Bottomed out the zero stop, and this is the only suppressor I've shot with this extreme of a poi shift. The can that was on it before was .1mil low in shift repeatable. It didn't group at all with the can on 2in group was the best I managed with the can. No baffle strikes or anything wonky like that. It also shot the same with and without the tuner installed
Or mount the brake 180 degrees from current setting
Using the supplied shims, peel washer type took off .004 to get it timed right
What made me question it is the gun shoots good without the can but once I get some time I'll flip it 180 and see what happens
I figured if it was an alignment issue I would be getting baffle strikes. I cleaned the threads and timed the brake using the instructions on the back of the packaging and per website instructions. Went out and put on my old muzzledevice and can back on this afternoon. Back to sub moa groups and zero issues. Rifle shot fine with just the bare sr brake issues arose when mounting the can
I have no way of getting the barrel off easily no gunsmiths local to me and I don't have the tools needed I'll probably just leave it in the safe
Appreciate it I don't have the time at all during the week to troubleshoot it. I'll just leave my other can on and let the tbac live in the safe
You don't have time to unscrew 2-3 bolts and toss something in a box with some bubble-wrap and drop it at UPS?
What???? That's insane. You have a problem that makes it unusable, and you have a company that is going to fix it and ship it on them. Dude, I'm a super busy guy with little kids and all. You can find time to put it in a box and drop it off. That's nuts
Found the time to post here…
Because Saturday is my only day free from obligations sorry I don't have time to live at the range. Plus you would think a 2k suppressor would have been good from the get go I'll send my mount and can back through the rma process I don't have the time for anything else
If I had the time I would since I don't I won't. I also don't have the time to wait for my one rifle I hunt plink with when I have a little free time to be gone for a month
It's also the one decent rifle I own that I do everything with. I don't have time to sit and wait for my rifle to come back.
I get that, i do but Tbac has an outstanding rep, I'd bet they figure it out and have your rifle back pretty quickly. Sorry but it seems absolutely nuts to just stick it in the safe and forget about it, considering what we all pay and go through to get a can.
I won it in a raffle so I'm not out alot I'll probably throw it on some cheap 300bo bolt gun
If you send in the mount and brake, we will put a piece of bar stock in the lathe, thread it fresh, mount the brake on it while still in the lathe, and put the can on it, and measure runout. That will show one of them as the problem, or eliminate them.
