Tacked together to decide on a scheme - pretty cool.
Nice shootin'axsa 26” 1-10
155 smk Palma #2156
.308 Peterson srp case
47.0 gr Varget
cci #450 srp
5 shot group
View attachment 7942257View attachment 7942258
Had some time to finalize my reload. I’m pretty much done and just stick to this recipe.Don’t wanna waste anymore powders. Seems like no matter what reloads I throw at this ax, it just shoots dead nuts anyways.Time to stretch it.
Looks like the 2 screw model that can be bought at a discount usedWhich clamp do you have on that Atlas?
No ejector marks, very slight flatten primer. Bolt lift is still butterly smooth shot after shot. I’ll post a picture of the batch later today.Nice shootin'
Any pressure signs with that load?
I didn’t see the Illuminator at the back there, makes sense.Well, he has the rear ring in the center of the rear mounting area (cant go much further back because of the illuminator knob), and the rings are not protruding anymore than any other unimount.
Those damn 3-20’s didn’t leave much room. Made for the 1 piece. Great optic tho, next to my TT that was my favorite scope.I didn’t see the Illuminator at the back there, makes sense.
Any suggestions on where to send a factory AT non-threaded barrel to have it threaded?
Elite Sand / Dark Earth mix from Mountic Outdoors View attachment 7942688View attachment 7942689View attachment 7942690
Is that mat an old Eagle HSRC?Elite Sand / Dark Earth mix from Mountic Outdoors View attachment 7942688View attachment 7942689View attachment 7942690
Trying to hide the fact that you are really a woman?Ignore them curbed ass wheels, it was like that when I bought the truck
I wear my hair up, and have curbed wheels, it's not looking good man. If only I wore lululemonTrying to hide the fact that you are really a woman?
I wear my hair up, and have curbed wheels, it's not looking good man. If only I wore lululemon
I'm hoping you mean where tf the gold barrel is. And to that I have to say, it is in my living room, waiting for me to rework the load. Dropping the speed 100fps lolI mean ...wtf is the gold barrel....
I'm hoping you mean where tf the gold barrel is. And to that I have to say, it is in my living room, waiting for me to rework the load. Dropping the speed 100fps lol
There is another saying that goes likeDumb poor people do that as well as rich people who don’t give a crap (because they don’t have to care/$$$ to ).
There is a saying that states the only people who can afford to buy cheap stuff are rich people.
Because when the cheap item inevitably soon breaks, it’s no big deal to rich folks. Toss it and buy another.
A few caveats:
- the truth of this saying hinges upon the meaning of the word “afford”
- as mentioned, poor dumb people exist
- this saying has little to do with tightwads who look for deals on authentic AI mags
Yes, I agree. That’s axiomatic from my turn of phrase, or in other words, another way to say the same thing.There is another saying that goes like
"I am not rich enough to buy cheap equipment"
I got one of those. Really easy to fine tune elevation.Trying an adjustable bag rider on the 300PRC. The slope of the firing lanes at Quantico always has me grabbing a second bag or trying to mash down a larger bag. Hopefully this will help as you can get an inch or so of adjustment.
Nice shooting. That velocity seems a little high?axsa 26” 1-10
155 smk Palma #2156
.308 Peterson srp case
47.0 gr Varget
cci #450 srp
5 shot group
Had some time to finalize my reload. I’m pretty much done and just stick to this recipe.Don’t wanna waste anymore powders. Seems like no matter what reloads I throw at this ax, it just shoots dead nuts anyways.Time to stretch it.
Nah.. 2900 fps and up is key with the #2156. Is completely different design from the old #2155. Those Palma guys get it going to 3000 fps and up, though with a 30” stick. Key for the 2156 is, these bullet likes to jump. Mines is 8 thou off lands. Best to go with .308 cases with srp pockets ( there’s lots of info on this as to why ). And I don’t know if it makes a difference, but I like to use srp magnum primer for this. And I went with 3 thou of neck tension. With a kiss of taper crimp. Using Reddings taper crimp die.Nice shooting. That velocity seems a little high?
Gross . A vortex??Taking out the trash. I can’t believe I used to shoot this tranny Remington in a chassis. Sure it identifies as an AI and shoots sub MOA but that tranny rifle had to go.
View attachment 7945360
Strike Eagles.Oh god you arent gonna be happy when I put Razors on my AT and AX
Bro if you’re going that low, get the effing Quig-Ford. Status quoStrike Eagles? Gross. Tasco or gtfo
I regret getting a tangent when I could've bought 50 tascos for the same price and they're just as good if not gooder
Bow Kill and Bench Press stats, multiple years "in Concrete" REQUIRED...!Bro if you’re going that low, get the effing Quig-Ford. Status quo
You obliviously don't know....Why the jab at concrete?
Eff… I’m outBow Kill and Bench Press stats, multiple years "in Concrete" REQUIRED...!
I'll save ya some reading...Enlighten me
"28 yrs of concrete and over 200 bow kills and I bench 275. So fuck you bitches hiding beside your computer"...Reading it now,,, always thought the Quigley Ford was a joke., see I learned something new today