I have 4 CMMG 22ARC .22 LR 25 Round Magazines for sale. Sold my upper already but the buyer didn’t want all the magazines. They’ll work with pretty much any AR22 that uses the CMMG/RTB/BoreBuddy style bolt. Two are still brand new in the original packaging.

CMMG Part Number: 22AFC25

Asking $80.00 shipped OBO SOLD
I accept Paypal F&F / Venmo / Zelle / Apple Pay

100 rnds down the pipe

Comes with HH buffer, ambi CH, and kac bcg/bolt (non e3.2) and rear sight.

Asking $1700 shipped

Modeled up some super basic adjustable retention mag pouches. 2 piece print and epoxied together. Single screw with rubber gaskety thing for tension. Not sure how helpful it’d be but if anyone wants the cad to print or modify I’ll send it to ya.

I currently have a RCBS Pocket 1500 and is terrible with the drift. Picking the powder pan up and placing it again shows drift as much as 0.3gr and goes back and forth so there's no way to judge what is the correct reading.
No drafts, wiped the thing with dryer sheet and as away from electronics as possible but the issue is still there.

Other than the beam scale, is there an electronic one that won't drift? Preferably with an auto trickler but not a necessity.
Budget is less than 300USD. That being said, I wouldn't want to spend 300 only to find out that I need to get a fx120 for reliable measure, so if I absolutely need to spend more, let me know and I'll delay my purchasing.

Thank you

For Sale.

PU scope in mount.

Mount is a Tula.

Scope is Factory #357 NKV (Leningrad/Omsk) .

Scope is in excellent shape, obviously as per photos it has some wear to the finish from use. Some bluing loss from age to the mount as you can see, all in keeping with age and fair use.

Scope turrets are very smooth, reticle moves through its full adjustment range smoothly.
Glass is clear, refer to photos for this.

Leather caps come with it, they look ok but have one split in the middle of the strap which might come apart with use.

Scope is located in Australia, I can ship for $25 . Time from me sending to most place in the USA about 7-10 days.

Paypal only payment option unless you are in Australia.

Ad is listed elsewhere so first taker post in thread please.

Hi brains trust. Surely someone here has fitted a MDT flush 3 round 308 polymer magazine into a short action Hawkins Hunter DBM?

Its very close to fitting but the magazine catch seems to protrude too much to get past the latch or fit into the slot the surrounds the latch. Im unsure whether to sand the catch down slightly or make it fit some other way. I cant imagine i'm the first to try this, before i ruin the magazine im wondering if anyone has any tips?!

~500rds through it. Spuhr claw mount. 4-lightly used 30rd HK mags. 2-new 30rd mags. I do not have the bungee sling for it. $2650 $2550 shipped.

ThunderBeast better step up lol!


Login to view embedded media

SCAR 20s with a factory 20" 6.5 creedmoor barrel. D wilson cut it down to 16" and reporifled it to accept AAC and Griffin OTB muzzle devices, as pictured. Has exactly 40 rounds through it otherwise brand new in the box. Ill include one extra 20rd mag.

I also have a brand new/unfired 308 barrel for this that was also cut to 16" (not reprofiled).

SOLD - barrels still available

I ordered a triggertech diamond 2 stage rem700 for my impact737r build. It came in a white envelope and when I opened it up the trigger was out of its recess and all the way to the side of the package. Did not take a Pic of that position. I slid it back to the recess and noticed a small nick in the anodizing. It was shipped all over the US, north to south to north then back down to me. The package it's self it beat up and crushed on one side. If I went to a store I would not buy it. I filed for a claim as my gunsmith said he would not use it without sending it in to have it checked at triggertech. The place where I bought it have been wonderful they said it wasn't shipped by them and the last trigger I bought from them came packed in a box with alot of foam. Am I wrong for wanting a replacement.

SOLD-WTS Swarovski STC 17-40x56 Spotting Scope in excellent condition. The perfect backpack Spotting Scope, it has outstanding optical quality in a lightweight compact package. Not interested in any trades at this time. Will come in the factory box with all of the factory paperwork and accessories. $$$ PayPal F&F for the form of payment. Price includes shipping to the lower 48, UPS adult signature required.

I will only sell to members that I can verify through their previous Hide transactions and feedback.​

I have a set of Burris XTR Signature rings for a 30mm scope. Height is 1.25 inches (height to center). Really nice set of rings that I’ve used for multiple scopes over the last year. I’ve upgraded most of my scopes to 34mm now so don’t have a use for these anymore. They’re really nice if you don’t want to leave marks on your scope tubes or want to add a little extra elevation range.

Comes with the original case, instructions, and inserts.

Asking $70.00 shipped OBO
I accept Paypal F&F / Venmo / Zelle / Apple Pay

Both new and unused.

Schmedium Heavy Fill- $85 shipped
Schmedium +1 Heavy Fill- Sold

Thanks for looking!

Not sure if this is just me and my guns but here is what I see after firing and resizing with a Redding Elite type S bushing die set.

I have 300 WM, .308win, 6.5cm and they all seem to fire a few times with neck sizing only then after the first 2 or 3 firings I would assume they would be my chamber size. So my 300 WM like 2.010 on my SAC comparator with a Mitutoyo caliper. I spray lube and I set my sizing die(on a Forrester CO-AX) until I get a 2.010 measurement(They are 2.014ish) when I start. I run 10 cases and I get 2.009, 2.006, 2.011, 2.012...

I cant for the life of me figure out why I get such a weird range of sizes with a fixed die in a decent press. I assume the cases arent all the same size when I start.

Below is my numbers from 50 rounds of PPU brass(I know its crap, It was factory ammo I bought for the brass when 300wm was hard to find). Its weird that the numbers get worse from min to max after sizing I would expect .0005 to .001 range after my process.

Any constructive thoughts would be appriciated. I know I need to invest in Lapua brass, I can't find any when I look locally.

Athlon Cronus BTR Gen 2 4.5-29x56 UHD Riflescopes, Your Choice, Only $1,199.99

This is the lowest price we have ever offered for this great scope.

A titan in long range precision, the Cronus BTR GEN2 is an ideal competition scope for your PRS rifle or PRS trainer rifle. Poor weather and low light conditions are no match for UHD extra-low dispersion lenses. Cut through mirage and leave the competition in the dust. From precision shooting to the most demanding hunt, the Cronus BTR GEN2 is up to the challenge. The next generation of the Cronus BTR is now equipped with our applauded internal stainless-steel component turret design producing sharp, loud, tactile clicks.

UHD Glass - Extra-Low Dispersion glass significantly reduces chromatic aberration giving you an utmost bright and sharp image with true color reproduction.

The illuminated reticle provides greater visibility during dusk and dawn and other low ambient light environment.

First focal plane reticle stays valid at all power settings allowing you to fully utilize the specially designed reticle that shrinks or grows along with your target as you zoom in or out. The reticle offers quick target engagement at low power while offering precise holdover positions with finer details.

Reticle etched on the glass that provides excellent backing support for complex reticle design and offers great durability and much higher shock resistance to recoil

Fully Multi-Coated optics effectively reduces reflected light and increases the transmission of light giving you a brighter image than normal single coated lenses

XPL Coating gives you an extra protection on the exterior lenses from dirt, oil and scratches or anything else mother nature can throw at you.

Precision Zero Stop System - The system allows you to lock down your zero position and dial back to it with a sharp and precise stop right at your zero mark even you are turning it in pitch-dark or blind folded.

High Precision Erector System The high precision erector system processed by high precision CNC machine with +/- 0.0001mm tolerance level to provide you the most accurate power settings and smoothest magnification change

Aircraft grade aluminum tube that has exceptional strength and superior mechanical integrity will protect these world class optics no matter what punishment you throw at it.

Exposed Direct Dial Turrets for elevation and windage allow you to quickly make adjustment as you needed and engage your target within a blink of your eyes

Heat treated one piece tube gives the scope extra strength over multi-piece tubes. A one piece tube also is better at keeping moisture out thus keeping your scope fog proof for the life of the product

Waterproof to protect the scope in the harshest weather conditions or if accidently submerged underwater

Fog proof to allow you to immediately engage your target when you take your rifle to cold ambient temperature from warm inside

Robust mechanical system with special designs on both control and erector system that give you the ultimate recoil resistance to withstand 1000G recoil for 1000 times.

Argon Purging uses the inertia gas with bigger size molecules to purge any moisture out of the tube giving you better waterproofing and thermal stability .

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.


Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

2 triggers available (1 pictured)

Both used but in perfect working order. Anti-tamper stickers are in place. Will come in box as seen.

Sold each shipped

Thanks for looking!

Bought some of the .308 167gr Swiss P Styx from Raven Rocks Precision. Has anyone loaded or used the factory ammo for hunting before? Can’t seem to find much online of any results on game.

Looking for a light profile 300 blk out barrel for impact action. can be used to what ever extent. I have several young kids im about to take on their first hunts so im trying to put together a young kid friendly size build.
Ideal would be something 16 inch size in a light profile and used simply from a cost stand point.

Thanks in advance

Defiance Tenacity Long Action with Mag bolt face. Cut for wyatt box or single AICS. Nitride'd action then cerakote outside in Coyote Brown. Has Alum 20 MOA rail for lighter weight.

Action has less than 100 rnds on it

Manners EH1 long action stock. stock has seekins CIP bottom metal and will come with one CIP length mag so good for 300 PRC and such loading the bullet long like it should be and still fit in the mag. Stock was bedded by Joe Walls, so there isn't a better bedding job out there.

no trigger

$950 for the action
$1900 for action, stock, bottom metal

NO TRADES
FFL must accept from individual.

Selling seven boxes of Hornady 6mm Creedmoor 87gr Varmint Express. These are all from the same lot. Priced aggressively lower than the absolute cheapest I can find anywhere.

Price: $150 shipped SOLD SOLD SOLD

No trades please.

New in box Coup de Grace

Right hand
308 bolt
Hourglass knob
Pivoting
20 MOA rail

DM for Pricing

I've seen and used the two models decades ago, but for the life of me I can't remember other than Mark 4's were in black boxes, blacked out gold ring, and the maybe a different P/N?

I have a Vari-X III 3.5-10x40mm Long Range M3, Matte P/N 51850 with the 3/4 Mil Dot #030123 mounted in M4 Steel rings. It has the .223 Rem. 55 gr. turret cap, a 308 Win 168 gr., the 180 gr. 30'06 Sprg. and the 190 gr. 300 Win Mag.

I bought it new back in the very early 2000's, or late 1990's and I remember debating which to purchase, and for some reason ended up with this one. Haven't seen a Mark 4 in years, but I've seen these come up FS. What ever happened to the earlier Mark 4's? What are the worth? Are they a better made scope vs the Vari-X III M3 Long Range?

Asking $800

Comes with:
Case
Pistol
Optic
2x 15rd Magazines
Blackhawk OWB
Versacarry IWB


I am original owner. I have about 3-4k rounds through this, still in great condition. Buyer pays shipping. Can meet if near Houston, TX area. MUST BE LEGALLY ELIGIBLE TO OWN/PURCHASE HANDGUN.

Login to view embedded media
Enough Said

I'm thinking about putting this stock on a JP LRP-07. I'd like to hear from anyone that uses this stock on an AR or as part of XLR's chassis. I'm particularly interested in how solid the cheekpiece feels and whether there is any noticeable flex in the top of the buttplate (which is not supported - the angular bracing part just comes to about the middle of the plate).

Thanks,

Dave