Did you see this one?
https://abcnews.go.com/US/louisiana...fake-visa-scheme-targeting/story?id=123804582

Login to view embedded media

Baron23 said:

Put ‘em up on Hide TV….maybe?

Click to expand...

Not a bad idea. I'll ask Frank about what that would entail.

BTT

BobinNC said:

What I also found interesting was the POI change that was evident with the brake vs no brake.

Thanks for sharing

Click to expand...

I expected that. The surprising part was how little the shift was. Depending on the rifle/brake/cartridge combination, the shift can be several times worse than the OP’s.


OP, just shoot it. Dont waste your time on paper at 100.

8 out of 10 for any 5.56 at that distance is solid for sure.

I shoot mine quite a bit at 636 yards, which is the longest shot I can easily get on my property. This is about a 6.5" square on a 2/3 silhouette, using 5.56mm LMT with 16" Bartlein barrel from Craddock Precision. That low left shot was an overcorrection on my part, shooting was done with a Vortex 1-10 razor, more magnification would be great for days like that, but much of my shooting is closer

Im2bent said:

View attachment 8743797

Click to expand...

Makes me think of Kansas. Kansas is sending assessors around to assess the property values based on what they assume the value is and the county, cities are taxing the property owners based on that newly assessed value. As a result they are taxing people out of their homes. You can contest it, but do you really think the city isn't going to side with the tax assessor? A older gentleman shot the tax assessor and was later killed by swat for protecting his property against state sponsored theft by force.

Thinking 15.1” NSW RECCE build in 6ARC with this 2-10 Leupold and a piggyback ACRO might be the hotness for DMR matches.

btt

I usually do skirt steak fajita style with onions peppers ‍ cilantro a small amount of Dale's marinade (Walmart, kroger etc ) it's soy based and flavored.

I mix some lime with the Dale's maybe cut it with water if marinading for a long time.

I start prepping vegetables and all the spare cilantro stems, some garlic lime rind mild pepper scraps ect. go in the bag (vacuumed is nice) and in the fridge. I keep serrano, jalapeno and other hot peppers on the side not in the marinade.

I'm also content eating them cooked like a normal ribeye (if I have too). Lol

I think a lot of our skirt steak is exported to Japan since they get around laws by claiming it's "organ meat".

As soon as I get elected Governor of Texas I will make it illegal to export skirt steak beyond the state line.

Shooter McGavin said:

Got to be honest here. Let them do Haiti the way Haitians do and just not get involved. It will works itself out that way. If anyone get involved it never works out.

Click to expand...

Haiti should be ignored and be let self immolate. til you deal with Haitians you have no idea what sub human means.

btt

btt

btt

BurtG said:

One more time what AGBs fit a .75” barrel and won’t hit handguard ?

Click to expand...

It's a superlative arms set screw AGB

Is there another source for a M40 repro stock?

I finally received my stock from the beever guy after USPS basically lost it for a week and this thing is a total piece of shit and not even close to being inletted correctly. The bottom metal inlet is about 1/8” or less too shallow at the front which would be fairly easy to correct and the inletting in the barrel channel is horrendous which can also be corrected, but the action inlet is about 1/4” too high which dropping it down would mess up everything else and the entire top side of the stock would have to be reworked and it would all end up way off and not right. So it’s not even fixable even if I wanted to fully reinlet the stock.

I’d like to do an M40 inspired rifle with this barreled action but after going through the delays with USPS and then finally receiving a turd I don’t think I want to take a second chance with one from this seller.

Been past this for quite a while.

theLBC said:

Click to expand...

Flynn and the other individuals targeted by these scumbags needs to go after them in civil proceedings and bankrupt them.

Cross listed on three/four other forums.

Please be aware as of 08/08/25 it is Now listed on GB Auction, and buy it now. Which will effect a possible sale on these forums now. I would have thought this would have sold on one of the forums I use by now, but clearly it's not the case, so on GunBroker it goes.

GreenGO Juan said:

View attachment 8743569

Click to expand...

Many moons ago in my hometown a Snap-on truck was involved in a pretty heavy wreck, tools slung all over. The scene looked like Los Angeles during looting. Upstanding citizens in the truck along with those scrounging what had gotten ejected from the vehicle. A sight to behold.

Keith

This is a 1/3 size IPSC target placed at 800 yards. 8 out of 10 shots on target with my first 18" LMT SS SPR barrel using factory Norma 223 with 77gr (I assume SMK?).

Four of the hits impacted in two spots on top of each other. My finger is on one in the top picture.


The rifle on top has a custom built Mk12 clone (not exact spec) upper put together by Ross Precision using a Bartlein SPR profile 4-groove SS barrel, with CLE chamber. Just going through the steps of breaking in the barrel, and zeroing the scope.

The upper receiver below that is the LMT MRP with 18" barrel that I used on the steel target above. I've used it at numerous team matches, including three Competition Dynamics Team Safari matches, where we placed second and forth the first two years shooting that match. I need to retire the barrel as I said previously it's starting to open up when it gets hot.

I prefer using a SB 4-16x42 with Gen 2 Mil Dot on my precision ARs. I feel it's the perfect scope fore that role. However, I do have a SB 3-20 on a CLE custom built upper that I have a Raptor LRF mounted above, which I typically use at another team event.

I shoot off a container in the Winter because I can get above the snow, and it's easy shoveling the snow off of that vs. clearing an area on the ground to shoot from.