Accuracy International Picture Thread

[M8541Reaper]

@roberthu526

Mags can undergo a color transition with a $5 can that rattles…or $50 if you’re feelin fancy (cerakote).

 

[5-0 MTB]

AO Vision? Where’s the love for keeping shit stock.

 

[BLKWLFK9]

AO Vision? Where’s the love for keeping shit stock.

Cuz we ball till we fall, nucca.

 

[deersniper]

Ride till we die

 

[5-0 MTB]

What evs. Keep it real lol

You gotta admit the ATLE is hawt.

 

[Krob95]

I mean. Stock is cool I guess

 

[BLKWLFK9]

What evs. Keep it real lol

My AT was FDE too but with a black thumb hole skin. Not great for matches but i did love it that way too.

 

[5-0 MTB]

I mean. Stock is cool I guess

Was wondering how long it would take for @Krob95 to chime in lol

 

[Krob95]

Was wondering how long it would take for @Krob95 to chime in lol

Been busy with work today lol

AO chassis or GTFO

ATLE with the NV bridge is pretty gangster tho!

 

[5-0 MTB]

Been busy with work today lol

AO chassis or GTFO

ATLE with the NV bridge is pretty gangster tho!

Guess I'll have to see @Huskydriver 's AO IRL to fully appreciate it

 

[5-0 MTB]

My AT was FDE too but with a black thumb hole skin. Not great for matches but i did love it that way too.

Yeah, didn't you post pics of it a while back shooting matches?? Looked diff but was still tits

 

[BLKWLFK9]

maybe.. i only shot 1 match with it in the AT chassis. Shot a couple with the AO prototype and thumb hole. Thats probably what youre thinking of.

 

[kydron]

View attachment 7940161AO Vision? Where’s the love for keeping shit stock.

Is this the 16.5” barrel? I’ve got a spare 26” LW barrel I’m thinking of chopping.

 

[Huskydriver]

Is this the 16.5” barrel? I’ve got a spare 26” LW barrel I’m thinking of chopping.

I got a 16. Slow AF.

 

[kydron]

I got a 16. Slow AF.

Yeah I figured it would be, but I have enough 20”+ barrels that I don’t need another one this length. Do you find yourself not shooting it much because it’s so slow?

 

[Huskydriver]

Yeah I figured it would be, but I have enough 20”+ barrels that I don’t need another one this length. Do you find yourself not shooting it much because it’s so slow?

Just depends on what you are trying to do. I can only push 140s about 2500

 

[Defender3]

What's the prob? I see a bunch of center mass kill shots.... I wanna know what poor didn't use ar550?

338LM at 25yds on steel FTW.

 

[Huskydriver]

338LM at 25yds on steel FTW.

A hits a hit am I right?

 

[Defender3]

A hits a hit am I right?

If you say so.

 

[Tex68w]

What evs. Keep it real lol

You gotta admit the ATLE is hawt.

I miss my AT-LE shorty. Still debating what'll be next.

 

[5-0 MTB]

Is this the 16.5” barrel? I’ve got a spare 26” LW barrel I’m thinking of chopping.

Yeah. The 16.5” .308 LW. I’m getting around 2550 in the cold temps and close to 2600 in warmer temps (90degs +) with 168SMK.

 

[5-0 MTB]

I miss my AT-LE shorty. Still debating what'll be next.

Whaaat? You abandoned it or just swap barrels?? You got yours around the same time I got mine

 

[Tex68w]

Whaaat? You abandoned it or just swap barrels?? You got yours around the same time I got mine

Yea I sold it, it went to another member here on the forum. I had plans for an AT-X, I passed my spot on to another with the initial release of those and now I am waiting for the third gen variant before pulling the trigger. While the AT-X has all of the right improvements, it'll never be the looker that is the AT-LE.

 

[Huskydriver]

Yea I sold it, it went to another member here on the forum. I had plans for an AT-X, I passed my spot on to another with the initial release of those and now I am waiting for the third gen variant before pulling the trigger. While the AT-X has all of the right improvements, it'll never be the looker that is the AT-LE.

Ya done messed up... You could have been the only guy for now with a at LE in a ao chassis....

 

[FUNCTIONAL]

Yeah. The 16.5” .308 LW. I’m getting around 2550 in the cold temps and close to 2600 in warmer temps (90degs +) with 168SMK.

16.25" 6.5poopmoor on an AT. Very handy but I've shot a whopping 5 rounds so I can't tell you much.

Edit: 20" for comparison. This is 308 and I get 2558 with 175smk m118lr clone and 2600fps with a 175rdf match load.

 

[CoriolisEffect]

Yeah. The 16.5” .308 LW. I’m getting around 2550 in the cold temps and close to 2600 in warmer temps (90degs +) with 168SMK.

What 308 load is going that speed from a 16.5?

 

[D̷e̷v̷i̷l̷D̷o̷c̷A̷Z̷]

16.25" 6.5poopmoor on an AT. Very handy but I've shot a whopping 5 rounds so I can't tell you much.
View attachment 7941035View attachment 7941036


Edit: 20" for comparison. This is 308 and I get 2558 with 175smk m118lr clone and 2600fps with a 175rdf match load.
View attachment 7941045

Baller.

I just switch barrels, like a poor.

 

[FUNCTIONAL]

Baller.

I just switch barrels, like a poor.

Oh I'm not, just got bored waiting to go to the range and painted a second set of skins inbetween photo shoots.

What 308 load is going that speed from a 16.5?

Edited because I'm an idiot. My 16" is a 6.5creedmoor, my 308 is a 20"

 

[5-0 MTB]

What 308 load is going that speed from a 16.5?

Our elevation helps. Shooting around 5000+ elevation. Lapua Palma (srp). I was getting 2650 with 45.6 Varget no pressure signs homie. Backed it down to a more accurate node. 2600 is average now. Done over labradar. So it’s probably off by 300 fps lol

 

[Tex68w]

What 308 load is going that speed from a 16.5?

I am at sea level and usually shooting in winds 10-20mph. My software tells me to expect around 1000fps at 1000yds. With 168FGMM I chrono'd 2442fps at the muzzle with the 16.5" barrel. I made repeated hits (50-60%) at 1000yds with this setup with 15-18mph winds but they were almost head on and pretty steady/clean. 700-800yds plus with any .308 starts to become more of a crap shoot. I shot a three day class with a 20" barrel and 175FGMM and as expected the numbers were better.

For myself, the short barrel was simply to have a more compact setup (and it looks cool), I rarely shoot .308 beyond 500yds as it is. 6CM takes over for 500-1000yds and then I go up from there if shooting beyond 1000yds.

 

[The Durk]

I think I need to rattle can my new R30 suppressor. It doesn’t look right in gray.

 

[hafejd30]

I think I need to rattle can my new R30 suppressor. It doesn’t look right in gray.

View attachment 7941945

That’s the way the AI was meant to be

 

[Hennig]

Tacked together to decide on a scheme - pretty cool.

 

[96C]

@FUNCTIONAL Hey man, question - why do you have your scope rings set up so close together?? With the rear, obstructing the ejection port, do you get any brass extraction stoppages from that?

Not digging, just curious.

 

[Kopfjager1]

Well, he has the rear ring in the center of the rear mounting area (cant go much further back because of the illuminator knob), and the rings are not protruding anymore than any other unimount.

 

[Mareshow]

Just got my 308, Considering doing some mods just not sure what yet. Going to shoot it and enjoy it for a bit before I change anything I think.

 

[Rhed]

axsa 26” 1-10
155 smk Palma #2156
.308 Peterson srp case
47.0 gr Varget
cci #450 srp
5 shot group

Had some time to finalize my reload. I’m pretty much done and just stick to this recipe.Don’t wanna waste anymore powders. Seems like no matter what reloads I throw at this ax, it just shoots dead nuts anyways.Time to stretch it.

 

[Defender3]

axsa 26” 1-10
155 smk Palma #2156
.308 Peterson srp case
47.0 gr Varget
cci #450 srp
5 shot group
View attachment 7942257View attachment 7942258
Had some time to finalize my reload. I’m pretty much done and just stick to this recipe.Don’t wanna waste anymore powders. Seems like no matter what reloads I throw at this ax, it just shoots dead nuts anyways.Time to stretch it.

Nice shootin'

Any pressure signs with that load?

 

[CoriolisEffect]

View attachment 7941045

Which clamp do you have on that Atlas?

 

[deersniper]

Which clamp do you have on that Atlas?

Looks like the 2 screw model that can be bought at a discount used

 

[Rhed]

Nice shootin'

Any pressure signs with that load?

No ejector marks, very slight flatten primer. Bolt lift is still butterly smooth shot after shot. I’ll post a picture of the batch later today.

 

[96C]

Well, he has the rear ring in the center of the rear mounting area (cant go much further back because of the illuminator knob), and the rings are not protruding anymore than any other unimount.

I didn’t see the Illuminator at the back there, makes sense.

 

[MysizeisMAGNUM]

I didn’t see the Illuminator at the back there, makes sense.

Those damn 3-20’s didn’t leave much room. Made for the 1 piece. Great optic tho, next to my TT that was my favorite scope.

 

[FUNCTIONAL]

Yup, all the answers are right. Illumination knob forces the rear ring forward. Normally I'd have the ring centered if not slightly more rear of center on normal scopes. No issues with brass at all.

The atlas is just the 2 screw version. Sounds stupid but it keeps the bipod up the highest and I don't have a need for a QD.

3-20 is a fantastic scope... but the 3-12x50 is still my standard everything else is measured to.

 

[CoriolisEffect]

Any suggestions on where to send a factory AT non-threaded barrel to have it threaded?

 

[Huskydriver]

Any suggestions on where to send a factory AT non-threaded barrel to have it threaded?

Sawtooth or bugholes

 

[hafejd30]

Elite Sand / Dark Earth mix from Mountic Outdoors View attachment 7942688View attachment 7942689View attachment 7942690

 

[M8541Reaper]

Elite Sand / Dark Earth mix from Mountic Outdoors View attachment 7942688View attachment 7942689View attachment 7942690

Is that mat an old Eagle HSRC?

 

[Krob95]

The 22GT got it done today. Best match I've shot so far and in a nice light 20mph breeze. 7th out of 44, I'll take it!

Ignore them curbed ass wheels, it was like that when I bought the truck

 

[FUNCTIONAL]

Ignore them curbed ass wheels, it was like that when I bought the truck

Trying to hide the fact that you are really a woman?