Vudoo V22 G2 with MTU profile Bartlein 20” threaded barrel 1/2x28. Round count is less than 2000. Comes with (3) 10 round magazines (1) has 2 round extention) and a bore guide for cleaning. 40 MOA scope base. Color is black. Barrel is 1.20” to .870” straight taper. Timney impact trigger. Will ship in original box FFL to FFL. Barreled action only – pictured in stock with scope just for reference. $ shipped to your FFL.

for what they, are really wanting & saying.

Have some trigger tech traditional curve single stage triggers all have 200 to 300 rounds on them I just went to the 2stage trigger these don’t have the bolt release and these r for the 700 rem or clone actions $235 shipped

I put this rifle together to get into long range shooting a few years ago and it shoots very well. Estimated round count is 850-1000.

Rem 700 AAC-SD .308, 1:10 twist, 20 inch barrel, factory threaded for brake/can. Had it in a McCrees Precision chassis for a while but when I got into 6.5 CM I converted this rifle to a handy woods gun for deer, etc. would make a great truck/ranch rifle. Or rebarrel with a ultralight barrel for a sweet mountain rifle or to get a young hunter/shooter started! With the PROOF carbon fiber Mountain Hunter stock, It weighs right at 10lb with a steel, Nomad-30 suppressor(not included) and stock pack(included) with ammo(not included), a bit under 9 lbs without can/pack. I can get closer weight if needed. Can't find the factory muzzle, thread protector at the moment so I can include a three prong flash hider and mail the thread protector later if it turns up. Stock has adjustable aluminum pillars and needs some tweaking as certain rounds do not feed consistently. I have been meaning to adjust it but have been on a bow hunting and single shot kick lately and hadn't gotten around to it.

Moving this rifle to fund another project. Not looking to part it out at this point. Thanks for looking!



What I paid:

Rem 700 AAC-SD .308
$692

PROOF light weight mountain hunter stock
$850

Vortex viper pst 4-16x50
$750

Seekins 20 moa rail
$109

Seekins low rings
$139

Jewell trigger
$215

Triad tactical stock pack
$50

Professional-amateur, flat, Krylon, rattlecan paint-job... Priceless


Grand total of around $2800 if you were to build it today at retail, not including what I spent on shipping and tax for components.



Your price for complete package shipped to your FFL: $2000

Stuff For Sale:

Spring cleaning early this year. All prices include shipping to the lower 48 states. (Happy to ship to Alaska/Hawaii but you pay actual shipping cost.) You are responsible for knowing your laws and staying within them, don't purchase if not legal to ship to or own in your area. More photos available on request.

PPal FF, Venmo, Zelle, personal check or USPS MO fine but must clear before shipping.

Thanks for shopping!



Hogue Over-molded stock for Rem 700 SA $75 Came From factory on Rem 700 AAC-SD. I filed down the cross members in barrel channel of forearm slightly to reduce barrel contact. Very lightweight and only lightly used. Would make a good hunting stock.



Blackhawk AR15 buttstock new in package. $25






Vortex Sparc Red Dot, old version, used a couple times works great. $75



Postol holster, universal, molle. I think it works with m9 beretta, 1911, possibly glock. Didn't fit sig p226 well, a bit tight. Would be great to keep a backup in one place in a pack or vehicle. $25

Great condition, had it on a 1911 for a short period of time and then sold the pistol, and I use the A models on all my Glocks. I do not have the box for this one, includes the light and batteries - Functions perfectly and glass is great.
$200 shipped

SPF

Streamlining the collection so this has to go. Lightly used MR556 with Geissele trigger, HK quad rail, Troy sights of the correct height, and HK slim line stock. Includes soft case and papers. I took off the muzzle device but it will ship with a thread protector.

$2600 Shipped. For sale only where legal in an unmodified state. Insurance would be extra. NO TRADES but open to reasonable offers.

I can take cash or check (will clear before shipping.) If you are a Virginia resident and can meet at a Northern Virginia FFL to do the transfer (your expense) I will knock $100 off.

Cross-posted so first timestamped "I'll take it" wins.

Rifle sold
love this rifle, but I’ve had it more more than a year and barely used it. And I need to gather some cash to build my house this spring.

Black Mrad folder, current model. Less than 150 rounds on the rifle.
Im listing the rifle with NO caliber conversion kit. ( ie, no barrel, mag or bolt face) for $3750.00
I have 300 Norma and 6.5 barrel conversion kits available for $900.00 ea. both have less than 100 rounds.
rifle is in excellent shape and performs flawlessly.

bipod and scope not included, bipod may be available to rifle buyer.

possble trade for thermal or NV

Like new. Glass is flawless.
Asking 2650 shipped CONUS
please don’t message here if interested. Just pm me.

NIB, Diamond RH Flat shoe, no bolt release, Rem 700.

$275 shipped

First I’ll take it via PM…no trades!

Don’t have time to shoot them, and tax man wants more money, so I’d rather sell these than dip into savings.

LMT MWS MARS-H 16 inch CL barrel 308 - I’ve fired 20 rounds through it to zero the Eotech 1-8. Rifle comes as pictured with the magpul grips and stock, BRT EZ tune 50/50 gas tube, factory lmt two stage trigger, box etc. Eotech scope not included, and the factory flash hider will be reinstalled unless you want to pay for the Surefire.
$3000 Shipped minus optics and Surefire, both available separately after the rifle sells.

LMT MWS MARS-H 20 inch stainless barrel 308 with 15 inch rail - This rifle is unfired and as new. Rifle comes as pictured with the magpul PRS and grip, BRT EZ tune 50/50 gas tube, Geissele SSAE two stage trigger, and I do not have the box. Eotech scope not included, and the factory flash hider will be reinstalled unless you want to pay for the Surefire.
$3600 Shipped minus optics and Surefire, both available separately after the rifle sells.

So my employer is enforcing PPE and one item is ear pro .
I'm currently using walkers razor's but I'm missing phone calls . As an added bonus I'm pissin my boss of as well .
So I started looking at the Walker's Ultimate Quad Connect . Everything expected and Bluetooth plus better NR .
They claim a integrated mic for calls .
Then there is 3M's version , 3M Pro Comms . They have a boom mic and Bluetooth .
Not sure which to get and trying to stay in the buck fitty range . Any suggestions ?

Great condition Vortex Razor Gen2 scope no scratches I’ve got it on my 6 Comet and has mainly been used for shooting steel at my place haven’t ever shot a match with it.
Rings and level not included. Have original box and paperwork 1600.00 PayPal, Venmo.

WTS - Like New, never used - Manners PRS TCS - RH - Rem 700 SA

- Double Dead TCS Shell
- PRS-TCS DBM Mini Chassis w/ 5 round .308 Accurate Mag
- Elite Tac Back in Black
- 1.35" barrel channel
- PRS-TCS full arca rail with full internal weight kit
- PRS-TCS flush cups right and left rear
- Sikes clutch rail on the right and left side.
- Additional rear weights.
- Gray Ops arca mag blocker
- Wiebad cheek pad

$old shipped to lower 48 states

SPF

Selling this TL3.
Picked this up planning a build, but ended up trading a buddy for an AI so no need for this. Body has ceracoat tan, bolt is factory black.
No trigger or accessories included
$1075.00 shipped

Only trades would be thermal optics or NV clip on.

"The country is hoping to encourage greater civilian interest in national defence amid increased threats ... "

Click to expand...

Does anyone know of anyplace that can make a new collet for the Lee collet neck sizing die. I'm sure it would be easy enough for someone with the machine tools to do it, I don't really have anything local so I'm asking here. I'm sure I'm not the only one (maybe I am!) that hates the new style collet Lee uses that doesn't size the whole neck. It leaves the case mouth unsized and even after the bullet is seated it is still flared on the very end. I don't "neck size" but use it sometimes when it's needed, like when you don't get a complete fire form, or to fix a neck when needed. Many uses for the reloader besides strictly neck sizeing alone. I try to have one for every chamberfing I load for. Thanks for any help!

I'm out of the 223 game.

300 rounds of 90grain SMK (custom loads from a place out in MT; I bought them from someone else)
200 199 rounds of 77grain Nosler Custom Comp (in the clear bag; I pulled one apart to weigh the bullet, the piece of primed brass will be in there)
100 rounds of 77grain HPBT - Norma brand

$500 shipped.

Will split into 2 groups....

77gr.... 300 rounds. $265 tyd
90gr.... 300 rounds. $265 tyd

I just got this account set up. Let’s argue about anything… try me

Post this shit in a tech forum again and you won't be here long. --The Management

Can’t make up my mind and figured I’d ask here.

Years ago I switched my 6.5CM, 6 Dasher, and 22BR from H4350 to RL16, and now I’m also running a 22GT with RL16. When I first tested RL16 vs H4350 I found faster velocities, temp sensitivity was better, groups were as good or better than H4350… but it wasn’t a free lunch as RL16 is dirtier than H4350 and required more frequent cleaning.

I’m getting a bit low on RL16 and it’s time to restock since several dealers have 8# jugs and there are some free shipping and hazmat deals today. However, in the last 9 months Alliant pricing has gone insane and an 8# jug of RL16 is now $100ish more than a jug of H4350.

If you were restocking today, would you pay the rather hefty price premium to stick with RL16 which you already have loads worked up for and you know works, or would you save some money and give up a little bit of performance and switch back to H4350 and redevelop all your current RL16 loads? I know H4350 will work very well in every load I currently use RL16 in as well as require less cleaning, I’ll just lose a bit of velocity and pick up some additional temp sensitivity.

For the same price as 40# of RL16 I can buy 48# H4350, that’s not insignificant…

Thoughts?

Still sealed in plastic 8-9 500 round bricks. I'll check tonight and put some pictures up. Would like to sale to one to save on shipping $230 per brick shipped if one buyer for all I'll make a better deal this is um1 it is faster than um1b but is still the dimpled case shoots great.

Needing a lawyer for civil matter (no, not divorce) with core Conservative (non-woke ,non-liberal values).How is this type of person found?

Login to view embedded media The shooter was a convicted felon and had no legal right to posses firearms. Also media would not disclose name or race of shooter because it wasn’t a white guy. Sad situation.

Hello, here is what the bore looks like after non-abrasive cleaning or brush use. It is a 6mm BR with moderate loads and a custom, hand-lapped stainless steel barrel .900" at the muzzle and 26" long. I broke the barrel in with the 1 shot, clean, 2 shot, clean, etc. and clean it with Wipe Out or Boretech eliminator every 30-35 rounds. The first picture is just where the lands start (no carbon ring noted), the 2nd is about 13-14" mark and the last about the 20" mark. I'm assuming this is carbon fouling. If it is, I may try CLR as the other two failed. Thanks,

Hi, I'm Marlin Perkins. This week on Mutual of Omaha's Wild Kingdom...

(for those playing home game, Eritrea is on the east coast of Africa, facing the Red Sea.)


They do not care where they war, be it here, in Germany, or back home. However, they should have some fans here because they also have no use for police.