Action is 0099, one of the first 100 made. Been awesome. I've run custom barrels and prefits on it. Always perfect.

I updated the bolt knob to titanium... got me an ounce on a NRL hunter build

comes with TT special. Or I can pull it off and drop the price.

As is package: $1155 shipped
No trigger: $1045 shipped

Add an action wrench for $70. DLC coated action wrench from Terminus. Won't sell the wrench separately without action.

Add a Proof competition contour BR Barrel with about 2000 rds on it for $125. Still shooting awesome... in fact group size hasn't changed since about 125 rds in.

I would like to share my custom 22 Creedmoor build: "One Does Not Simply Buy One Bolt Action Rifle Over A Lifetime"

• Action: Impact Precision 737R Receiver
• Chassis: Kinetic Research Group (KRG) Bravo Chassis in Sako Green
• Trigger: TriggerTech Rem 700 RH Diamond Flat Clean in Black/Red
• Barrel: Preferred Barrels Pre-fit, 26" Stainless Steel Polished, 1-7.5" 5R twist
• Barrel Contour: MTU
• Threading: 5/8"x24
• Barrel Treatment: Hand Lapped
• Muzzle Brake: Next GEN ECTuner
• Scope Mount: Area 419 Cantilevered Tactical One-Piece
• Scope: ARKEN EP-5 7-35X56 Gen 2 FFP Illuminated VPR with Zero Stop and 34mm Tube

This setup combines precision and reliability, drawing from recommendations and experiences shared by the Sniper's Hide community. For instance, the KRG Bravo Chassis is praised for its ergonomic design and modularity, offering conventional target/varmint ergonomics at a reasonable price.

kineticresearchgroup.com

Just wanted to hear your thoughts or answer any questions about this build.

*SOLD!*

This is an amazing condition FNH SPR A5M XP rifle:

-Accurized M70-pattern action (uses pre-MOA trigger)
-McMillan A5 Adjustable stock
-20” .308WIN 1:10 twist, straight-fluted, heavy barrel with chrome-lined bore (factory guaranteed to shoot 1/2MOA for 10,000 rounds)
-threaded 5/8-24 w/ thread protector
-FN TBM bottom metal
-Seven *very* hard to find 10rnd magazines
-Three 5rnd magazines
-Factory manual
-Factory test target (3-shot, 0.52” group at 100y with FGMM 168gr)
-Logbook going back to factory test shots

This rifle is absolutely amazing and no longer in production. The logbook shows 403 shots fired, and I put another 40 through it that I failed to log a few years ago, for a total of 443 rounds fired. It’s accurate, smooth, and ready to shoot! It does have one area where some of the texturing on the forearm was worn off by a prior owner (pictured), but aside from that it’s in phenomenal condition and would make an excellent addition to your safe.

*NO, I will not sell the mags separate unless the buyer of the rifle does not want them!*

I’m asking $2550 $2500 $2400 $2300 $2250 shipped and insured for the entire package from me as a private individual to your FFL. Add another $50 if I need to ship from an FFL, or subtract $100 for local Indiana sales (near Tippecanoe County). I’ll consider reasonable offers, but I’m not desperate for a quick sale so please save those lowballs offers for someone else. . The 10rnd mags go for ~$65-70/ea or so, and the 5rnd usually go for ~$50. The TBM comes with one 5rnd and one 10rnd, so I have an additional ~$490 in mags here, setting you up for life on mags!

No trades please, I’m making some big changes due to health stuff and have a specific path forward from here that’s too complicated to get involved with trades.

Payment to be made via USPS MO or Zelle. I’ll also accept a personal check if you’re OK waiting for it to clear before I ship. No PayPal, no Venmo. I realize this is an expensive item, so I’m absolutely happy to call and speak with you directly. My feedback is extensive both here and elsewhere, but whatever I can to do help you be confident in your purchase, I’ll try my best to do. *To help cut out scammers, YOU MUST PM ME FIRST! Again for those in the back, YOU MUST PM ME FIRST!* Any questions, just ask me. Thanks!

Bottom metals
Tac adj cheekrest mech
Grips
Mags
3rd- sm and med
5rd- med x2
Buttpads
3-lite compacts
5-standard t3x
1-limbsaver t3x
Everything in picture for $SOLD shipped priority mail. Feel free to ask questions. Venmo, zelle, usps mo only.

New Season, new start to the podcast,

I was damaging controlling why the Live Stream feeds were crashing on Facebook and X and I missed a bunch of episodes. Now we are ready to return with the weekly show. We'll have new guests coming up really soon.

Welcome to the Everyday Sniper Podcast, yes the music got overwritten so I wasn't about to play it. I thought I had this sorted out but apparently I missed something. Damn Updates !

In this episode I want to catch you up as to why I missed a few episode over the last month or so. I was actually damage controlling the video for simulcasting to other places. I can send this Sniper's Hide and TheHide.TV easy enough, but the signal was crashing.

In this episode I talk,

Going Live with Training & Firearms

Western Hunter Ultimate Challenge Match

Future Interviews on the way.

Gear reviews, We have the Eotech Vudu 3-9x here along with a host of other products to talk about.

6mm Arc Project !

Thanks for the patience of me getting my shit together. It was a process and I had to follow the process to try and keep things stable. I feel I am stable now, other than potential conflicts with my home internet.

Head over to Hide TV for more videos, articles, contests, etc.

Login to view embedded media

Hello,
I was watching a video on YouTube and there were several prone shooters, shooting 1000 yards, that were using what appeared to be a padded shooting mat and their bipod was setup in the mat. Very new precision shooter here and to me that seemed less stable than using the ground. They looked to cant to me as the bipod wobbled on padding. What is best placement of the bipod when using a padded mat?

Thank you,
Dep

100 New gunwerks 7 PRC brass. All fully prepped. Run through a 2 thou under expander mandrel, chamfered and deburred. Plastic cases included.

180 shipped. Same price as midway for unprepped, no ammo cases.

a tad lower at luckygunner .47 per

Looks interesting. Video is a little...

Login to view embedded media

this could go in the Ukraine thread but it goes to my more gen ? i know it is early in the trump admin,that there are many huge probs he inherited,i know he is getting insane push back from the left. i still have a concern about several things,this being 1. Putin has said no temp cease fires only some final result on acceptable terms to him. that makes sense in context here.
IMHO any aid to Ukraine at all should be stopped now and forever. resuming mil and intel aid seems like a red flag waved at Russia. can't see how this aids a peace deal. we should stop all aid and offer to broker a deal-nothing else.
of course all "aid" should be stopped going everywhere. we are way more than broke. we need funding here,which is a separate discussion. RFK backing off on MMR vaccine is another ? i have.
grabbing a few thousand illegals is under achievement i think. i have lost a lot of confidence in many of his chosen helpers.
it just appears that many campaign commitments to action have gotten sluggish.
is this being unrealistic and hoping to see too much sooner than possible? yea,i know my concerns are of no importance to the rulers.

The Dems, Marxists, and Never-Trumpers are on this boat claiming Trump is doing Putin’s bidding. It’s almost hilarious when you consider these brutal harsh facts about Trump’s actual conduct towards Putin and Russia:


1. Trump unleashing of US energy dominance and cheap pricing to fuel the US economy. This wasn’t done to hurt anyone else, just help the US. As a result, it sent the WTI into 1/4th of what it needs to be for Russian GDP growth. This was probably the most damaging thing Trump did in his first 4 years to Russia’s oil/NG-dependent economy.

2. Battle of Khasham, Feb 2018, Syria. Putin sent a Russian Wagner-led armored battle group with 2 armored battalions, artillery support, air support, and engineers to attack a tiny group of US SOF personnel at the Conoco plant near Khasham, which was across the river and well-past Russia’s line of demarcation agreed upon by the US and Russia. Trump WH responded by authorized total gloves-off annihilation of the Russian forces over a 6hr period through the night, resulting in scores of Russian Wagner mercy KIA, and scores of Syrians killed. No US President has ever taken the gloves off of US forces in any potential conflict between Russians and US personnel.

3. Just in case Putin didn’t get the message, Trump signed off on massive foreign military sales to Ukraine that they paid for, including huge shipments of Javelin Anti-Tank Guided Missiles and CLUs, as well as patrol boats and associated weapons. The Javelin ATGMs sent by Trump were crucial in stopping Putin’s armored columns later in 2022. No other US President authorized weapons sales to Ukraine, and in fact, several worked hard to stop European allies from sending weapons even when they wanted to. Example: Obama and David Cameron in Sep., 2014.

4. Trump shut down German involvement with Putin’s Nordtream 2, threatening enactment of the National Defense Authorization Act in 2019. This hurt Russia’s energy industry and helped to prevent Europe from being even further-beholden to Russian oil/NG exports than they already were.


US energy focus, Khasham, Javelins to Ukraine, and Nordstream 2 shut down. All some of the most effective counter-Russian foreign policy moves from a US President in history. It’s weird that no corporate US media covers any of these facts.

Hide,

I have a handful of ARs, but looking for which of my two suppressors to put on a .300 Blackout 8.5 inch. I have a TBAC Magnus I run on my bolt guns, and a Huxwrx Flow 7.62 TI that I run on my ARs. However, I have an 8.5 inch AR pistol with a brace/JP captured buffer and adjustable gas block and I’m not sure what to run. It seems the hux may not perform as well with subsonics, so I’m wondering whether I should throw the Magnus on and adjust the gas down.

I could experiment a bit, but figured I’d come to folks with more experience. Rig has a 1x red dot and would just be mostly plinking and some transition drills.

Thanks in advance.

Gen 2 PST 3-15x44 with the EBR-2D reticle(which was only available for a limited time through certain vendors I believe). Mounted on a 18” AR for midrange work and has been great in that role. Im turning this upper into a designated thermal upper so im looking to recoup some funds. Its in a Warne 20moa mount and would like to sell it together for $500 shipped but will split if I have too. Glass is clean and the only marks on the scope are on the battery cap and elevation turret from using a coin to remove the caps. Feel free to message me for more details.

I am having a Remington 40-x converted to a 300PRC I need to get a muzzle brake. Can anyone recommend a good one? Thanks

Gray Ops
AW 6GT 12rnd Magazine for sale;
$135 shipped

I accept PayPal Friends and Family and USPS Postal Money Orders. Please see my feedback, many happy customers.

Well, it had a noble mission in the beginning. It’s been turned into nothing but a giant funnel for stealing money from taxpayers and screwing over countries all over the world with strings that they didn’t want.

Massive waste of American money and influence. Because everybody who was involved in, it was a socialist Pushing a non-American agenda.

Fucking awesome!!

MPA brass catcher. Minimal use all parts that came with it new.

$185 shipped. PayPal FF or you add 3% for G&S

I'm finally moving on from the RimX testing. 38 barrels and 25,000+ rounds tested is enough for me. We got some excellent barrel and ammo data on the RimX over the past few yeats and put the RimX through its paces since day 1.

The RimX exceeded my expectations in every way. With its revolutionary bolt design, making headspace not matter, it went against everything we knew about rimfires up until its release. Accuracy blew me away, shooting lot tested ammo @ 50yd into 50rd 0.1 agg and 100yd sub 0.5" 30rd agg.

My RimX is one of my favorite guns to shoot and it's not going anywhere. But I'm done testing barrels for it. Lots of great options out there to choose from. Manzella Precision is putting out some RimX tack drivers right now.

I'm now starting a new Rimfire project to see how much Accuracy and consistency I can pull out of 22lr. And how much more I can pull out compared to my best RimX results.

I picked up a brand new Holeshot 2500x from KSS and I'm putting together a full Rimfire BR rig.

I'm going to have 4 or 5 barrels done for it to test. To start, the first 2 in hand that are going out to be cut are a Mullerworks and Green Mountain. Green Mountains aren't used in the rimfire BR world, but I have a few in the shop so why not have one fitted and see how it compares to the MW, Shilens, and Benchmarks of the world. I'm waiting on a Shilen to arrive thats on order and will have an Ace on the way. I'll have those 2 done later on. Most are shooting 0.900 straight barrels in these setups, some shoot 1.2's but 900 are the norm.. I could only get these straights right now so maybe the next two will be 900's. We will see and test.



Holeshot 2500X
Bix N Andy Comp 2 Stage
Murphy Precision SS 20moa base
Mullerworks 1.2" 8 groove 1-13
Green Mountain 1.2" 6 Groove 1-16
22lr Match Eachus chamber
PWC Randy Owens High stock

Haven't made my mind up on what scope will live on it. I have a whole bunch of lots of Midas, CenterX, R50, RWS Special Match, SK+, and SK RM to test.

Stay tuned....



Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media
Login to view embedded media

Sold the rifle this was so don’t need it sitting around tempting me for another build.

This is the second focal plane mil reticle/turrets. The coin a lot for the elevation turret is marred up a bit but still completely functional.

Asking $800 for the scope
$110 for the rings
$125 for the flatline ops level.

One of the screws for the the ring cap has some rust on it as pictured.

Open to trades toward 9mm pistols or maybe other stuff. Send me some ideas.

2 Accuracy International FDE AT-X chassis for short action 700 footprints. These have the longer fore-end. They have had rifles mounted in them but have never been used in the field. They both come with thumb rests and bag riders. One has the hoptic cheek pad

$1375 shipped per chassis shipped
$2700 shipped for both

Colt 601 early Vietnam clone. $975 shipped to your FFL



-Original and correct Vietnam era surplus no trapdoor, butt stock, triangle handguards, and pistol grip
- Chrome lined barrel, 20", 1-12 twist for shooting .223 55gr bullets
-A1 3 prong flash hider
-Bayonet lug
- Front sight base is not F-marked, meaning the round, tapered front sight post is properly in line with the carry handle rear sight.
-Correct silver colored (Nickel-Boron) bolt carrier group
-Slick side upper, Anchor marked
-Slab-side lower with ball detent front takedown pin
-Correct early charging handle
-Flat Delta ring
-601 roll marked H&R lower
-Early 20 round waffle magazine
-6 lb 15 oz weight
-Custom Battle-worn Cerakote




























On April 19, 1963, military aide Gen. Chester V. Clifton brought two firearms into the Oval Office to show them to President John F. Kennedy. One was a crossbow intended for use in counterinsurgency operations, and the other was an AR-15, the Colt Model 601. Serial production of the Model 601 began in December 1959, and continued through to the summer of 1963. During that time, more than 14,000 of them came off the assembly line.



Kennedy with Colt 601 Colt 601 Note waffle mag, slick side lower A U.S. Navy SEAL armed with a Colt/ArmaLite Model 601 is seen here during a training exercise on St. Thomas, U.S. Virgin Islands on February 21, 1963.


Built by Me

Just as title says. I have a Geissele Super Dynamic-Enhanced (SD-E™) Trigger. It is in perfect working condition not a single thing wrong with it. I just went a different route 120 plus fees a shipping thanks in advance I will post pics when I get home this evenin.

First up -
Spuhr A-0009 DeltaPoint Mount RDS plate for Spuhr ISMS Mounts (works with hunting mounts too). Trade for A-0010 RMR plate. I sold my Leupold DPP and now have RMR RDS. Asking $40 shipped.

$$$SOLD HK Rotary Sight tool for Diopter Sights, bought this for my very first gas gun - HK91 in 1990, sold gun and this has been sitting around in the miscellaneous box for years, great condition > asking $$$SOLD

$$SOLD Magpul PMAG coupler (Maglink) - connect two pmags together. Free - you pay shipping.

Hi friend:
Like new optic and mount
VORTEX 1-6 MRAD/Retilia mount 1.54H package $1300 ship
red dot not included
Accept payment: Venmo,Zelle,Paypal
any question: 310-357-6026
thanks

Selling one: Leupold Mark4 6-24 with a PR3 reticle. Leupold# 183824. Brand new. Still in the wrapper. 1000$ shipped conus obo.