A buddy and I have been tinkering around with some reloading recently and after a sort of expensive learning curve, we ended up finding the Mk316 Mod 0 recipe which worked perfect since we had a solid line of (relatively) cheap 175gr SMKs and IMR 4064. I was able to aquire some LC machine gun brass through a local shop that is all the same lot and then we've tried both CCI #34 and some Winchester military primers. The load has worked very well for us, landing about .75 MOA out of an LMT MWS and closer to .6 out of my custom R700. Honestly I'm almost comfortable using every component I have with this recipe, but the only thing holding me back from doing it is the fact that once in about every 10 or so rounds, I'll get a flier in a random direction that puts it at about a minute or sometimes a little worse. We're pretty exacting with our loading for our standards and what were expecting, cases all trimmed to within ±.002 case length, powder charge to the tenth of a grain, COAL measured on each round to be within a thousands or so. What would yalls best guess be for that error? Obviously there shooter, but between the two of us and 3 rifles, we can call our shots to be a solid string and still both end up with about that 1/10 figure. Maybe the brass has some inconsistency and we just discard that piece of brass for the next round of loading? I haven't been able to do more loading after firing it from our rifles, so maybe results will differ with a 3rd run. We're very much amateurs so any advice or ideas is appreciated.

This upper is in excellent condition, only has about 40 rounds down it.

- Aero M4E1 upper
- Faxon “match series” 12 inch 6 ARC barrel, 1/7.5T, 5R button rifled, carbine gas
- Suplerative Arms adjustable gas block
- Midwest Industries 10.5” combat rail
- Brownells bolt, don’t recall brand of carrier
- BCM mod 4 charging handle

$500 shipped for complete upper (lower is sold)

Shipping is to the lower 48 only where legal. PayPal or Venmo.

For sale. I bought this about 6 months ago. Super Trickler Gen 2 Software version 3.0.6. Bought from Super Trickler directly, not second hand. I’ve loaded probably 1500-2000 rounds on it paired to my A&D fx120i. It works great. No problems. Nothing broken. I just wanted to see what it was all about. Comes with everything that it should. I don’t have the original packaging anymore. 500$ PP plus however you want it shipped conus. Or face to face if you’re in the manatee county FL area. Cross posted.

Hey guys,
I recently removed my action from the stock to add some QD sling mounts. When I replaced it I noticed the action rocks forward and backward in the stock now. I’m not sure if it did or did not before. But I notice it now. Has anyone else had this problem and how did they fix it? Also is there any negative to using the wide bull barrel forend with a regular barrel? Thanks.

$375 shipped

It’s a prefit barrel for RimX action. Shot decent but I ended up getting a 26” barrel done for it.

In great shape. Lightly used. No big scratches or scuffs.
$290 shipped paypal, venmo, zelle


The RRS clamp is 175 if you can find them. The atlas is 295. 475 if buying new

Looking for load data for the Berger 85.5 for a valkyrie. Shooting ar platform.

3-15 x 44 CDX-ZL2 30mm FireDot Dublex (x2) 172368 - SOLD
3-15 x 56 CDX-ZL2 30mm FireDot Dublex (x1) 171390 - $SOLD Shipped
All are used but in great condition

Greetings all,

I'm selling a Nightforce ATACR C543, 4-16x50, second focal plane, 34mm tube. It has a Mil-R reticle, is illuminated, and has a zero stop. This scope was previously mounted and painted. There are slight ring marks visible and a few minor scuffs (like safe rash) which I have tried to capture in the pictures. The glass if flawless and the scope functions perfectly. Comes with the pictured caps, original box, paperwork, and tool. I'm asking $old shipped. Paypal F&F or Venmo is fine. Add 3% for commercial. Please don't hesitate to ask any questions.

*Heh, finally figured out how to add pictures w/o making a mess lol!

Edit to add: Previously rattle-can painted and I removed the paint.

I have a Brand New in factory packaging, U.S. Optics Anti Cant Device / Bubble Level up for sale. I bought this a few weeks ago and then picked up a Spuhr Scope Mount that has a Bubble Level built into it, so I no longer need this one as I am GTG with the Spuhr Mount.


Only $OLD Shipped.

Sig brace.

I have SBRd my MCX so no longer need it.

SOLD

Mpa built rife.

MPA branded Curtis Axiom short action with curtis conversion bolt
Uses Vudoo mags
24in comp contour 12 twist threaded 5/8x24
Threaded 5/8 w/ ATS tuner

Shoots under 1” at 100yds with the Eley match I have without tuning. It did really well with Lapua Long range as well.

$1550 shipped

Magpul Glock mags, haven’t used them in years.

As is- several marks from use

$90 takes all including shipping

5-21 round
4-17 round

Would prefer to sell as a lot

Make sure they’re legal in your state before buying thanks!

PayPal FF

I'm about to pull the trigger on a Henderson only issue for me is I'm not always doing large batches of brass. The most I do at one time is 200 to 225. I'm usually doing 20 to 50 usually. I use an older Lyman brass trimmer then use a drill to chamfer and deburr. My hands suck so the Henderson is the best one I found. I would use it everytime to slightly trim chamfer and deburr. I figure way more consistent but the batches I do I figured I would ask if there is anything else out there cheaper before I drop $1000.

Main caliber is 300 norma improved 35
30 nosler

Short action lcp model for 700 footprint has been painted but is new comes with 6 weights a thumb rest and bag rider hbar style forend. $1500 shipped

I have two slings for sale. One is a Rifles Only Bungee Sling and the other is a Tactical Intervention Specialist Quick Cuff sling with heavy swivels. Both have been used but in good condition and functional. If you wanted a good sling at a good price here they are.

Rifles Only Bungee Sling- $80obo SPF

TIS Quick Cuff- $45 SPF

Prices are shipped to lower 48. Will take PayPal F&F, Check or money order. PM any questions.

Hi all,

It's been a minute since I've been on this site and after years of the tactical game, I've started down the rabbit hole of scout rifles and "general purpose" rifles. My scout game is covered with both a Steyr Scout and a Ruger GSR and I recently purchased a Tikka T3x Arctic which is a lovely beast. However, I found myself with a left over West German Schmidt & Bender fixed 4x scope that is amazingly bright and sharp and thus the hunt began for a host rifle for this scope.

Last week I picked up a .308 Tikka T3x Lite. 22.4" Stainless, 1:11 twist, synthetic stock, etc. My initial thought is to have it cut back to either 18.5" or 20". I envision this rifle to be a handy "ranch" rifle so to speak. I plan to drop it into a used CTR stock I just bought off eBay so that I have 10 rd. mag compatibility with my Arctic. With a fixed 4x I don't imagine shots over 300-400m. I found a reputable gunsmith in the area who will cut my barrel back, thread and even mount his proprietary muzzle brake (Scott @ Live Oak Accuracy outside of Dallas). However, because the barrel diameter being pretty thin to begin with, he'd have to thread to 1/2x28 instead of the more common 5/8x24 for .308.

So now I'm waffling on which direction to go. Should I simply have it cut? If so...to what length? I'm leaning towards 20" to keep it the same as the Arctic, but 18.5" is kind of the old school "carbine" length.

Do I have it threaded...and then have to live with a very specific muzzle brake (albeit a very effective and well made one)? If this option, I'm thinking 18.5" which would put the finished length at 19.75" or thereabouts. Scott did offer to make a thread adaptor which would allow me to use other muzzle devices, but I'm hesitant to use a can with a thread adaptor. But it does provide options for other muzzle devices, flash hiders, etc.

Then there's the piece about gambling with accuracy. The Tikka is guaranteed MOA...do I risk negatively impacting accuracy by cutting? I have faith in Scott's work and reputation but I tend to follow the "if it ain't broke, don't fix it" approach to life.

So, I'm torn...which direction would you go if faced with this dilemma?

2x Atlas PSR BT46-LW17. Excellent condition.

$250 each shipped.

WILL PIECE OUT!

MDT ACC elite chasis with internal weights
Nightforce ATACR 7-35 Mil XT reticle with MDT 1.25 scope rings and vortex bubble level
Atlas bipod with arca mount
Impact precision action with bolt- 6 dasher barrel chambered by Stuteville precision included for free and I also have a 6 creedmore barrel chambered by same with 100rds through it I will also sell.
Hellfire muzzle break 6mm

Message for prices, more pics, information

Custom Gen 4 Noveske 18 inch SPR Build For Sale *ATACR/Mount sold*

No trades

Price-Rifle only w/o optics or light- $2,500

The build:
•Noveske Gen 4 Upper, Lower, and Handguard with Noveske parts (including black nitride Noveske BCG)
•Centurion Arms MK12 18” Stainless Barrel with polished feed ramps and lo pro pinned gas block.
•Geissele SSAE-X trigger
•Irregular Defense Special K grip and FEER cheek riser
•Radian 45 degree safety
• Noveske H1 buffer/spring
• HUXWRX/OSS Flash Hider


About 400 rounds of Black Hills 77 SMKs through this rifle. Flawless performance. Built by gunsmith. This thing is a tac driver. Easily shoots half MOA, and I’ve taken it out to 870 yards here in TX. I hate to see this rifle go, but I need the cash.

Manners LRH
Rem 700 & Clones Long Action Inlet
Proof Sendero Barrel Channel Inlet
Hawkins M5 Bottom Metal Inlet
Micro Chassis
2 Flush Cups Left Side
1" Pads
13.5" LOP

$1175 SHIPPED FIRM

1 - SOLD
2 - SOLD
3 - SOLD
4 - SOLD
5 - SOLD
6 - SOLD

I am debating a Bergara B14 HMR in 6.5CM for longer range target work and shooting feral hogs out to ~200 yards. Is there a better rifle for similar money? What sort of accuracy am I looking at for farther shots at 400 yards or more? Regarding the feral hogs, I get good results with a 16" AR-15 in 6.8SPC so, I'm expecting with more velocity and better bullets, the 6.5CM from a ~22" barrel will do a good number on a big sow or boar out to 200 yards. Thoughts on the caliber and rifle?

TIA,
Sid

Looking for Gray Ops Xero Qd Mount

Springfield M1A Super Match in .308/7.62x51 NATO. Built by the Glen Nelson custom shop in Feb 1995 (confirmed by Springfield Armory, 087 serial). Excellent condition. I have never removed the action from the bedded stock and I will not do so to further identify parts. Less than 500 rounds fired since I bought it years ago. I no longer compete in High Power competition and I need to move this out of my personal collection to help finance other projects.

Features:

• Heavy Super Match walnut stock
• Rear lugged Springfield match receiver
• TRW USGI bolt
• Douglas heavy match barrel
• .072 National Match Front Sight
• Wright National Match rear sights
• Turner Saddlery Biothane M1907 sling
• One 20rd USGI M14 magazine

Price is $3000 OBO. No trades. Payment via Guntab is strongly preferred and buyer pays 100% of all fees, insurance and actual shipping costs to their FFL. Private transfer possible in the central TX area.

$1150 shipped

Like new; only used a couple times and never in the field.
Comes with box and everything you'd get with it if new. Perfect condition.

No trades, please. Can FaceTime to verify condition.