I have a MPA and a MDT chassis and neither are the same size arca as my spotting scope. Purchased a Vortex quick release plate hoping it was the same size, no luck.
I have a Fatboy tripod with an invert 60 head , I'm looking for a plate that can be connected without adjusting the clamp size?

Looking for Terminus Zeus QC barrels carbon or hunting weight steel barrels.
6.5x47
260 AI
6.5 CM
7 SAW

2x Used TT Diamond flat shoe triggers - $SOLD shipped

1x New TT Diamond flat shoe trigger - $SOLD shipped

Received this back in April of '23, so it's the initial version. Also have the replacement extractor that ARC sent out not too long after release, as well as an action wrench. Both are brand new. $old shipped to your FFL. Not looking for any trades at this time. Thanks.

Action details from my invoice:
Coup De Grâce Bolt Action (Short action, Right, 0.473", Hourglass, 20 MOA [5.8 mrad], Black, Fluted, Pivoting)

FYI, I'll also be posting separate ads for a new PVA CDG prefit in 6br, as well as a lightly used Xylo chassis.

Howdy Hide,

I'm fighting through a bit of 90's nostalgia this week but thought that perhaps one of the outlets I'd been using to 'scratch that itch" may be of interest here.

Long story short- in the late 90's there was a show called "Magic Secrets Revealed" which featured the "masked magician". Essentially the premise of the show (you have to remember that this predated "reality tv" programming) was the producers of the show convinced a magician to "reveal trade secrets" but ONLY under the guise of remaining anonymous due to "fear" of being blacklisted.

That said- it's just a show that has the potential of ruining your childlike wanderlust and love of magic by showing how the tricks/illusions are performed but I don't recall a show of similar content existing before or since then.

Do with the below link as you will- either you're interested in "cracking" the secrets or you'd rather remain in ignorant bliss (and no judgement from me either way) but figured I"d at least share the link in case anyone else had an interest in this topic.

The barrel is to narrow to the handguard, so that I can´t attach any M-LOK equipment to the rifle.
The M-LOK - nut touches the barrel on the inside of the handguard.

It is an upper from Savage, the MSR15 Recon 2.0 with an 18" barrel.
But even Savage emailed me and said, they don´t know which hand guard this is.

Can you help me?

HI friend
selling my brand new scope everything inside the box and scope mount.
SCOPE $1300
SCOPE Amount $200
Accept payment:
Venmo,zelle,paypal
any question 310-357-6026
thanks
Trade plus cash
Aimpoint T-2
Daniel defense Riii handguard 12.5 any color
LMT AR-15 lower receiver full ambi strip. any color

What’s a good deal on a used AMP MKII which is not the newest DB model? Not in the market yet but just trying to see if it’s something I should consider or not. Couple sold in PX but the pricing was removed from the listing.

Line item veto.

The Donald is happy, Elon is happy, I'd be very happy.

Carry on.

Hello folks,

Selling my PRS build 6.5 Creedmoor rifle. Foundation stock, Proof barrel, Impact 737R action, Leupold MK5 Optic (Mils).

$5,500 - Only local (San Francisco Bay Area / NorCal region) buyers at the moment.

789 round count. I don't plan on adding any more. Used primarily at local matches (shoutout to NCPPRC and WCLR) - just haven't used it as much as my rimfire build so here we are.

Build sheet is in the photos.

Not parting out. No trades.

Thanks!

As new Titanium Blue ACC Elite rifle chassis with buttstock dampeners. Includes 2 Grayops external forend weights.

Asking $1400 shipped

Mac mp5 clone. Shoots really smooth. Fun carbine, ran maybe 300 rounds though it suppressed. Currently short barreled rifle but will pull off the NFA and will convert back to a pistol upon sale

will include the plastic briefcase, mloc handguard, optic mount 2 mags, pistol end plate, FH.

800 shipped to your ffl

Optic not included.

Will sell the hk parts mp5 folder for 225 shipped.

<added to say that I apologize in advance for this likely coming across as a George Carlin type of 'bit, it wasn't my original intention>

I want to talk about "problems" or at least the concept of "problems".

I've got my own "problems" (and I do), you've got your "problems" (and you do), our neighborhoods/county's/ states/ federal government have "problems" (and they do).

There's all kinds of "problems" out there in the world- in no particular order, there's financial/emotional/governmental/mental/sexual/work/familial/etc type of "problems". We've made great big strides in identifying all the sorts of "problems" we all exist amongst over the years. I really doubt that anything in that particular comment is all that controversial or something worth squabbling about. I'd even 'double down' and say that over the past few decades we've become a nation that's hyper aware of our "problems".

But, and this is a 'Sir Mix-a-Lot' emphasis on butts level, I'd humbly suggest that we've become a nation that has chosen (or was engineered) to accept these "problems". We not only accept them as being "problems" but we have entire groups that use these as their personal identities. And we stand in a circle holding our proverbial dicks in our hands because we're only talking about "problems" and somewhere down the line seemed to gave up on talking about solutions and continue to make our "problems" an identity/ a protected "class" (and honestly there's more 'value' in aligning with that mentality than has ever been in existence before in our country). Everybody is "special" & everyone has "problems" but over the past 20 years we stopped asking "why" and instead categorized everyone into these social buckets and accepted that as our reality.


Stepping off of my soap box- I just want to leave you with this... I'd argue we need to collectively reevaluate our perceptions (and be open to our reality being a social construct designed by 'somebody' else). Why is it contrary to point out problems while using them as an identity? Why are independent thoughts questioning this societal construct silenced and why does the conversation never switch to how the perceived "problems" could ultimately be addressed?

It's fucking wild right? We're all experiencing problems, likely the same type of problems, being 'adminstered' by elected official with far greater "problems" than we have in our inner circles (and I'd also argue that exists by design because it makes "us" feel "better" because while our personal life may be a daily battle , at least our perceived household is still "better off" than our elected officials/ local/state/federal government.

And we beat our chest saying that everything is fucked, meanwhile everything in our lives (family & career) is fucked but "we" seem to feel better because by everything else being fucked it gives us some sort of weird Stockholm Syndrome.

-LD

Have a new Gen III Razor 6-36x56 in mil. Open box, has been fondled a little bit. Never been mounted. Comes with everything it came with.

$2325 to me shipped to you.

Wilson Combat 16” 6.5cm AR10 complete factory rifle. Brand new unfired.
Comes with factory Wilson Combat case and paperwork.

$2000 shipped to your FFL

PayPal FF, Venmo, Zelle or Apple Pay. Can accept a certified check or money order as well.

Kind of saw this coming.

Login to view embedded media

Selling my spuhr QD mounts
QDP-4602(SOLD)
QDP-6002 36mm 1.5 height
Both mounts in excellent shape
$350 each shipped diving board not included

Login to view embedded media
Not sure what's up with strawberries, but I remember them having more flavor and being red, not white, inside 40 years ago.

How much of the food people eat today isn't really food?

So I posted on here last week asking about differences between a 6 and 25 creed, and decided to go 6. But the more I thought about it, the amount of 6mm cartridges out there is quite large. I want something for plinking and whitetail inside 350 yards. I would like the easy button for it when it comes to reloading, and decent speed. I have a 6br and 30br, both are very heavy but probably the easiest thing I've ever reloaded for. I was thinking maybe a 6x47 lapua, 6xc? or stick with he 6 creed, any other suggestions? I have a ton of cci450s that id like to use up on this as well.

thanks fellas

I have an amp mark 2. $1100
Will be just the amp no pilots

I have a rcbs chargemaster that has been in my closet for a couple years, it dont work or turn on, dont know what the problem is, if somebody wants it for parts or to attempt to repair it. I'll send it to you if you cover shipping. If not, the next step is the trash.

Hey all,
Selling a few scopes to clear some funds for house projects. Below are three scopes that are in great condition.
New in box LRP S3 6-36 Mrad $1600-----SOLD
Steiner T5XI 3-15 SCR Mil with JP mount $900-----SOLD
Trijicon credo 1-8 MOA Red/ Green W mount $800--------SOLD

Let me know if you have any questions. NOT LOOKING FOR TRADES ONLY CASH.

Login to view embedded media
I can sorta tell that she’s watched Carl Zha’s podcast, based on the examples that she used…

Login to view embedded media


But did she watch this cartoon and use it as an example?

That would be amusing

So I stopped at Montgomeryville Cycle Center in Pa. after work for some tire spoons . Ask for some tire tubes and rim strips . So while waiting for my haul I wander into the clothing and helmet area . Just lookin not really needing to get anything . Guy asks me " can I help you " . Light bulb goes off and I answer , " whadda ya got in the way of Modular ADV Helmets "? We look around and bingo . I find a helmet on a display , try it on and wow , nice . Ask how much and $797 . Sorry fuck no !!! How bout fitty percent off . Hmm , how much Dat ? $400 sumptin after tax . I tell him that mama san will kick my ass for 4 sumpthin. He asks what I can get by with . I said $350 . He says how bout $357 after tax .
Fugg yeah . $800 dollar helmet for $357 OTD .
Fuggin Schubert E2.