He doesn’t want an AI he just wanted an excuse to post his videos and try and get their views up
He’s still watching every day waiting for his ban to end…
Please don't tell me he has a youtube channel teaching people how to be a 374th ranked PRS shooter.
Guys, I think there might be a bit of a language barrier here. Might wanna just lay off, and give the guy a break.
I don't normally do this but I really feel like they deserve it. We mention them here but Sporting Services UK is excellent. Marked a "notify me" button on the below muzzle device, something I've been trying y track down for quite a while to get more of a "classic" AI look. Clicked the notify before I feel asleep and when I woke up I already had an email asking if I was interested in the threaded vs non threaded version. Told him my preference and within a day he must have found 2 in the back and sent me a link to purchase them directly. They list 1 in stock now if you are interested.... they are about $200 shipped.
Anyway, it's not often I find that service (never actually) just from a stock notify my button and felt it deserved the attention. Got a Lothar Walther barrel I won in medium palma that will make a nice pairing with this.
Anyway, it's not often I find that service (never actually) just from a stock notify my button and felt it deserved the attention. Got a Lothar Walther barrel I won in medium palma that will make a nice pairing with this.
I have 2 or 3 of those sitting in a box. The one they have is the older style single chamber.......I have issues I know.....
My cousin just got an AT-X so obviously I had to fly down to Altus and shoot his first shots with him.
And here's a shot with a AO'd AX from a recent match for good measure
And here's a shot with a AO'd AX from a recent match for good measure
I picked up a pretty old AX 338 off GB while back. The barrel is threaded in M18X1.5 which I think they quit doing back around 07. Finally made some ammo for it and going to test it this weekend, but thought I'd share a picture. Don't hate on the cantilever mount please - I didn't know what I was doing at first
Also, I think I’ll just cancel my gym membership and bicep curl the rifle from here on out.
Also, I think I’ll just cancel my gym membership and bicep curl the rifle from here on out.
Attachments
Last edited:
What’d you pay ? I want to get one real cheap and put a 300nm barrel on it
$6,200 for rifle. It doesn’t have a scratch on it and seems like it was never even fired. Idk why guys buy guns and let them sit in their safe for twenty years unfired. The bolt doesn’t have a mark on it.
Way outta ole Burt's price league lol
Accuracy International really needs to bring back legacy options. These are CONSISTENT sellers. I have emailed both sides of the pond on this matter to no avail. Makes me think they are HK-ish in NOT wanting to make money on obvious areas of civilian demand...
Accuracy International Chassis System 2.0 Folder For Remington Long Action | eBay
Find many great new & used options and get the best deals for Accuracy International Chassis System 2.0 Folder For Remington Long Action at the best online prices at eBay! Free shipping for many products!
www.ebay.com
Last edited:
Should be 10 easy. Might want to check if the spring is binding in anyway. I had that happen when I took mine apart to repaint it.
Yea that binding spring at the bottom got me too when I took em apart to clean the first time.
Pulled it apart and reassembled and then fully depressed the spring and follower and that helped. Must have been a strange binding issue. Even still the 10th rd is hard to load but its a fresh mag so we will see. I really can't wait to get my axmc adapter installed into this sr so I can go back to my 12+14rd mags.
Are you referencing the axmc mag adapter that locks into the axmc mag well for old type 308 mags? I didn’t think that would fit the axsr, the new style 308 sr mags have a built in spacer to replace that.
Please no! Not until they can fulfill all my back orders and watch list for bolts and bits for their current stuff.Accuracy International really needs to bring back legacy options. These are CONSISTENT sellers. I have emailed both sides of the pond on this matter to no avail. Makes me think they are HK-ish in NOT wanting to make money on obvious areas of civilian demand...
Accuracy International Chassis System 2.0 Folder For Remington Long Action | eBay
Find many great new & used options and get the best deals for Accuracy International Chassis System 2.0 Folder For Remington Long Action at the best online prices at eBay! Free shipping for many products!www.ebay.com
Looks like my AI is getting a new paint job while I impatiently wait for a scope mount to arrive.
Any thoughts on a color scheme? I was thinking hot pink and some gold glitter.
Any thoughts on a color scheme? I was thinking hot pink and some gold glitter.
My Little Pony and Hello Kitty always impresses the chicks. And some ghost flames in there just because.
New glass/mount showed up.
Waiting on the Elite Iron spigot and we’re back in business.
I have that adapter and I am going to drill the hole that the MC has in the side of the chassis into mine so the adapter will lock in. If you dig back through a few of my posts in this thread I believe I posted a pic of that magwell adapter in this gun.
How often are you guys changing barrels with your AI rifles?
Are you getting the accuracy and precision that I get with mine!?
Barrel Swap Clip
Are you getting the accuracy and precision that I get with mine!?
Barrel Swap Clip
It’s 2023 my 16” 308 identifies as a 26” 6.5cM
The AXSR switches most times it goes out. -0.4 MIL between the 300PRC & 308, the 6.5CM is -1.2 MIL but they’re all very repeatable.
The AT-X lives as a 6BR, I won’t take that barrel off until it’s cactus.
I had the same request. Talked to Matt at SawtoothRifles.com about three weeks ago and he said he is making a small run of this very option. I need to follow-up. Maybe we can let him know there is more than a few of us who want this option. His prices are very reasonable.
Some other guy on eBay is selling something similar for AIAX but it does go beyond the end. Maybe he can do it also for the AIAT if Matt is busy and make it so it does not extend beyond the end: https://www.ebay.com/itm/264663161939
Last edited:
Mike @ MHA is one of the best, most experienced gunsmiths in the world. Can’t say enough good stuff about that guy. If you can wait a decade his 1911s are absolutely phenomenal.
Trust me, I was thinking of it. My hacksaw skills are “other world”…
