Cat 2 before she hits the coast. Getting everything ready.

Just curious if something is messed up that I don't know about. I subscribed to become a supporter again so I can use the equipment exchange, but I'm still not showing up as a supporter and I have no access to post. It's been 8 hours or so now.

Zermatt Arms RimX build.

-Harrell's Tuner.
-22" 1:16T Shilen Ratchet barrel spun up by Elemental Industries. (Barrel does have a slight taper towards the muzzle).
-Foundation Stock with forend weights perfectly balanced in current set up.
-Foundation Arca Rail System.
-Single stage Trigger Tech Diamond curve.
-Wiebad cheek cover.
-Tract Toric ELR 4.5-30x56(MRAD).
-Vortex Pro Rings.
-3 RimX Mags(two with extensions from factory and Hoz&Shield).

Parts-
I have a new bolt face and firing pin assembly installed on the rifle. I have the old parts which are pictured below as well as extra parts such as springs and extractors.

Sale-$4,000(W/Scope) $2,800(Rifle Only W/ mags and parts)

Rifle shoots great especially when tuned for that specific lot. Groups below are with Sk Rifle Match @ 50yds. Previous owner stated that Lapua Center X is what this rifle really loves.

Rifle has been used in monthly matches as well as NRLX matches. Barrel does show some scuff marks as well as the foundation stock,

I'm in N. GA and will do Face to Face meets. Also will ship FFL-FFL but trader pays for shipping their own rifle and I will pay for mine. Paypal G&S(buyer pays fees) or Venmo

Hey Shorty-owners (I mean the scope of course),

I´m almost there to order me one, though I can´t find one to handle it.
So I hope you are willing to share your experiences with it.


I´m asking me, how the eye-box is at 10x because of the 24mm objective.
Does it work good for you?

How do you run it when a higher magnification is needed, do you switch to 10x every time, or do you use lower magnifications like 4x as well?
Or in other terms, at which magnifications are the holdovers usable?

How´s the picture at 8x or 10x, still sharp and bright?

And the last one:
Do you run a red dot with it, and if so how did you mount it?


Any answer would help me and make me happy.

Just when you thought the left couldn’t get any more retarded.

Brand new take-off will fit AT, AX, and AT-XC

24” 1:8 threaded 5/8x24 with cap​

$625 shipped

Apparently 20k plus illegals have overwhelmed the town of Springfield Ohio. They are supposedly eating people’s pets among other things if this reporting is true:


Anyone in that area? If so is it true?

BNIB Trigger Tech Diamond w/flat shoe for Remington 700

$old

Atlas CAL bipod Gen 2 (BT65-LW17). Like new. Used twice at the range for a few hours.

This is not the regular version; not the tall.

SOLD

Greetings all. This is a vintage 1997 Gucci. I'm the original owner, got it straight from Gucci, I blame the Beastie Boys and PNC for making me think I needed a Gucci anything. I haven't worn it in 20 years or so.

Needs a battery, I can certainly get one put in so its ticking if you have...

RMR RM05, RMR Type 2, RMRcc, really like dual illumination RMRs of any flavor, Aimpoint micro, or ?

American or quality Euro 308, 6.5 Grendel ammo also relevant.

*Fresh is a reference to the Beastie Boys lyrics from Johnny Ryall. The watch is 27 years old and was $675 back in the dizzy.

It's in Very good condition. I have the box and everything it comes with from the factory. $3400 for the setup but I would like to trade for a Tangent 5-25 gen3xr fine.

I was watching the movie The Natural with Robert Redford tonight and the judge character is Tim Waltzs' double.

Went to get some supplies for load testing and noticed right away the prices on powder and primers has made another big jump. Powder prices were increased by $10-$15 dollars a pound and primers were increased by $30 fricken bucks to $120.00 dollars for a box of a thousand.
I wonder how effective a "boycott" of some type would be.
They're straight up GOUGING the crap out of us.

Look forward to some thoughts, opinions, and ideas.

I consider the following chassis some of the best designs (looks wise only):
MDT JAE-700 G4
MPA Matrix
KRG C-4
KRG Whiskey

There might be other factors that affect one’s opinion on what makes a chassis good or great but I am new to the long range side of firearms and it seems silly to consider a chassis based on just its design but I would still like to know which chassis you guys consider to be the best looking ones.

Selling a G3 Razor mil reticle. Comes with throw lever and caps. No box.

One rub mark on the side, pictured.

Spuhr is cerakoted RAL8000.

$2250 shipped without the Spuhr mount.

$2550 shipped with the Spuhr mount.

Can do a variety of payment methods, if there's a fee for using it, it's on the buyer to cover the fee.

Greetings all. Happy dance, I think I have my sons AR-10's figured out - they are kicking out brass at 3 o'clock and shooting straight.

With that said, on the optics front we have a 3 bears issue - one is wearing a 1-6 Razor, the other a 4-16 ATACR, and they seem to agree too little, too much respectively.

I believe "just right" is the Trijicon AccuPoint® 2.5-12.5x42 Riflescope


Maybe I'm a bad father, but I'm an MOA guy and so we're sticking with MOA for the purposes of this. I'm too dumb to divide by 10.

So with that said - am I missing anything that would be a better value for the ~ $1000 range for a 2-12 (ish) scope?

This is for a 16" 308, so as a practical matter we're a 600-800 yard gun due to home range and ballistic reality limitations.

Requirements - illumination, holdovers built into reticle, parallax adjustment, $1000 ish ceiling, real warranty, hold up to AR-10, and I feel like the Trijicon is already on the porky and long side at about 14" and 22.4 oz.

Am I missing any better options?

What did Sitka do to piss off Euro optic? Seems like a bold move on Euro optic’s part.

Selling an unused Bartlein .308 Win barrel for Terminus Zeus short action. It’s a m24 profile with 1:10 twist and 24 inch’s long. 5/8 -24 threaded for muzzle devices. Work was done by Paradigm Gunworx. I can take PayPal FF or Venmo. Asking SOLD shipped.

​

Nxs 3.5-15x50 F1 MLR
Non illuminated
Zero Stop
Glass is good
Aadmount Caps

Yes it is First focal plane.

NF box is unmarked.
$1850 shipped

Hi guys,

I have two Vortex Strike Eagles for sale.

1. 3-18x44 EBR-7c MRAD reticle. New in box. $525 shipped

SOLD 2. 5-25x56 EBR-7c MRAD reticle. This one has been used for NRL22 for the last two seasons. Has some salt on the turrets. Comes with everything in original box. Bikini caps, sun shade, cloth, and turret tool, throw lever, lone star bubble level. Awesome scope for rimfire. $425 shipped

Buy both $875 shipped
PayPal FF or Venmo

Thanks

Brand new, all 3 for $1325 shipped.

Hi everyone, i already posted a similar thread on another forum (more hunting oriented). I know you guys are more knowledgeable about precision shooting so i will ask here for more insight.

I recently bought several sets of rings from a reputable brand, very appreciated on forums. They look good quality. They have an integral level in the base. I opted for that model based on reputation and onnthe fact that the level, placed in the base of the front ring on the left, looked like a good compromise for a 450 yards max hunting rifle (take note that i will shoot up to 800-1200 meters at the range with this same gun but the main use of the rifle is to hunt roes, boars and fallow deer). This way i am able to check the level when rarely needed but at the same time the level doesn't stick out too much, keeping the rifle convenient to carry.

I made a test and found out that ALL the 4 rings i have, bought in a 1 year timespawn, have the level.. out of level! It's just a matter of half a degree and i know that, as long as the reticle is plumb to the bubble level, the level being off (and thus the rifle being canted) 0.5 degrees is no big deal, especially for the distances i am shooting at. That said, every one of the level is canted in the same exact direction and everyone is off by 0.5 degrees (this value was tested with reliable equipment and was the same also on my colt le6921 rail). I checked with rings mounted and torqued on a high quality integral scope base (defiance) and using multiple levels i know to be on spot as a reference). Also when leaning on a flat surface and not clamped to the rail, the rings showed the same exact cant.
The fact that all the ring levels are off by the same exact amount in the same directions tells me that the manufacturing of these rings is very consistent.. consistently wrong though!

How is this possible? For at least 1 year a reputable brand (i will not say the name of the brand because they have been great in assisting me and accorded a full refund) produced defective rings?

Thanks guys!
greetings from Italy

Vudoo v22 360 with 18” threaded barrel
40 moa rail
1 aluminum 10 round mag
1 poly 10 round mag
I have a trigger tech diamond I can include for $220 and the foundation mg2 I had it in with Hawkins bottom metal and weights for $1100
Barreled action and both mags $1550 shipped FFL to ffl
No trades
I can only accept Zelle cash app usps mo or cert check nothing else