Have a Rimx from Fred at Bison Tactical. Has 24 inch barlein heavy palma barrel spun up by Jonathon at Modacam Custom Rifles. I have had this couple years and never ahoot it much. I have way to many of these. Shoots lights out like any of jonathons barrels! Has less than a thousand rounds. Extention on mag as well as the original base plate. 1600 shipped.

I have a Falkor Caitlyn that I won at an SHC event many years ago. Some of you here have probably shot this exact rifle.

To mix things up from bolt guns, I decided to make this rifle an "SPR". Today at the range I shot some IMI Razorcore 77 and Blackhills 75 match HP ammo. I shot a lot more IMI than the Blackhills, but both ammo produced groups in the 1.25-1.50 MOA range. One group with the IMI was just barely sub 1 MOA. This rifle has a carbon fiber Proof 16" barrel for those curious.

While I understand these are not bad groups for an AR-15, I was hoping for it to be closer to 0.75-1 MOA. This seems to be wishful thinking at this point. However the barrel is likely way over due for a cleaning, so this may be a factor as well.

But while at the range, I ejected a few rounds that were chambered but unfired, and noticed some pretty deep gouges on the ogive of the bullets. My understanding is that this is caused by the feed lips in the barrel extension. I emailed Falkor, they didn't seem too concerned with it. I know that this is a somewhat normal thing with AR-15's, however I can't help but think that these gouges wouldn't have a fairly dramatic effect on precision. Maybe not as much at 100 yards, but I'm sure further out it would produce pretty noticeable results.

What does the accurized ar-15 crowd do to avoid this issue? Or is this just the reality with AR-15's that we have to live with? @MSTN

Hey guys, first post and not a very technical question.

I'm a brush hunter and am wanting to setup a light and handy .308 with a 16" barrel for my can. I'll run a lightweight 2-7. This would be 300y max but more like inside 100 realistically.

Major players l've found so far are Tikka t3x, Howa 1500 super lite short, and Ruger American Gen 2. Or starting a build with the Howa barrelled action.

Nice guns are always nicer of course, but would you guys spend more than 600 for a Gen 2 Ruger American?

Brand new in the box Garmin Xero C1 Pro chronograph. Includes the tripod and charging cable.

$500 shipped
PayPal (F&F/Gift) or Venmo only.

I've spent the better part of six months gathering data and putting together a video about why the small things matter. It included two small things I do in my reloading process that have tangible results, and also included data on the nearly 200 rounds worth of testing I did to support. However, it was way too freaking long, so I split it in two. I just published the first part of the video, and augmented it with some additional content. Sorry, the two small things will have to wait for the second "half" to get edited and augmented

Login to view embedded media

Got this email this morn...

They are closing customer service down early to celebrate customer service.... Can't make this shit up

Selling my brand new M40A6 with suppressor and scope

Built by GAP
RR prefix action
Schneider barrel
FA 762 SS suppressor
S&B 3-12 USMC scope

Looking for $25,000

Only trades at this time
Accuracy international ELR 50bmg
Rare KAC stuff
Transferables

Apparently CBS stories must be approved by the “Race & Culture” unit.


I swear the west is falling further & further into the pit of asshatery every day.

Columbus Day - Discover The Savings Sale - Today - Monday October 14th

This sale includes, but is not limited to Arken Scopes and Accessories, Hawke, GPO, Kowa, Sightron Riflescopes, Konus, Element & Peak Design have been heavily reduced throughout the site. If it's not marked down please give us a call, 516-217-1000, so we can take care of you personally.

A few things to keep in mind...

Leica Fall Optics Sale Now Thru October 31st - Save big $$$ on some of Leica's most popular optics:
Leica 10x42 Geovid-R Rangefinder Binocular reduced from $1,499.00 to only $1,199.99
Leica Geovid Pro 10x42 Rangefinder Binocular reduced from $3,399.00 to only $2,719.99
Leica Rangemaster CRF 2400-R reduced from $599.00 to only $399.99
Leica 10x42 Trinovid HD Binocular reduced from $999.00 to only $799.99

We are now an authorized DNT Nightvision, Thermal & Riflescope Dealer. The New DNT Zulus Nightvisions are the direct replacement for the popular Arken. Same great unit but at lower pricing. DNT not only offers the 5-20 Nightvision Scope with, and without, Laser Rangefinder they also offer a ZULUS HD 3-12X Digital Night Vision Scope with Laser Rangefinder and Ballistic Calculator for only $599.99.
We are also excited to announce the addition of the DNT ThermNight Thermal & Night Vision Multispectral Scope with Laser Rangefinder and Ballistic Calculator - PMS - Picatinny 0 MOA Short for only $999.99 and the addition of the The New - The One - DNT 7-35x56 FFP Riflescope only $599.99 available in MRAD and MOA.

Sightron Riflescopes are the only Pacific Rim Riflescope brand we know of that are made exclusively in either the Philippines or Japan. NONE of their scopes are made in China. We have gotten very aggressive during this sale with Sightron Riflescope Pricing. If you're not familiar with Sightron you should be.

Add Burris, GPO & Steiner to cart for special reduced pricing.

Save big on a huge selection of as new Sig Sauer Open Box Optics. All units are complete as new with full warranty.
as well as Pulsar Refurbished Thermal Optics with full Pulsar 1 year warranty. Pulsar is the industry leader in Thermal and this is your chance to save substantially on the Thermal Optic you've been wanting.

Zeiss Binocular Deals While Supplies Last We've got a limited Supply of Zeiss TL 10x25's, Zeiss Conquest HD's & Zeiss Terra ED's at very discounted pricing.
Get the Zeiss Terra ED 8x42 Binocular or Zeiss Terra ED 10x42 Binocular reduced from $499.99 to only $349.99

Swarovski 75th Anniversary is Still Running - Save on Swarovski Z3 and Z5 Series Riflescopes, NL Pure Binoculars, Objective Modules and matching Eyepieces and EL Range with Tracking Assist

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

So I'm trying to come up with a solution for a gun vise for mounting scopes.

I've looked at the usual, but then thought hey, I have a Viper barrel vise, why not use that?

Would there be anything inherently wrong with using the barrel of the rifle to support the gun while mounting the scope?

I dont have a work bench (working on that) so I was looking at either the all in one typw table top vise, or some that i could simply clamp to the table with c clamps.

Unused, no box. 6" blade, S35vn steel.

$500 ftf, $525 shipped CONUS.

ETA: I could use a decent spotting scope in trade.

Brand new never, fired Infinity 9mm

-Specs-
Front Sight None
Caliber 9 x 19
Trigger Style Long Flat
Grip Shape Competition (Flat Backstrap) - Shown in Photo
Magazine Release Left Side Checkered Magazine Release Button
Magwell Steel - Small
Thumbshield None
Frame Checkering None
Thumb Safety Style Ambi Extra Wide Left Side (Right Handed Shooter)California Resident No

6-140mm SVI magazines

Trijicon RMR dual illumination 9 MOA sight

$8500 plus shipping to your ffl
I will trade for high end scopes plus cash

We have the Pixels On Target Voodoo-ML FDE Green Vis / IR with a not widely available QD fixed mount that does not require a Wilcox FTS.

This mount has the optical center sit at 1.5" and has two adjustable tensioners to fit any picatinny rail without tools. Similar to other QDs, this one has dual levers clamping it in place.


Call if you have questions

Preston
214 744 3589

Well I ended up picking up another Gen4 right after grabbing this one so I’m going to let it go. The reason being is the gen4 magazine collet is able to accept a bag stop that I already had and matches my main comp gun so it’s just nice to have it identical.
Other than that it’s has the exact same features, actually more features than the gen 4 and is just as nice.

Inlet was opened up for a trigger hanger as seen in pictures.

Shortbus did an awesome job on this and also comes with extended ARCA rail and 4 external weights

Asking $1300 shipped & insured

I’d entertain a few trades +/- cash
Leupold Mark5s prefer 3.6-18
Nightforce 1-8, 4-32, 4-20
Foundation stocks
Henderson trimmer
Bergers in 223, 6 & 6.5
DTAC 115s
Dillon 1050,1100,750 or 550

Shot a few matches with it, spent most of it's time on a backup prs rig. Will come with the throw lever. No box but I have everything it came with. 1400 ppff.

About the pull the trigger on a Zeus build and someone mentioned the quick change isn’t a great option in PRS because you could bump the barrel and lose your zero vs an impact, lone peak, etc.

Is this true? I really wanted to be able to change from 6 dasher to 6cm for practice and cheap factory ammo.

I’m a casual shooter, once a month local matches.

Torn between this and an impact. I’m considering the impact action due to less bolt lift and from research it appears to feed better with AW mags.

NX8- 2.5-20 F1 Moa
Moar illuminated in perfect condition glass is flawless it’s hardly been used
Comes in NF ultra light rings

$1350 shipped

Jews being chased down the street by other Democrats.

And yet they'll continue to vote Democrat in Nov.

Atlas psr with area 419 barricade stop/arca adapter and hawk hill feet. Asking 250 shipped.

Down sizing my reloading room.

Like new Area 419 Zero Press for sale

$1000 shipped.

Login to view embedded media
No shit as the title says - police help out of state bounty hunters kick in a door and search a house and hold family at gun point .

Every day with a Dead Kennedy is a good day...

Sadly, she did not kak herself in a spectacular way.

Sirhr

Hands on instruction, I guess.

A 14-year-old girl who witnessed the incident told law enforcement Bowers “would not get out of his seat and didn’t tell us to do anything.”

“There was white stuff on his pants and he would not get up for anything. He had his hand down there and was sweating but it was cold in his room,” she explained.

Click to expand...

https://www.thegatewaypundit.com/20...rat-county-chair-arrested-masturbating-front/

For Sale: Foundation Centurion Special Order Stock. This Centurion, vertical grip stock is brand new and special ordered direct from Foundation with the narrow (Exodus model) forend width and cut for Hawkins M5 DBM. Stock is the gorgeous black color and fits and Impact 737 action. A Foundation brand arca rail was installed. Sell stock and arca rail for $Sold

You recently DIY'd your barreled action in a new chassis. How did it go? Did you run into any problems? Smooth? Did you bed the action? What did you learn? Regrets?

I have a barreled ARC CDG (LA 700) and a MPA matrix Pro II chassis inbound. Should I DIY the installation? I am a (very?) competent armorer and craftsman/mechanic in other areas, but draw the line at anything that requires precision milling.

TIA