Spuhr is over rated. Prove me wrong
Price Cracked mounting plates Causes some scopes to lock up the magnification ring. Rare reports of cracked ring top halves. Buy a set of NightForce. More durable and almost as many Mount options for rails red dots etc. and cheaper.
www.snipershide.com If they want to keep having broken mount clamps , broken ring halves , mounts that mess up scopes parallax etc.
That’s on them
Some people ya just can’t help
ZCO mount ftw.
NF mounts are also acceptable. Where applicable
Yeah you are right.
I saw the hex nuts and thought NF.
Is this NF mount considered acceptable?Spuhr is over rated. Prove me wrong
Price Cracked mounting plates Causes some scopes to lock up the magnification ring. Rare reports of cracked ring top halves. Buy a set of NightForce. More durable and almost as many Mount options for rails red dots etc. and cheaper.
If they want to keep having broken mount clamps , broken ring halves , mounts that mess up scopes parallax etc.
That’s on them
Some people ya just can’t help
View attachment 8188569
ZCO mount ftw.
NF mounts are also acceptable. Where applicable
NF UltraMount is the only acceptable mount.
#TheOnlyGoodMountIsAnUltraMount
#ImDoingMyPart
#UltraMountsGuaranteeCitizenship
#WouldYouLikeToKnowMore
No supressor? Doesn't look like a Holiday Inn either ...
#unacceptable
#bushleague
Last edited:
1. I shot the last match without it. Ended up top Tac and 7th out of 62.
so while savage, it was acceptable. …except when I broke the seal on my sordins. 2. That’s a holiday inn express ma’am.
#PinkiesLikeLacesAreOut
#TinnitusIsACruelMistress
1. I shot the last match without it. Ended up top Tac and 7th out of 62.
2. That’s a holiday inn express ma’am.
#PinkiesLikeLacesAreOut
#TinnitusIsACruelMistress
Probably the only tac at the match. Lets get real here.
Hahahaha excuse me ma’am, but there were 5 of us
. I should have also identified as female cause there were none. #AWinIsAWinMaam
Well, not a bad culmination after months of waiting. New TT735 and SR delivered within a couple days of each other.
First time with hands on this thing and it is immediately apparent that it’s playing in a different league than the AT-X.
Now, to start the barrel collection…
First time with hands on this thing and it is immediately apparent that it’s playing in a different league than the AT-X.
Now, to start the barrel collection…
At first glance that looked like something from a pirate movie with the octopus arm on left and pirate on the right
I’d argue 2 separate rings would offer more support for the scope. Versus a cantilever mount made for an AR
Shit a mag mount would be the best option
Shit man, 42 posts in your first 24 hours or so. Save some pussy for the rest of us.
I’m just trying to share knowledge gained through actual use and experience.
Seems most of your membership is lacking that.
Sir, we already have the #382 ranked guy in competition telling us how we do it all wrong.
We don't need the #383 ranked guy too.
Way to shoot insults at people trying to help you
I shoot an AI. If I was ranked it would be much higher than 300
A lot of AI shooters where I come from.
Just picked this up cause holding wind is for posers
Last edited:
Im trying to decide if burt has a new sockpuppet or if this is someone else
Sounds more like DbD 2.0.
Most of your posts are quite subjective and I would lean towards garbage and useless posts. This leads me to believe you're trying to increase your post count to seem more trustworthy to an unsuspecting person to scam them, or you honestly do not actually have a lot of experience and are over-compensating. Either way, of the 42 posts, there were maybe 2 "constructive" posts, the rest were attacking other members and degrading their purchases.
I get it, we all joke about "the poors" (not just the AI thread), but your unsolicited advice it just that, unsolicited.
Also, you can quote multiple posts at the same time and not reply individually just to increase your post count. Food for thought.
I’ll see your rings and raise you double UltraMounts.
I know Mr. Burt is taking a vaca rn, but what exactly is he referring to here?
It is ironic how Burt gets banned. At the same time we’re graced with a brand new guy who definitely knows his way around the site
It could be DBD. He has said how he shoots with many AI shooters in the past. However he would already be offering up secrets to achieving prs greatness from a room likely littered with participation trophies
But it can’t be DBD cause they’re currently sharing cutting edge knowledge in the mount an AR to your mower thread
Last edited:
I agree it’s time for an upgrade. I’ve had this tripod since before RRS or all the new carbon fiber tripods even existed
There’s a write up in the armory about how much more stable RRS are. Is the reason I said that
If I didn’t already have RRS, I’d buy this
SOLD - WTS-PVA Tripod with RRS Anvil
WTS - PVA Comp-40 tripod with RRS bowl Anvil. This setup is heavily used, matches, rain, etc, and shows. Not splitting the tripod and head. Sold
www.snipershide.com I bet if you offer $450 he will counter at $500
Hell of a deal but I need to stop accumulating
Here’s the post with the long post about accuracy improvement
Tripods and accuracy
Sorry if this has been asked before, but I couldn’t immediately find an answer. I’ve got a solid tripod for my spotting scope and have seen plenty of PRS type shooting from tripods. Considering an RRS anvil 30 and ARCA mount for a bolt action. Presuming good fundamentals and plenty of...
www.snipershide.com Last edited:
Brand new Glowie. Insulting of most members in general, and Jews in particular.
Been out of pocket for the last couple of weeks... Holy shit this dude's annoying!
#JustHappyToBeBack
#JustHappyToBeBack
that is 3 minutes I’ll never get back.
Email ai na, they’ll send you the right one. Seems like they do that on every kit for some reason.
They pretty quick about it? Or your typical 1 to 2 days before a response.
I would measure what size you need and order from
www.sportingservices.co.uk
or McMaster Carr would have them too.
That's what I did when I was missing 1 bolt for my AW skin.
Sporting Services UK takes about a week to get in. I just had to order several other small parts from them last week.
Accuracy International - M6 Screws
For butt spacers. Available in various lengths to accommodate different spacer configurations (example configurations shown). Price is per screw. Self colour black finish. * Longer screws may not have full length thread.
www.sportingservices.co.uk or McMaster Carr would have them too.
That's what I did when I was missing 1 bolt for my AW skin.
Sporting Services UK takes about a week to get in. I just had to order several other small parts from them last week.
I can’t honestly remember but I feel like it was pretty quick, at least it doesn’t stand out in my mind as a negative experience. Guess you could always call them too.
Or just trim it and if you ever want to go back to the old skins just let this be future you's problem?
I think thats what I'm gonna do. Got a hack saw and a disc sander I'll fix it real quick. It's a 25 cent bolt.
This week I took delivery of a Maven RS.4
I know i'll be called a hethen because its not S&B, NF or ZCO
but ive got it on loan and I must say I'm rather impressed given its price point and compactness.
I'll be into a AO/Vision Chassis soon 
I know i'll be called a hethen because its not S&B, NF or ZCO
but ive got it on loan and I must say I'm rather impressed given its price point and compactness. I'll be into a AO/Vision Chassis soon 
The last two months have been a lot of work moving from Las Vegas to Dallas, but i'm getting settled in and finally got my AT out of it's burrow for the first time since being here. lol
Pleasure meeting you today, hope the qual went well for you!
I've got an odd noise that the camera picks up after every shot with my AI? Anyone know what it is?
Right back at you! Ill see you out there next time.
That would be the target moaning when you nail it... Get used to it, that's normal.
I concur. He hit the spot between the F & H.
Cry for help to my UK peers - I'm looking to convert an AI coopermatch Palma-Master to take a magazine and need a AI short action chassis to put it into, I know the Accuracy obsession Vision chassis would work but at £1800 that's a bit rich for my blood. Any short action should be compatible AW, AT, or ATX I'm told.
I'm hoping someone has a line on one or perhaps has one left over from a Vision upgrade they'd be willing to let go of.
I've spoken to Valkyrie Rifles, JR firearms, Bradley Arms, Sporting services, who can't help, as well as Dolphin, and R and F sporting supplies about a custom chassis without success.
I'm hoping someone has a line on one or perhaps has one left over from a Vision upgrade they'd be willing to let go of.
I've spoken to Valkyrie Rifles, JR firearms, Bradley Arms, Sporting services, who can't help, as well as Dolphin, and R and F sporting supplies about a custom chassis without success.
Does this action have the same footprint as the AT/AW/AX308? If so, and you know it’ll fit the current chassis design, your best bet is probably a WTB ad in the PX to see if you can find someone in the UK who has converted to the AO/V chassis and has the old AI chassis laying around.
There have been quite a few over the past years from people who have upgraded, but I’m not sure on the ability to ship a chassis from the US to the UK without an importer.
