Just picked up my lone peak fusion action and have a 6.5mm bartlein barrel i want to turn into a 6.5cm and need a good gunsmith to chamber my barrel. Originally I was gunna do a prefit but more and more Im thinking im going to send in my action and have them custom cut it for my action to eek out as much precision as I can. I know bugholes is a great place especially for prefits but idk about custom chamberings? I know sac does custom jobs. Does anyone have experience with their barrel work? Anyone else you can think of that you know does great work throw me a comment and let me know.
Thanks

30moa a Sako quad 11mm dovetail to picitinny scope base.

Asking $80 shipped to lower 48
Prefer PayPal friends and family

I recently purchased the 457 Varmint in22lr non MTR. Have only shot it in back of my house at 25yds. Haven't been to the range yet for 50yd shooting. Just from the research online, It seems a lot of folks are not getting very good accuracy. Some say no matter what ammo they have tried. The last CZ I owned was a 452 Varmint in 22LR years back. The 452 was very accurate even with the Federal 510 rounds. I'm just trying to see if a lot of folks on this forum have had poor accuracy out of this particular model. Also, if anyone found solutions to accuracy problems other than barrel replacement. I plan to install a yo dave trigger. Thanks for all input! I plan to experiment with action screw torque.

I have been in the forums looking around for several years. Just recently started getting into long-range stuff. Finally decided to make an account and expand my knowledge. I have been into guns since I could walk and am now in my early 20s. With my dad a police officer on the S.W.A.T. team for two decades, guns became a part of my life and always fascinated me, with me wanting to know more about them.

Hello Hide. Selling a 338 AI chassis. Chassis in like new condition and not altered in an way.

I have two new barrels that were intended for a Curtis Valor quick change, but they are the same as Terminus.

Both are Krieger stainless Remington Varmint/Sendero contour.

First barrel:
6.5 Creedmoor
1-8 twist
Finished at 16”
Threaded 5/8
Spiral fluted
Cerakoted black

Second barrel:
6.8 Western
1-8 twist
Finished at 24”
Threaded 5/8
Spiral fluted
Cerakoted black

The work was done by Alamo Precision Rifles in Texas.

I have over $1,200 in each of these. Price for each is $825 shipped.

If you want additional pics, videos, facetime or to talk on the phone, I am happy to do it.

Trade interests are any 700 clone action with mag bolt face in short or long action. I would also be interested in hunting/tactical stocks such as Manner’s, McMillan, Foundation, etc. for 700 clones.

Anything else, you are welcome to ask.

Hello dead horse. Looking for some advice. Bought a scope from a hide member, turned out to be MOA, decided to live with my mistake since it was a LPVO and l’ll run it anyway.

Edit: decided to send in the other MOA scope and get MRAD. Its important to standardize within your shooting team..

Swarovski NL Pure 10x42 with outdoorsman’s stud and marsupial harness with box. $2500 tyd

I’ve been a member here for a long time but never posted due to fees I have quite a bit of feedback on Rokslide though.

Used Timney Calvin elite
2 stage
Flat shoe
Rem 700 with bolt release
All black

$160 shipped

Swarovski 65 Objective for STX/ATX NIB $1000 tyd

I’ve been a member here for a long time but never posted due to fees I have quite a bit of feedback on Rokslide though.

New in box LEUPOLD MARK 5 CF-455 TRIPOD KIT BLACK/SHADOW TAN.

$950 shipped to lower 48. PayPal f&f or Venmo.

I was planning on building a new 7PRC but then I came across some reviews on the new Weatherby 307's. The Alpine CT was basically the same gun I was planning to build with the same Peak 44 stock. Buying one saved me about $1500 so I decided I'd give it a try. They guarantee 1 MOA and alot of the reports I saw had them shooting better than that. I put a Maven RS 1.2 scope with Nightforce rings on it. Cleaned it and broke in the barrel trying out a few different factory loads. It feels great and shoots very well. I have no complaints on the gun or the scope. Best results so far were 3 shots .5" using Federal 175 ELDX running 2880 fps. with the Hornady 175 ELDX coming in right behind it at .75" at 2835 fps. Hopefully it gets even better with a few more rounds down the tube. It also weighs in at 8 lbs 6 oz scoped.

SOLD

Looking for a Spuhr 4302 in like new to good condition.

Thinking Around the $350 range.

I’m located in the Sacramento, CA area.

Thanks.

By the feds - local talent couldn’t be bothered to go after convicted sexual predators in their city .
Had tickets to write , old lady’s and mentally handicapped to abuse and any free time is usually used up shooting dogs.

Huston police were just the stars of a viral video abusing a blind man and a paraplegic man and their female companion. With paper work and lawsuits and depositions they just didn’t have time to go after illegal invaders that like to fuck kids .

Immigration...too bad hasta la Vista thieves.
Login to view embedded media

Knife is in excellent shape and smooth as butter. Been carried a couple of times. M390 steel. Asking $350 shipped, pp ff,venmo,zelle.

Figured I’d start a thread for a new build I’m working on. It will be based on a bead blasted RTR .223 Wylde 16.25" Mk12 Mod-H barrel with headspaced bolt & set screw gas block, SOLGW M89 13” rail, Lantac Billet upper (thermofit), Lantac enhanced bolt carrier, BCM MK2 ambi CH.

I’ll being using a different muzzle device than the one in the below pic. Currently waiting on a Cross Machine Tool Tactical Combat Flash Comp. Will update the thread as I put it together and load up some 77 smk’s for it in some ‘25 LC brass with a variety of powders.

I will likely pair it with an aero m4e1 lower with geissele ssa-e x trigger, FCD safety, maritime bolt catch/release, geissele super42 buffer spring (h2 buffer), Magpul k2+ grip, and magpul dt-pr stock.

Login to view embedded media
The only reason I can remember this guy’s name…



…is this guy here.

Getting too old.

Apparently this is not being received well.

Login to view embedded media

Great working condition. FDE color. A few nicks as can be seen in the pictures. Local pickup or shipping. Asking $1300

Zelle, Venmo, or Paypal. Add 3% for FF

Want to buy an MDT ACC Elite chassis. Let me know what you have. Thanks!

***EDIT*** Found one

Hi All

Been lurking around the Hide off and on for a few years, decided to finally introduce myself. I’ve been a pistol shooter for many years, shot some local USPSA back in the 90s before work and life got in the way. Never much time behind a long gun but I enjoy it and hope to shoot some longer range stuff. Struggling with whether or not to keep the older REM 700 5r .308 I have already or switch to something more up to date with lighter faster projectiles. Here to learn!

Spuhr QDP-4002: 34mm Picatinny Mount 0 MOA - 1.5"​

Correct height for night vision or thermal clip-on use. Never fielded, I sold the rifle this was going to live on.

450 shipped

I will post pictures of all these items following the post as all the pictures are on my phone. Will be listed in numbered order. So if there is anything your interested in, just PM me the number. All prices is shipped and payment preferred if PP F&F. Feel free to check my feedback. Not interested in any trades.

1. SPF - Kestrel 5700 with a Short Action Precision belt holster. $350 with holster or $325 without. If you just want the holster, $30.00
2. Night Force 20 MOA steel base with screws for LA 700 or clone. $50.00
3. SPF - Teslong Bore Scope - Don't know the exact model of this one. It is a USB model that plugs into a PC usb slot. Does not have a screen. Not been used but a few times. $50.00

All these items are in good to excellent / great condition. Stuff has been used a little so it's not mint. If you have any questions, feel free to shoot me a PM.