT Elevation issues at 1000yards?

So after a few matches, im noticing my AI AT in 308 is having some elevation issues... my load is 190 gr smk, 43gr varget, cci br2 primers, nosler brass, 2.85 oal. The bolt for the quickloc is torqued to 65inlbs as I got the best repeatable POI at that setting. My SD and ES for that load is 3 std and 8 es. Honestly I'm not sure what it could be. Could it be the clamp in the quickloc system just getting stretched at that torque spec? I'd check every bolt on the rifle and they are all nice and tight.
1000019600.jpg

SOLD GONE! Wilson Combat “Cave Gun” & Nighthawk 1911’s

I’ll schlep myself out back into Horta’s Palace of Pew later for fauxtoes, but…

Wilson Combat’s coveted “Cave Gun” that was made specifically for a group of Tier-0 dudes in AFG some years back. Full-size .45 1911 with rail. All factory original kit with WC bag, mags, accessories, etc. Sweet shooter, but haven’t popped off a 45-cal round in 5 years, hence the Safe Queen sell-off.

I’d guess 5-7 mags through it — 10 tops. No clue what real value is, so I’ll just plop $4K on it and take offers from there. It was hawt stuff at one time, no idea if it’s still a sought-after thing now or what.

Two Nighthawks — 1) GRP in Burnt Bronze with super grippy handles. All factory. Love this gun, but haven’t put a round through it in half a decade. I’ll pull it out sometimes just to look at it. It’s all old skewl. No rail, no milled slide. All original factory bag, accessories, mags, etc. Maybe 20 mags through it lifetime. Call it $3500 OBO. Again, no idea what they’re worth today.

NH2) Kickass 10mm Longslide, also in Burnt Bronze. Doh! Not bronze. Wood color grips body in black, identical to this one listed on GB. Exactly one 50-round box put through her. All factory stuff, including seriously schweet custom leather OWB holster that works perfectly for BOTH the 10mm and the GRP. Call it $4000 OBO.

Shipped to FFL or can do FTF with AL residents. C’mon by an Choot’em!

Forgot I had a custom Kydex holster made for the Wilson with a Streamlight TLR-IR “Vampire” WML (seen in pics, and will include both holster and light for lucky buyer).

Lastly, I keep my Safe Queens pretty wet with CLP or CleanzOil for long term storage, so you’ll see a little seepage in the photos.

There be PICS up in heeeeyah:

IMG_8391.jpeg

IMG_8392.jpeg

IMG_8393.jpeg

IMG_8394.jpeg

IMG_8395.jpeg

IMG_8397.jpeg

IMG_8398.jpeg

IMG_8399.jpeg

IMG_8401.jpeg