Official (DTA) SRS, HTI, Covert, Hunter Thread

[malJohann]

some customers get them turned down to 5/8x24, others bought adapters from Delta P

One looks better, the other is cheaper. Though I could get it turned down to 5/8x24, and if I ever wanted to run the OEM brake again, just add a 5/8x24 to 3/4x24 thread adapter like this.

5/8″ x 24 to 3/4″ x 24 Barrel Thread Adapter Black # 4059 – Down Range Products Company

www.downrangeproductsco.com

I’d prefer shoulderless, but what can one do?

 

[Jeff Gahler]

Suppose I could do something goofy and buy an adapter?

Thread Adapter 3/4×24 RH to 5/8×24 – Silencer Central

Thread Adapter 3/4×24 RH to 5/8…

www.silencercentral.com

I have one Il give you a deal on. I used it with awesome accuracy on my DTA 6.5 barrel till I changed cans now I use a brake that fits the DTA thread

Works awesome

Let me know Il get pics tonight

I have the delta p

Pics

 

[fancygunz]

Does your barrel have a fluted barrel shank? A2 covert barrels are also fluted where the older A1 covert barrels were not fluted, if I am remembering correctly. It’s been a minute since we’ve had A1 conversion kits at the shop.

You may have gotten an a2 chassis, but an A1 conversion kit. The A1 kit works just fine in the A2 and vice versa.

My barrel is fluted, exactly like the photo below. I seem to have a setup that is not acknowledged by DT. I have an SRS A2 covert with A2 barrel and 3/4x24 threads. DT says it's not possible, but tell that to my 3/4x24 to 5/8×24 adapter I have to run.

/edit Like right now I’m assuming my barrel thread is actually 3/4x24 and I’ve been had by incorrect published DT specs.

#metoo

 

[PRDRIVER]

My barrel is fluted, exactly like the photo below. I seem to have a setup that is not acknowledged by DT. I have an SRS A2 covert with A2 barrel and 3/4x24 threads. DT says it's not possible, but tell that to my 3/4x24 to 5/8×24 adapter I have to run.

#metoo

We’ve sold lots of DT rifles and I don’t recall ever seeing a barrel with the A2 flutes that had 3/4x24 threads that wasn’t .338. Learn something new everyday.

 

[wooferocau]

Just for interest...

My factory DT 375CT barrel at 1300rnds......still shooting 1/4 moa !!!!!!

 

[st1650]

Anyone running a 6 Dasher or 22 Dasher and feeding successfully ? I have a modified magazine for my 450 BM to reduce the coal so I think it should feed but not sure due to the taper of the cartridge.

What about 22Br/6BR ?

 

[spamassassin]

Anyone know where one might acquire molle compatible mag pouches for the 8rd and 10rd mags? Ideally they'd have some kind of positive retention feature. My google foo has not been able to find the droids I'm looking for.

 

[Ogbybay]

Anyone know where one might acquire molle compatible mag pouches for the 8rd and 10rd mags? Ideally they'd have some kind of positive retention feature. My google foo has not been able to find the droids I'm looking for.

Excellent gear! I’ve bought the bolt, mag and barrel bags. All GTG.


https://www.snipershide.com/shooting/threads/dt-magazine-pouches.6992321/

 

[spamassassin]

Excellent gear! I’ve bought the bolt, mag and barrel bags. All GTG.


https://www.snipershide.com/shooting/threads/dt-magazine-pouches.6992321/

Not all heroes wear capes.

 

[malJohann]

I’ve searched and didn’t find anything.

Does anyone know whether there’ll be a .277 Fury barrel for the SRS?

Uses the same bolt face as .308 Win, and if the SRS barrel extension can handle .338 at normal pressures, .277 at 80k PSI should be just fine?

Looking at this picture (from gunsamerica.com), we should be able to rebore a 6.5 Creedmoor barrel chamber to fit the .277 Fury.

6.5 Creedmoor / .277 SIG Fury / .308 Winchester

 

[Dogtown]

I wouldn’t expect one from DT, but if components become available and someone has a reamer made, I don’t see why not? Maybe there’s some modifications required for the bolt to handle higher than normal pressures?

 

[st1650]

The SRS bolt can already take a lot of pressure as proven by PR’s testing.

 

[Dogtown]

Anyone shooting 33/37XC in their SRS? I’m curious your thoughts? Is it too long to mag feed?

I think my latest set of .338LM Improved 40 barrels may be my last, and I’m thinking of moving up to an XC next.

 

[malJohann]

Anywhere shooting 33/37XC in their SRS? I’m curious your thoughts? Is it too long to mag feed?

I think my latest set of .338LM Improved 40 barrels may be my last, and I’m thinking of moving up to an XC next.

@flims

 

[232593]

Just picked up the .416... Items mounted... Very Happy..

View attachment 8161085

View attachment 8161086
View attachment 8161087
View attachment 8161088

How is it shooting? What projectile are you using?

 

[spamassassin]

Re: 277 Fury

As soon as someone decides to pay for one to be made, they (where they is any one person with the needed tooling and a desire to help someone else experience what short throat life means) will make them. There's unlikely to be any in stock anywhere if for no other reason than DT barrels not made by DT are pretty much one-off custom items out of the gate anyway.

 

[PRDRIVER]

Anyone shooting 33/37XC in their SRS? I’m curious your thoughts? Is it too long to mag feed?

I think my latest set of .338LM Improved 40 barrels may be my last, and I’m thinking of moving up to an XC next.

We've done some for customers. Too long to mag feed. I'd recommend going heavy on the barrel profile to add some weight as there's a good amount of recoil especially on the 37 XC.

 

[canezach]

Guys, I need a bit of assistance. I was shooting a field match and decided to use my 25 PRC barrel (I have an A1 chassis). The issue I ran into is I didn't think ahead when ordering the barrel. I went with a straight 1.045" barrel, but I didn't think about the QD from my sling. When I tried to attach the QD, I found I didn't have enough clearance between the handguard and the barrel, so the tip of my QD was touching the barrel. Since I don't have an MLOK fore end, like the A2, is there another way of adding a QD point somewhere?

 

[malJohann]

Guys, I need a bit of assistance. I was shooting a field match and decided to use my 25 PRC barrel (I have an A1 chassis). The issue I ran into is I didn't think ahead when ordering the barrel. I went with a straight 1.045" barrel, but I didn't think about the QD from my sling. When I tried to attach the QD, I found I didn't have enough clearance between the handguard and the barrel, so the tip of my QD was touching the barrel. Since I don't have an MLOK fore end, like the A2, is there another way of adding a QD point somewhere?

Search “keymod qd” in google, there are many options. You can search “picatinny qd” too.

 

[PRDRIVER]

I’ve searched and didn’t find anything.

Does anyone know whether there’ll be a .277 Fury barrel for the SRS?

Uses the same bolt face as .308 Win, and if the SRS barrel extension can handle .338 at normal pressures, .277 at 80k PSI should be just fine?

Looking at this picture (from gunsamerica.com), we should be able to rebore a 6.5 Creedmoor barrel chamber to fit the .277 Fury.

View attachment 8198781
6.5 Creedmoor / .277 SIG Fury / .308 Winchester

I doubt we'd ever see one from DT. I'm sure someone will do it at some point. Curious as to what barrel life is like pushing that sort of pressure.
The caliber seems interesting. More optimized for a system that needs to run .308 mag length cartridges, which we are not restricted to on the SRS Platform. If you're looking for a laser beam, you can grab something like a 28 Nosler.

 

[canezach]

Search “keymod qd” in google, there are many options. You can search “picatinny qd” too.

A1 doesn't have keymod. Picatinny will work, though. I didn't think about a pic mounted attachment, so thanks for the idea

 

[232593]

DT says to use moly grease for the bolt head. Any particular type? One of my bolt&barrels has heavy lift and I would like to eliminate that issue.

 

[jbrand11]

DT says to use moly grease for the bolt head. Any particular type? One of my bolt&barrels has heavy lift and I would like to eliminate that issue.

Try permeated anti seize. Just a small amount behind the lugs

 

[jbrand11]

Permatex

 

[wooferocau]

DT says to use moly grease for the bolt head. Any particular type? One of my bolt&barrels has heavy lift and I would like to eliminate that issue.

Tetra Gun Grease is excellent also..

 

[232593]

Tetra Gun Grease is excellent also..

Thank you

 

[232593]

Permatex

Thank you

 

[232593]

I’ll find those and give them a go.

 

[malJohann]

I doubt we'd ever see one from DT. I'm sure someone will do it at some point. Curious as to what barrel life is like pushing that sort of pressure.
The caliber seems interesting. More optimized for a system that needs to run .308 mag length cartridges, which we are not restricted to on the SRS Platform. If you're looking for a laser beam, you can grab something like a 28 Nosler.

I tend to favour military calibres due to economy of scale and availability that makes it’s way down to the civilian market, so .277 Fury, .300 NM and .338 NM has all my attention currently in selecting my next conversion kit.

 

[232593]

I doubt we'd ever see one from DT. I'm sure someone will do it at some point. Curious as to what barrel life is like pushing that sort of pressure.
The caliber seems interesting. More optimized for a system that needs to run .308 mag length cartridges, which we are not restricted to on the SRS Platform. If you're looking for a laser beam, you can grab something like a 28 Nosler.

Are bolt’s available for 26 & 28 Nosler?

 

[PRDRIVER]

Are bolt’s available for 26 & 28 Nosler?

Yes. We have some in stock.

 

[232593]

Yes. We have some in stock.

Thank you, who is “we”

 

[Dogtown]

Thank you, who is “we”

Desert Tech — SPECIAL PURPOSE RIFLES

www.specialpurposerifles.com

 

[SupressYourself]

A1 doesn't have keymod. Picatinny will work, though. I didn't think about a pic mounted attachment, so thanks for the idea

Put a rail on it, then this: https://www.midwayusa.com/product/1003245176?pid=746994
Not exactly "sleek", but it will work.

 

[232593]

Desert Tech — SPECIAL PURPOSE RIFLES

www.specialpurposerifles.com

Oh thank you

 

[232593]

Yes. We have some in stock.

You still selling the .375 Proof barrels?

 

[PRDRIVER]

I tend to favour military calibres due to economy of scale and availability that makes it’s way down to the civilian market, so .277 Fury, .300 NM and .338 NM has all my attention currently in selecting my next conversion kit.

I can understand that. We have 300 NM barrels on the shelf and have .338 blanks on hand. For custom barrels, I'm curious as to what we will see for demand on a .277 fury. I don't see tons of advantage in a bolt action rifle. I can see many pros that it has in a short/compact semi auto.

 

[PRDRIVER]

You still selling the .375 Proof barrels?

We are.

 

[malJohann]

I can understand that. We have 300 NM barrels on the shelf and have .338 blanks on hand. For custom barrels, I'm curious as to what we will see for demand on a .277 fury. I don't see tons of advantage in a bolt action rifle. I can see many pros that it has in a short/compact semi auto.

The same could be said about the 223 Rem conversion SAC makes.

I think it could be useful, e.g. here in Australia, .270 is the minimum calibre to hunt Sambar with.

Plus the aforementioned future ammo availability, so a potentially viable upgrade to the .223 Rem.

 

[canezach]

Put a rail on it, then this: https://www.midwayusa.com/product/1003245176?pid=746994
Not exactly "sleek", but it will work.

I ordered a similar one yesterday. I'm just going to mount the rail section a little further back

 

[st1650]

The same could be said about the 223 Rem conversion SAC makes.
.

I disagree. The 223 SAC kit is unbelievable. The only piece of kit I’ve ever regretted selling. I’ve owned many Gucci gassers and none of them ever came close.

 

[232593]

We are.

Finished barrels or blanks?

 

[malJohann]

I disagree. The 223 SAC kit is unbelievable. The only piece of kit I’ve ever regretted selling. I’ve owned many Gucci gassers and none of them ever came close.

You’re misunderstanding my response.

I mean exactly what you said, someone that doesn’t have a 223 SAC kit might think, why would I ever want one in a bolt gun?

The same goes for 277 Fury. I think like the 223 SAC kit, it’ll be well received.

 

[PRDRIVER]

Finished barrels or blanks?

we have 2 blanks on hand we can turn into finished barrels.

 

[232593]

we have 2 blanks on hand we can turn into finished barrels.

30” still right? What twist do you put on them?

How much less do they weigh than a standard factory barrel?

 

[wooferocau]

Just to emphasize just how accurate the HTI is...

I have just removed the IVEY adjustable mount i was using and have re installed a SPUHR 13mil fixed IMS mount. This arvo i re zeroed the HTI.

Note... DT factory 375CT barrel has now just over 1300 rounds through it!! and It still shoots like this!! 2x "3 shot" groups and 1 x "5 shot" group at 110yds..

 

[PRDRIVER]

30” still right? What twist do you put on them?

How much less do they weigh than a standard factory barrel?

30” The barrels we have are 1:10. We have some 1:8 on order.
for weight reduction numbers I’d need to go back double check. If I’m remembering correctly it was over 2 lbs.

 

[PRDRIVER]

30” The barrels we have are 1:10. We have some 1:8 on order.
for weight reduction numbers I’d need to go back double check. If I’m remembering correctly it was over 2 lbs.

 

[PRDRIVER]

Hope all you DT shooters have a great weekend.

 

[232593]

Hope all you DT shooters have a great weekend.

Thank you

If I can get my .408 425 grain CEB laser and N570 load finalized I will.