Accuracy International Picture Thread

Huskydriver

Not here for a long time but here for a good time
Full Member
Minuteman
Apr 17, 2018
6,473
12,129
SLC, Utah

Vision chassis > atx all day.....

Also...red bartlines chambered by wintac > any gold barrel

20220806_194639.jpg


20220806_194658.jpg
 

Hennig

Sergeant
Full Member
Minuteman
Sep 28, 2011
745
1,151
34
QLD, Australia
www.instagram.com
The colors dont even match! 😂

In all seriousness, I couldnt decide whether to do the AO on the AT or AX, and chose the AX…

But I can see doing an AO on the thumbhole AT in the next 12mo too…
 
  • Like
Reactions: RS14

Rhed

Sergeant of the Hide
Full Member
Minuteman
Apr 12, 2018
377
291
8D05EDF0-A48F-492D-80C3-B4D9F1869361.jpeg

5 shot group, no pressure signs

Fire forming only with new brass. Load development to follow.

2021 ES 26” 1-10 .308 AXSA
155 gr smk Palma (#2156)
.308 SRP Peterson case
46.4 gr Varget
#cci 450 srp
2860 fps average
 

carbonbased

Tasco blister pack
Supporter
Full Member
Minuteman
Supporter+
  • Jul 26, 2018
    1,616
    2,004
    Minnesota
    Sounds like he doesn't have to mow then, just blow the leaves into his neighbor's yard, leaving more time for shooting, reloading or general fucking about... Seems like a no-brainer to me!
    Leaves? Those are not HIS leaves, I’ll bet. I’m sure he has giant Lego trees.
     
    Last edited:
    • Haha
    Reactions: tex68w and Whaburt

    BCX

    5 Star PumpMaster
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Mar 18, 2018
    2,533
    1,414
    Who makes the best single shot sled for AXSR?
     

    Dave62677

    Skeletor
    Supporter
    Full Member
    Minuteman
    May 4, 2013
    608
    336
    I just shot my 33xc on my AXMC over the pass weekend. I pierced few primer even at low node. The range master who also a gunsmith suggested me send my bolt with firing pin to LRI for bushing. He told me a lot of AI with large firing pin having this issue.
     
    • Like
    Reactions: BCX

    BCX

    5 Star PumpMaster
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Mar 18, 2018
    2,533
    1,414
    I have been shooting a ton of 338 LM hand loads in my AXSR this year, knock on wood…. no pierced primers. I think I read somewhere that the AXSR bolt is already bushed? Or SFP?
     
    Last edited:
    • Haha
    Reactions: Huskydriver

    BCX

    5 Star PumpMaster
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Mar 18, 2018
    2,533
    1,414
    I have to say all my custom rifles have not seen range time this year 🤣🤣
     

    Dave62677

    Skeletor
    Supporter
    Full Member
    Minuteman
    May 4, 2013
    608
    336
    I have been shooting a ton of 338 LM hand loads in my AXSR this year, knock on wood…. no pierced primers. I think I read somewhere that the AXSR bolt is already bushed?
    I believe I read the same info on SH as well.
     

    BCX

    5 Star PumpMaster
    Supporter
    Full Member
    Minuteman
    Supporter+
  • Mar 18, 2018
    2,533
    1,414
    I’m sure one of the AI experts will chime in…
     

    Fixr

    Sergeant
    Full Member
    Minuteman
    Nov 13, 2011
    412
    612
    Northern Virginia
    Spun the 33xc barrel on and realized I never purchased a single shot sled 🤣. View attachment 7929562

    I'm not familiar with that cartridge, but if that rifle uses a standard AXMC 338LM mag you could print one. If you don't have the capability I could print one for you.
    Spun the 33xc barrel on and realized I never purchased a single shot sled 🤣. View attachment 7929562

    I'm not familiar with that cartridge, but if the rifle uses a standard AXMC 338LM mag, and you have the capability you could print an insert. I can send you an STI file.

    Screen Shot 2022-08-08 at 19.10.59.png
    20220808_183922.jpg
    20220808_183907.jpg
     

    MOUNTIC

    Mountic Outdoors: Big Game Hunter
    Supporter
    Commercial Supporter
    Full Member
    Minuteman
    Supporter+
  • Apr 29, 2017
    4,401
    3,098
    Colorado
    MounticOutdoors.com
    I just shot my 33xc on my AXMC over the pass weekend. I pierced few primer even at low node. The range master who also a gunsmith suggested me send my bolt with firing pin to LRI for bushing. He told me a lot of AI with large firing pin having this issue.
    This is the way unless you want to buy SFP bolt bodies and the 1.6mm firing pin assembly. Just make sure to send in all the LFP bolt bodies you have at the same time. If you go this route and buy a bolt body down the road for 308 just say, make sure you buy the SFP bolt body as your firing pin assembly is already turned down.


    I have been shooting a ton of 338 LM hand loads in my AXSR this year, knock on wood…. no pierced primers. I think I read somewhere that the AXSR bolt is already bushed?
    The AXSR has the 1.6mm (small) firing pins and bolts from the factory. No need to do anything.
     

    AK74U

    Sergeant of the Hide
    Full Member
    Minuteman
    Jan 5, 2021
    314
    89
    Atlanta
    After YEARS & YEARS of dreaming, it has finally come to fruition!! AI AXSA 6.5CM!!
     

    Attachments

    • IMG_20220607_223252_01.jpg
      IMG_20220607_223252_01.jpg
      174 KB · Views: 70
    • IMG_20220607_223252_02.jpg
      IMG_20220607_223252_02.jpg
      231.3 KB · Views: 68
    • IMG_20220607_223252_03.jpg
      IMG_20220607_223252_03.jpg
      225.9 KB · Views: 68
    • IMG_20220607_223252_04.jpg
      IMG_20220607_223252_04.jpg
      270.8 KB · Views: 72
    • IMG_20220607_223252_05.jpg
      IMG_20220607_223252_05.jpg
      232.3 KB · Views: 95
    • 20220607_222550.jpg
      20220607_222550.jpg
      327.6 KB · Views: 104
    • 20220607_222506.jpg
      20220607_222506.jpg
      348.3 KB · Views: 107
    • 20220607_222750.jpg
      20220607_222750.jpg
      188 KB · Views: 85

    roberthu526

    Sergeant of the Hide
    Full Member
    Minuteman
    Mar 11, 2020
    137
    62
    Quick question on barrel swap on an AXSA: to change from 308 to 6.5CM, do I only need a new barrel or do I have to do something about the bolt too?