Latest activity
Maggie’s Funny & awesome pics, vids and memes thread (work safe, no nudity)
- By Darryle
- The Bear Pit
- 107839 Replies
The future of all women's sports?
Their mom and dad are so proud
Here's an idea....give them their own league
How about we take them out behind the pool hall and hit 'em in the giblets with a pool cue until they decide to quit cheating women out of their place in sports, a different kind of Roy Munson if you will
The AR15 Picture Thread
- By MrSmith
- Semi-Automatic Rifles
- 2650 Replies
Took a little longer than anticipated but all of my projects do.
www.snipershide.com
250 gr Scenar @ 1060fps. 9.1 gr VV N110. Quiet with suppressor as expected. Feeds well. Ready to stretch it out for groups.
Thank you,
MrSmith
Gunsmithing - Plugging an AR gas port
I have a subsonic wildcat AR I'm putting together. I set it up with a carbine gas port. I want to change it to a pistol length port to increase port pressure. Is there a way to plug the carbine port and just redrill? Thread, epoxy in a screw/bolt? I currently only have about 6K psi...
www.snipershide.com
250 gr Scenar @ 1060fps. 9.1 gr VV N110. Quiet with suppressor as expected. Feeds well. Ready to stretch it out for groups.
Thank you,
MrSmith
Maggie’s Funny & awesome pics, vids and memes thread (work safe, no nudity)
- By Darryle
- The Bear Pit
- 107839 Replies
Serious question, would you try a spam and pineapple pizza?
No pineapple for me, but this one looks interesting
Reloading Equipment H4350 Sealed 8lb jugs $375 (2 for $725)near 61341 Illinois
- By Stavey
- Buy - Sell - Trade
- 0 Replies
Bought these last year. They’ve been stored in a climate controlled reloading room.
4 New Sealed 8lb jugs
$375 per jug
2 for $725
Thanks for looking
Cross listed
4 New Sealed 8lb jugs
$375 per jug
2 for $725
Thanks for looking
Cross listed
SOLD American Rifle Company XYLO chassis w/ full weight kit $900 shipped
- By Shootnjunky
- Buy - Sell - Trade
- 8 Replies
Attachments
Tony Ben and his work on my M1A...
- By SuburbanHick
- Semi-Automatic Rifles
- 4 Replies
I feel like good work and good gunsmithing doesn't get enough attention... its a bit of a read....
Bottom line up front, get a hold of https://tonybenm14.com/ if you need work on your M1A!!!!!!!!!!!!!!!
I would like to give a shout out to Tony Ben... Not only for his You tube channel but also his shop he just opened.
Years ago I started watching his channel. Part by part I ordered everything for a M1A. Started with a LRB M21 receiver. Lothar Walther barrel (Krieger was out of stock)... War Fighter gas system. NM trigger... etc.... I wanted the m21 stock from Springfield, but they were discontinued before I could order one. Then I wanted a J Allen.... no where to be found. I settled on a archangel stock.. put it in the mill, opened it up to fit the rear lug of the LRB arms.. Bedded it with devcon.... and it just wouldn't shoot accurately (3-4 inch groups no matter what I fed it).
I end up getting frustrated and let it sit a round for about a month and then I saw he opened up his shop. I called and picked his brain... I decided to order a McMillan and when it came in I would send it to him... A deployment later and the stock is at the house, I box it up and send it to him.
I asked him to bed the rifle and look it over to make sure I didn't mess anything up. After all this was the first chamber I have ever cut with a pul through. Sometime later he gets to it, step by step he's telling me what he finds, gets the bedding done. Test fires it and it shot well under 1 Inch at 100 yards .... He boxed it up and sent it home to me.
Yesterday I took it to the range to do load development on it... Everything was under 1 inch at 100 yards. The best group with 175 grain SMK was just over 0.6 inches at 100...
I cannot give enough compliments to him. A true professional and craftsman. I know I can be a bit particular, and some times tough to deal with. I am extremely inquisitive. He was beyond patient and professional.
10/10 would recommend to anyone wanting bolt gun accuracy out of a M1A.
(And yes I know I can go one step lower on rings, they are on the way)
Bottom line up front, get a hold of https://tonybenm14.com/ if you need work on your M1A!!!!!!!!!!!!!!!
I would like to give a shout out to Tony Ben... Not only for his You tube channel but also his shop he just opened.
Years ago I started watching his channel. Part by part I ordered everything for a M1A. Started with a LRB M21 receiver. Lothar Walther barrel (Krieger was out of stock)... War Fighter gas system. NM trigger... etc.... I wanted the m21 stock from Springfield, but they were discontinued before I could order one. Then I wanted a J Allen.... no where to be found. I settled on a archangel stock.. put it in the mill, opened it up to fit the rear lug of the LRB arms.. Bedded it with devcon.... and it just wouldn't shoot accurately (3-4 inch groups no matter what I fed it).
I end up getting frustrated and let it sit a round for about a month and then I saw he opened up his shop. I called and picked his brain... I decided to order a McMillan and when it came in I would send it to him... A deployment later and the stock is at the house, I box it up and send it to him.
I asked him to bed the rifle and look it over to make sure I didn't mess anything up. After all this was the first chamber I have ever cut with a pul through. Sometime later he gets to it, step by step he's telling me what he finds, gets the bedding done. Test fires it and it shot well under 1 Inch at 100 yards .... He boxed it up and sent it home to me.
Yesterday I took it to the range to do load development on it... Everything was under 1 inch at 100 yards. The best group with 175 grain SMK was just over 0.6 inches at 100...
I cannot give enough compliments to him. A true professional and craftsman. I know I can be a bit particular, and some times tough to deal with. I am extremely inquisitive. He was beyond patient and professional.
10/10 would recommend to anyone wanting bolt gun accuracy out of a M1A.
(And yes I know I can go one step lower on rings, they are on the way)
