Hey folks, Looking to sell the following:

SOLD 20-rd KAC mags. White follower, all KAC stamped

1x 10-rd KAC mag. White follower. $90 shipped.

2x KAC/Eagle SR-25 double mag pouches. $80 shipped for both.

3x KAC/Eagle Sr-25 10-rd mag pouches. $120 shipped for all 3.

Prices are shipped to CONUS. Located in UT for local sale. Venmo or PayPal preferred.

Sold a couple rifles and unloading.

WTS 6.5 CM Ammo:

All in original boxes.
PayPal F&F or Venmo preferred. Don't like the price...make an offer.

Very lightly used, only 40 rounds down the Proof Research barrel!
I was able to shoot a 1/2" 5 shot group after sighting in.
This rifle is guaranteed by Sig to shoot at least sub moa.
I bought this rifle for hunting Elk and it's just not going to happen this year.

Rifle with everything shown in pics is $3300 + Shipping.

Rifle only- $1900 + Shipping

Scope is a Steiner T6XI 5-30 Green Illumination MSR2 Mil Reticle sitting in an ARC 34 mm mount w/ bubble level.

Bipod is a UTG above bore bipod (Chinese but made well). I have all the original packaging and OEM materials for every item.

I'm willing to take some trades + cash for the right deal. NO GLOCKS, P320S, OR GARAGE BUILDS PLEASE! Some trade interest for me are:
Bullpups, VHS-2/Hellion, WLVRN, and some semi auto pistols, Garmin's new chrono, tactical gear etc.

Cross posted.

For sale, very good condition Vortex Razor Gen 3 6x36 MRAD. No marks, lenses are as new.

Comes with, box, sun shade, scope caps, warranty card, manuals, and zoom ring.

Price: $old shipped
No trades, please see my feedback. Many happy customers.

Have two regulator lowers, for Sig mcx. Brand new unfired. Asking $300 each, shipped to your ffl.

I have 2 Bartlein barrel blanks up for sale.

1. 29" M24 30 cal, 9.5-8.5 gain twist - SOLD Shipped
2. 29" Heavy Varmit 22 cal, 1-8 twist - SOLD Shipped

Like new with a lot of extras

Enclosed arca rail

Original black front rail and a green one plus all the extras lop spacers pic rail etc.

550 shipped

First off I have a Cheely 4.25 tactical frame (carbon steel). I had a gunsmith fit this stainless steel slide to the frame. It comes with a 9mm rock island barrel that I rough fit to the slide. SOLD

Next I have a 5” stainless steel frame. I got this in a parts lot I bought off gunbroker.com a few years back. I don’t know anything about it. I can try and answer any questions you may have. It does have a hand engraved serial number, and location of origin on it. It was shipped through an FFL to my FFL.
SOLD

Used Staccato P grip with custom stippling and added texture under trigger guard. Comes with mag release, and new long shoe flat trigger. $315 shipped

New Wilson Combat beaver tail safety.
$30 shipped

Also pictured is a Prodigy tree bark grip I post for sale in the parts classifieds. Comes with mag release, magwell and mainspring and plunger. SOLD

Dawson Precision magwell $30 shipped

2011 stainless steel pin kit $20 shipped

Might trade for a 4.25” Springfield Prodigy
I accept VENMO, Cash App and PayPal. If not using friends and family then buy will cover all fee’s.

As title states, thinking about switching the 223 AR15 to one of the above.

Would shoot the factory Hornady ELD-X or ELD- VT ammo.

Which one would be the most accurate? Which one would be more effective on coyotes under 500 yards.

Realistically all shots will be within 200 yards.

I’m torn between the two. Thanks in advance.

Hi all -
I was following a recipe for something called a "Carolina Load" for my 6.5CM, except I wanted to use H4831 instead of the H4831SC that was suggested. This is my first time reloading anything, and I don't yet know a lot about various different powders (except from a chart of fast vs. slow burners), but this particular recipe called for 44.3gr of the H4831SC.
I also realized that I bought the wrong bullet for the recipe, but I figured the overall fitment between the two might be minimal, so I proceeded (I have a Hornady 140 gr ELD Match, instead of the suggested 140 gr SST).
Long story short...I cannot fit 44.3 gr of powder in the case, and still install the bullet to COL of 2.800". It's such a compressed load that the bullet cannot be seated that deep and the bullet is mildly damaged when I attempt to seat it at that COL.
Is the physical shape of the power's granule quite different between these two powders? Is the Short Cut powder much smaller in size? I can't find a lot of information about the powder differences.
Thanks!

I just got a 6 dasher that I put together. Zermatt origin with proof pre fit 26" barrel. Brand new alpha brass srp. At 31.7 with varget I got a blown primer didn't come out but it had carbon ring around it and a hole. I started with shooters world precision and had it do the same thing at 31.5 with heavy bolt lift so I stopped cause I was just looking for pressure with the powder and just switched to varget. I did 5 rounds at 31.7 and didn't have a problem with the other 4 rounds but the 1 round had the problem. Shot 5 at 32.2 and they didn't have any problem or heavy bolt lift. I'm using winchester #41 cause it's what I have and I didn't think it would be a problem but is that the problem? Do I need to switch primers i do have some cci450. I also noticed my bolt now has 2 little dimples on the face is it trashed now to?

Up for grabs is a limited edition Barrett M107 Mil kit. This rifle features coyote cerakote, coyote plastics, a 29” .50 BMG barrel, 4 magazines, pelican case, UID sticker, and manuals. Everything is in new condition and unfired.

Price: $13,000 $11,750 shipped

Like his RINO hopes still matter. That mf'r is trash.



Login to view embedded media

Few questions on shooting in the prone position. Shooting an ar platform and just going through repetitions for groups but need some advice.
1. To load or not to load the bipod. Should bipod be at the muzzle or half way. I personally feel better not loading.
2. Rear bag should it be tucked firm under my arm and armpit. I squeeze with my left hand for reticle adjustment.
3. Can there be to much pressure from my cheek to stock while shooting.

I am working on not grabing and adding any other tension while firing. These are just a few things that came to my mind. I am also realizing i may have to bring my scope back some to my natural resting spot and not force my eye forward. Thanks again for the advice and knowledge.

I have a 30 cal barrel blank I would like to have chambered for my AXSR. I have contact a few places, but they won't chamber metric since it's a pita to switch to metic threads as I was told. What are you your places?

Gen 2 Razor 3-18x50 mils
$1200 PayPal f/f $120 extra if you want a set of Nightforce rings with it. Also comes with throw lever and defender front cap

In this thread it is encouraged to post epic rants.......be it from YouTube ,X or wherever......... this includes bear pit rants.

The video below is a great illustration......... School is in session........@sirhrmechanic is excused from class, as he seems to have ranting ( which I love and enjoy) down to the T

Login to view embedded media

thinking of putting one on an older A bolt for range use only ,any thing to look for /stay away from ?

Abdi Yusuf Hassan was arrested in Minneapolis in 2019 after he became a naturalized U.S. citizen.

This is wrong in so many ways.

First off, if this is somehow in the wrong place, my apologies. Mods, please move elsewhere if appropriate. Thanks.

Beginning to study suppressors for my Tikka Super Varmint in 6.5 Creedmoor. Range gun. Is there such a thing as a suppressor, I suppose .30 cal, in a $ range of 500 to 700 or so that someone could recommend? I’m a real neophyte at this and it seems really complicated. Thanks in advance for any help.

Howdy Hide,

Figured this is the best forum to post this in. First things first- I'm a big fan of Glocks and own a bunch of 'em and bought a new one as recently as last week. Just to illustrate that point, below is a picture that I've shared here of my collection of Glocks chambered in 45...




Hopefully that serves to illustrate that I'm a fan of their product and not bashing them. That said, I did have to use their customer service/warranty recently and just wanted to share my experience with the Hide and hope that it may be of some help to others down the line if they too find themselves going down a similar path and find this thread through a search. Bottom line up front, I'm neither miffed nor impressed with how things worked out, but rather somewhere in the underwhelmed/indifferent mindset after bringing this effort to a conclusion as of today.

To start with- I should begin where all good stories begin, at the beginning and what started this exchange. I have a G19.3 purchased NIB in 2009 and the pistol has been an absolute rockstar ever since I owned it. I don't mean to overestimate the round count but after 15 years, I'd say that it likely is in the ballpark of 10K rounds. All factory ammunition using brands such as S&B, WWB, UMC, Blazer, Magtech, etc. There was about 1-2K rounds of NATO spec ammo and maybe 500 rounds of +P. I know that I've replaced the recoil spring at least twice (so minimum of 3 OEM recoil springs since owning it NIB).

So with that said- I'm a bit on the neurotic side when it comes to cleaning my firearms, doesn't matter if I put 50 or 500 rounds through it, it just bothers me to go to bed with a 'dirty' pistol. Well about 2-3 years or so ago, I was cleaning the pistol and noticed that there was a chip on the outside of the barrel with what appeared to be a hairline fracture that went from the chip all the way to the 12 o'clock position of the barrel. Truth be told, I already had a backup G19 so I took the Gen 3 out of rotation figuring I'd bring it to a GSSF match and have an armorer look at it for free but between COVID, work, and life, what was supposed to be a pause intended to only be a couple of months turned into years and this year I finally had the craps of having a pistol on the sideline for so long and decided to reach out to Glock's customer service.

Before I get too far, I know the pictures aren't of the greatest quality but I'll throw the pictures of the issue I'm describing here below-




Since I know it's not the best quality, I'll also throw in a crudely edited picture of the area in question...




Not sure if it'll come through but as members here are well aware, this is the part of the firearm subjected to tens of thousands of PSI each and every time a round is fired during normal operation so naturally I was concerned about metallurgical issues at this point which is what caused me to seek Glock's opinion on the matter.

Alrighty, this post is getting long so I'll end it hear and pick it up in a subsequent post.

-LD

The current system shows how many "likes" someone has been given. I have noticed that some members have never "liked" another post but seem to collect many.

Maybe both could be shown or just a ratio?

Brand new in the box TT 5-25x56 with jtac reticle. Only opened to finger, never been mounted or outside the house. I can take more pictures if needed.

$4500 shipped and insured.