Have a day scope in a set of non QD rings. Wanting to use the rifle with a thermal (on a QD mount) but still have the option for the day scope without re-zeroing. Can you simply remove the rings/scope from the rail then remount in the same slots and call it good?

Looking for something other than the factory Leupold case for my lrf as frankly this thing sucks. Are there any nice padded cases or hard cases you guys prefer?

Couple things for sale here:

Hornady 4DOF Kestrel. Comes with new TYR carry case. Like new and unused $360 shipped.

Armageddon Gear Squishy Rear Bag. $SOLD shipped.

Armageddon Gear shooting Mat. Like new and unused $SOLD shipped.

One of my gun safes is a little Sentry 16 gun with a dial combination. A while back I went to open it, dialed in the combo, and cranked the latch a partial turn when everything seized up. The latch lever won't open or close. The combo dial won't turn in either direction. There's a lot of guns inside I can't get to.

I know I could solve this issue with an angle grinder and a prybar, but I would rather not do that.

I've tried, very gently, using a rubber mallet around the door to jar whatever's jammed into letting loose. This didn't help.

I've watched various UTube videos, and from those I get the sense that gravity plays a role in how the combination/tumbler mechanism works. This makes me wonder if inverting the safe (Again, very gently. There one hell of a lot of investments inside.) might let me get things freed up.

Obviously, once I get it open all guns are getting removed until after I've had a Locksmith make sure the lock mechanisms properly fixed. Failing that, I'll get a new safe.

Has anyone else had this sort of thing happen? If so, how did you resolve it.
Thanks

I believe this is the micro mini. Used just a few times to try it out. Spotlight fill weighs 1lb 1.6oz. Rubber arched
Asking $65 shipped PayPal F&F
Need a few days to ship due to work schedule

GEN II PST 1-6 MRAD

PayPal FF or Zelle

*mount no longer for sale

Thanks,

$1100 takes all. Or:

Trijicon RMR HRS Type 2 Reflex Red Dot Sight Adjustable LED 3.25 MOA Red Dot Hard Anodized Coyote Brown
Excellent+ condition
Retail $549
Sale price $450



Geissele 14.5 in Super Modular Rail M-Loc DDC
Excellent condition
Current discounted retail $341
Sale price $250



Geissele Super Charging Handle DDC
Excellent condition
Current discounted retail $92
Sale price $50



HK 416, MR556 & MR762 Battle Grip With Storage - Tan
Excellent+ condition
Retail $130
Sale price $75



H&K RAL 8000 Vertical Foregrip
Excellent+ condition
Retail $65
Sale price $35



HK German Vertical Grip - Black
Excellent+ condition
Retail $100
Sale price $50



H&K HK MR556/416 Slim Line Stock - RAL 8K
Excellent+ condition
Retail $250
Sale price $150



(4) HK MR556-A1 10rd Magazine 235642S
Excellent condition
Retail $272 ($69ea)
Sale price $175

(5) Lancer Systems L5 AWM 10/20 Advanced Warfighter Magazine AR-15 223 Remington, 5.56x45mm, 300 AAC Blackout 10-Round Polymer FDE
Excellent+ condition
Retail $138 ($23ea)
Sale price $70

Looking to sell my Bartlein Mod400 6mm blank. 27" long, modified MTU (1" muzzle at 26"), 5R, RH twist. 1:8 to 1:7 gain twist. I've shot over a dozen of this exact same spec barrel and they have all been fantastic. Changing contour is my only reason for letting go.
$500 tyd

NO TRADES OR OFFERS PLEASE. Zelle or USPS MO only.

Have 2-new in packaging. 175 shipped, 2 for 340 shipped.

No trades or offers please. Both new, can’t find an actual blem on either..M4-loaded, enhanced-$125 shipped. M5, stripped-$110 shipped. Zelle/USPS MO

Hi guys and gals,

Over the next month I will be putting together my .45 Raptor bolt action hunting rifle. I have some reloading supplies on hand and some on the way presently. I am looking for any tips, recommendations, and cool load info that anyone might be willing to share.

Let's see those recipes!!

I very much appreciate any help that is given.

Im splitting case heads and im about at my end as I cannot figure out why.

• Headspace is set correctly with PTG go/no-go guages - im very confident this is not the issue
• Measurements taken .5000" above rim
  • Sized brass: .4715"
  • Fired case: .4815"
  • PTG Gauge is .4760"
• Variety of bullets: hornady 250gr FTX, Parker 275gr Black Max, 250gr CEB Maximus all jumped .007-.025" (ie. not jammed causing a pressure spike)
• Powders used: Lil Gun, H110, VV N110
  • Only tested near the min charges (Min varies by book, but figure about 41gr of h110 for a 265gr bullet, 32gr of VV110)
• Dies: Hornady 460 S&W
• minimal taper crimp - just enough to remove the bell (Case mouth diameter = .4760 post crimp)
• Primer: Fed 215M
• Platform: Bolt gun

I spoke with several different gunsmiths, and the consensus was the chamber was oversized based on the cases not growing in length and the amount the diameter grew, so I sent the barrel back to the MFG and they said its within their spec. So Starline offered to take a look at the brass and they said brass was good, but it may be getting oversized and thought maybe trying a 45 Colt sizer would be better. Since its all sized and splitting with even a minimum charge, I cant really test that right now (not to mention H110 is and VV110 is still out).

Does anyone load for this cartridge and offer any advice?

I am going to ask a question which I presume is probably impossible to answer online but heck here it goes anyway.

How did you become adept at using the Hornady / Stoney Point seating depth tool? I have been told by a few folks it's a matter of developing a feel for it - ok fair enough I accept that but how did you go about doing that?

I periodically break out the tool and try to figure out where the lands are in a barrel and if I do it 5 times I get 5 different measurements, if I do it 10 I get 10, 20 I get 20 so on and so on. At some point I stop due to frustration and irritation, and I go back to just loading book length or mag length until time passes and I think well I should try to do this again and see what the results are if I change the seating depth.

TIA

24 Inch Carbon Fiber (looks like a proof blank but I can not say for sure) Cut for Zermatt Big Horn TL3 chambered in 260 Remington... 1 in 8 Twist ......I bought online and wanted the action so I don't know a lot about this tube other than the action it was on looked virtually new with few to maybe no rounds fired. It is of coarse not a prefit from proof but I have no idea who did the work. I have shot this barrel about 50-60 rounds and it has performed great shooting 130 ELDM (under moa easily) and 105 Sierra Blitz Kings (Under Half MOA at 3050fps) I have Fired this barrel from a TL3 as well as a Origin with the Hunts lug and all is good to go on the Chamber and headspace Looks to be Sendero Contour and weighs 2lb 13oz .........I really dont need the barrel as I have a 260AI barrel for hunting so offering this up as a pretty good deal for a great shooting carbon barrel....sold

Vudoo Gen 2 action
- Right Hand
- 30 MOA Rail
- Large Three Ring Knob
Ace 22'' MTU barrel - threaded and capped
- cerokoted in Cobalt
BA has a TT Diamond flat shoe

MPA ESR Chassis
- Enhanced NV Bridge
- Cerokoted in Sniper Green

4 10rd plastic mags
Bore Guide
Misc Items that were sent with it from the VGW factoring for the BA, Chassis, and trigger

Will ship with a plano case inside a cardboard box

Less than 50 rounds down the pipe. Ordered the rifle for matches. Moved for a job while it was being built and we dont have any prs or 22 matches out here. Shoot my 16'' kukri and krg when I want 22 time.

$2750 Shipped for the rifle, mags and accessories. For another $250.00 I'll Ship 2k rounds of SK STD Plus. Venmo or PP F&F only.

Got a different toy on my radar for the winter sports. Want to get this moved quick, so if you're interested send an offer.

No Trades, Not seperating ammo from rifle.

Hello All,

I'm getting ready to pick up an ASXR next week, and I've seen reports of the 300 Win Mag magazines not feeding well. I talked to the fine folks at MH, and they said they could adjust the mags if they didn't feed. Is there a high-quality and reliable alternative to AI mags? I need to pick up a couple, and I'd rather buy something that works without having to mail it back to be fixed.

I really appreciate any help you can provide.

Used Curtis axiom WTO switch lug short action. Action is stamped MPA. Action has 3200 rounds on it.

Optional 26 inch MPA barrel with 3200 rounds on the barrel. Barrel shoots great and still has plenty of life.



Action: 700 shipped
Barreled action with break: 850 shipped

The last stock I bought from McMillan lasted until I sold the rifle (8 years).

Why should I buy Manners over McMillan, or is it just preference?

I have a Pulsar Trail XQ50 that I currently use as my primary scope. I am the second owner and it is out of warranty. It has some striations or vertical lines that show in the scope and don’t go away until I nuc it. The scope is still usable, holds zero and can provide a nice picture. Though the lines can be annoying. They are easily fixed, but come back after a few minutes. I called pulsar about sending it in to possibly fix, but won’t know price or if it’s even fixable until they get the device in hand.

Should I send it in? I’m worried since the trail is no longer produced, that I am SOL. I’d hate to ship it to them on my dime, just for them to say it’s not fixable.

26” 1:10 twist, new never fired with brake

$775 shipped

Been wanting to try one of these out.
Looking to buy one if priced right.

Not for sure how many of variations there are of this scope, (if any) but I want FFP, Mil, illuminated reticle.

Thanks.

Title prettty much says it all. Not too picky on color, just needs to be for R700 SA footprint.

Used Area 419 Zero Press
No major signs of wear, everything still feels like new.
Will include the press itself and all original accessories in the original box. (Press, mounting hardware & plate, primer tray, & torque wrench)

Asking $950 SOLD Shipped CONUS

These Leica Geovid Pro 10x32 range finding binoculars are truly fantastic. Only selling to upgrade gear. Used but like new in original packaging. Very well cared for and absolutely no issues with function. Glass is in perfect condition.

$2,350 TYD (CONUS only). No trades please.

Been lurking on the forum for many years, just never made any posts. So figured I'd go ahead and start!

Been shooting a my entire adult life (military) and have competed with pistol and carbine. I'm looking to give PRS a try, so I built a semi custom rifle based off a tikka t3x.