Lets see the body cam footage. Justified or just the bad apple?

Oh wait, no body cam or dash cam video? Then it's a good shoot.

Sub machine guns to deal with lady/ kids outside without a mask . That is not a man or a police officer that is a Gestapo thug .

In CA no less where mass murdering child fucking illegals can walk the streets completely safe from these same goons .

Starting with Remington 7MM SAUM brass, You'll need:
Redding 7MM Saum Competiton dies(Type "S" match)
.295 and .291 bushings
.264 Expander mandrel
Feeler gauge
Neck turning tool
Neck trimmer
Caliper
Deburring tool
Priming tool
NECO case neck lube kit

Use the .295 bushing and run the brass through, necking down. I lube the necks on new brass and the entire case if it's once fired 7 SAUM brass.



The next step is to run the brass through your expander mandrel, with a .264 mandrel to ready it for turning....




Set you neck turning tool at 15 thousandts with a feeler gauge, and turn the necks all the way to the neck/shoulder junction. Use of the moly coated shot to slick up the inside of the necks will really help the process and keep the brass from "galling".





Like so....



Trim to 2.025" and deburr inside and out....



Prime, charge and seat bullets per usual.

After the initial firing I use the .291 bushing in the sizing process.


Runout has been stellar on the 500 rounds I've processed using this method.



It's been worth every bit of effort.

A poster came up with a great idea. Ship them to an isolated island, where they can kill each other! Have cameras setup everywhere for pay per view.



“We also have many violent criminals in our country, however, that did not necessarily come here illegally, but have been arrested 30 times, 35 times, 41,42 times, in a couple of cases,” Trump said.

He then highlighted heinous crimes, ranging from murder in general to criminals pushing passengers in front of subways to baseball bat assaults to violent home invasions of elderly folks.

“I don’t want these violent repeat offenders in our country any more than I want illegal aliens from other countries who misbehave,” Trump said.

“And I say, and this is subject to getting it approved, but if they’ve been arrested many, many times–they’re repeat offenders by many numbers–I want them out of our country,” he added. “I also will be seeking permission to do so.”

Trump then said America would pay “a very small fee” to a “foreign land” that housed the worst of criminals:

Obviously, Badger Ordinance IMUNS is out of the question. Is there any other option for the old school AW thumbhole stock?

Last night I fired 5 handloaded rounds through my 20" 308 AR. FC brass, 175 smk bullet, 41.5 IMR4064, the 5 rounds average 2570 fps which is in the ballpark of normal for a 20" I believe.

However, I had 2 of the WLR primers piece at the edge..... see the 2 primers at the top of the pic in my hand. I don't believe I'm seeing any other pressure signs on the case head. The bummer is these pierced primers apparently stuck my ejector down, and cut little divots into my bolt face.

What would cause a primer to pierce at the edge like this? Is this bolt still safe to use once I get the ejector functioning again?

Finishing up my M40 replica. I still need to mount the sling mounts. Thanks to Tokiwartooth for rebuiding and anodizing my scope, Mike Lau for the receiver work, stamping the barrel and Shawn Broussard with Titan Precision in Iota, LA. for chambering, bedding, straightening out my screwups. Ready to go shoot.

Poll complete, we won! Thanks for your votes!

I've been out of the scope game for awhile. I currently own a nx8 4-32 ffp and a March 3-24x52 ffp.

The March was a very unique scope in weight and magnification range years ago when i purchased it. It's not the best at everything, but very versatile and I've taken multiple elk with it.

Contemplating getting a new scope for a new gun I'm dreaming up and wondering what has come out in recent years that is better than what I have.

I'm looking for something that is relatively light, has a pretty high magnification at the top end for load development, and a wide field of view on low power for hunting in timber. The reticle also needs to be visible in dark timber on low power without illumination. This is one area that the March really excels - looks like a duplex on 3x and the center dot is amazing for shooting groups on high power.

Any suggestions? Surely something better has had to come out in the past 8 years. The nx8 didn't exist when i bought the March. I like the nx8, but the March has a more versatile reticle.

Thanks!

For those interested in the WLVRN, I've put all my thoughts together here:

Desert Tech WLVRN

I am the original owner. I mounted it, zeroed, confirmed it tracked reliably and accurately, then it's been sitting. This scope is in like new condition and comes with everything it left Colorado with **rings are not included**.

I like these US made XTR III so much that this is my 3rd 5.5-30 & I had 2 of the 3.3-18X50. I think the 5.5-30 have noticably better optical performance than the 3.3-18 and I think the US made non illuminated versions are better than the Philippines made illuminated versions.

SPF $900 shipped, if you want insurance (I wouldn't do it because it's a scam) I'm happy to insure it but that cost is on the buyer. I prefer no PayPal as they are anti gun (but so are most all other options, so...) but I will accept it as long as it's discreet and the fee is on the buyer.

Trades:
-ARC Xylo chassis for a R700 SA right hand (possibly other similar chassis)
-Bushnell Match Pro ED 3-18X50
-Bushnell Broadhead LRF

Please reach out with any questions or for more pics.

Looking for a FFP MIL scope for hunting out west with a minimum magnification of 2x-3x and around 15x on the high end for practice at the range and longer shots. I’ve looked at the NX8 and Burris XTRs. Vortex has a bunch of options not sure which ones are worth it. I’m looking to stay around 1K with gov discounts. Durability is more of a concern than finding the clearest one. Am I missing any options from any other manufactures?

That’s right, you heard it here first folks, our very own Marxist turned capitalist flip flopper now has a rifle scope named after Facebook… eh, Meta.

Okay all joking aside, one of the most exciting optics announcements at SHOT is the new S&B Meta 3-18x42 but with a FFP flavor. Here are the specs, read them and weep, no - I mean literally weep because #FOVGate strikes again and the USA version gets shafted or restricted due to Swaro’s sketchy patent. But even with the lower FOV this could prove to be an amazing crossover optic, but where will the price land on Schmidt’s wheel of fortune, will it be $3k, $4k or maybe even $5k…



See attached file for specs

So my 2019 Nissan Titan, 73k miles needs a new engine. Known problem with a bad batch of cylinders, luck of the draw if you got one or not. I bought it new, still under warranty. 100k or 96 month. Keep it or ship it after I get it back? Everything else is in good shape. No other issues.

what's new from SHOT show in the long range rifle genre? looking to up my long range game in 2025.

I see this bullet was marketed for the 224 Valk. However, I'm having a long throated 223 built in a 7 twist and hope to push this bullet to 2800-2850 with H4895 or Varget in a 26" barrel. Does anyone here have experience with this bullet in a 223? The BC of it puts it up there with a 105/108 class 6mm bullets. The ballistics should be similar to a 6BR with very little recoil, good barrel life, and throw away brass to ease reloading.

Would love to hear from people shooting their bullet and any concerns they would have with my proposed set-up. This will be used as a PRS training rifle and used at local matches to save barrel life and money and while still being a fairly competitive round out to 800-900.

The man who attacks the speaker is Kamal Woods. He is the mayor's boyfriend, and was just placed on suspension from his job as director of parks, or something to that effect.
Would this not be a perfect example of a 1st Ammendment violation?

Login to view embedded media

New never used and not building on an XRS anymore. Asking $110 shipped conus PayPal F&F only.

Athlon Cronus Gen 2 - 7-42 Tactical Spotter with mil reticle. Brand new and honesty great little spotter, just decided spotting scopes aren’t for me.

Fantastic with night vision and thermal use because of the low base. I’ve included a couple of pics at 15 power at 125 yards.

Pride drop to $600, no trades please

Good morning everyone,

I have a lightly used Atlas Bipod with a GRAYOPS arca clamp. Everything works great on it, it’s just an extra one that I don’t need. It’s the normal BT65-NC Atlas bipod.

280 Shipped

During our recent Precision Rifle Class with MHSA, we had a ton of wind and even more sand. The sand was so bad in fact it crippled my MacBook Pro.

So my rifle was out in the sand the entire time with the bolt open. By the end of the weekend the trigger was not working 100% about every 3rd bolt lift the firing pin would drop. So I had to clean out the trigger to clear the sand from it.

Here is a video from the class

Login to view embedded media

I am looking for this mount in particular.

Hello Hide,

I am selling a new MDT LRA MV3 S90 Bracket for the Send it level or Crush it timer. This mount allows you to direct attach a Send it level to your Spuhr mount and a few other mounts and be super cool. I was hoping to use this on a PRS rig, but found out that it just won't work for me given how things are set up, so I had to go a different route. Never used, comes in the plastic baggie with screws and instructions.

I am asking $50 shipped. I accept payment via Paypal FtF, Venmo, and Zelle.

PM me with any questions.

Vivacious

Hello Hide,

Up for sale is a pair of AI/Wintac factory AT-X Keyslot Brass Internal weights. These were briefly mounted inside of my AT-X 6gt build, however I overestimated the amount of front weight I needed to balance this rig. They were used during load development, but never saw match conditions, so they are as they came new. Comes with the Keyslot fasteners installed. They were bought from Mile High sometime last fall. SKU: 009-1005.

I am asking $85 shipped for the two weights. I accept payment via Paypal FtF, Venmo, and Zelle.

PM me with any questions.

Vivacious

Hello Hide,

I am selling a Dead Air E-Brake for the Sandman line of suppressors. I was using this with my Sandman S on my .308 MWS to reduce backpressure and some recoil. However, I sold that rifle and have not used this item since. I believe that it has roughly 250 rounds of use on it. Small amounts of carbon exists on the inside of the brake, however the exterior of the brake is as new and shows no scrapes or blemishes.

I am asking $80 shipped. I accept payment via Paypal FtF, Venmo, and Zelle.

PM me with any questions.

Vivacious