I don't have a need for the big boys and all of the AT's for sale have the fugly clubfoot stocks, doesn't make financial sense to buy an AO chassis and a $1K stock to make it a slightly better AT-X.
I don't have a need for the big boys and all of the AT's for sale have the fugly clubfoot stocks, doesn't make financial sense to buy an AO chassis and a $1K stock to make it a slightly better AT-X.
Whipped out the AX today. I forgot how unpleasant it is to shoot unsuppressed.
Pardon me, for a moment there I forgot which thread I was in
. AI and financial sense don't really belong in the same sentence haha.
Have any of you guys played with subsonic .308 loads?
I picked up some Lapua subsonic rounds when shopping after too much whiskey when ordering some FGMM.
Now im clear headed and wondering how my 20” 1:10 twist is going to stabilize? Checking with you geniuses before I head out and keyhole after a baffle strike
I picked up some Lapua subsonic rounds when shopping after too much whiskey when ordering some FGMM.
Now im clear headed and wondering how my 20” 1:10 twist is going to stabilize? Checking with you geniuses before I head out and keyhole after a baffle strike
Have any of you guys played with subsonic .308 loads?
I picked up some Lapua subsonic rounds when shopping after too much whiskey when ordering some FGMM.
Now im clear headed and wondering how my 20” 1:10 twist is going to stabilize? Checking with you geniuses before I head out and keyhole after a baffle strike
It should be fine... I run 220s sub from a 16 1-10
Pardon me, for a moment there I forgot which thread I was in
The hell you say!! My AI’s are some of the bestest Benjamin’s I ever spent!
I run the Lapua 200 sub‘s in my 18 inch 1-10 twist with a ultra 9 with no issuesHave any of you guys played with subsonic .308 loads?
I picked up some Lapua subsonic rounds when shopping after too much whiskey when ordering some FGMM.
Now im clear headed and wondering how my 20” 1:10 twist is going to stabilize? Checking with you geniuses before I head out and keyhole after a baffle strike
How I roll... straight comical
Spent all of my suppressor money on a licensed AI ball cap, and sticker.
Pardon me, for a moment there I forgot which thread I was in
A good looking bench at an MKM match
Can anyone tell me what mount this is? I know it's a AI mount but have never seen it sold to us peons.
Reach out to SportingServices UK and tell them you are looking for a L115A3 mount. Thats where I got mine. I don't believe AI ever sold these in the USA.
I did before I posted that. They already emailed me back. Just needing the pricing to finalize. Amazing customer service from Sporting Services UK.
Great to hear. Yes, they are great. Very easy to work with. What’s even more amazing, stuff from them shows up at my house faster than from MH or EO which I have not clue why that’s the case.
Great glass selection. Those are some of my all time favorites.
MC Hammers.. lol even when you run fatty 175 SMK's through it. And yes I ran it like a savage just for @Huskydriver and even threw in some artificial turf to really bring the firing point together
18.5” 308 barrel showed up couple days ago.
You sir have good taste in caliber and weapons system. I am shooting the 245s and everything on our AXSR is the same except I run a zco.
Okay clarify the myth for me
SFP vs LFP. My At is a 14 or 15. Can’t remember.
Will I need to have the bolt bushed if it’s a LFP if I want to run something like a 6 Creed?
SFP vs LFP. My At is a 14 or 15. Can’t remember.
Will I need to have the bolt bushed if it’s a LFP if I want to run something like a 6 Creed?
You can easily remove the bolt and measure the firing pin hole or firing pin tip diameter to determine if it's small or large. Something like 0.062" is small, 0.080" (can't remember the exact number) is large.
If it's large, you have three options. Try it with a 6 creed barrel, see if it blows primers or has pressure issues (large primers *should* be less likely to blow). Send the bolt to LRI and have it bushed. Buy a factory Bolt and firing pin assembly.
I'd rather have the factory bolt, but it's crazy expensive compared to sending to LRI.
I have a 2014, LFP and haven’t had any problems. Seems that the issue comes from small rifle primers, for the most part. If you stay with factory offerings with large rifle primers you shouldn’t have an issue with a large firing pin… Your mileage may vary.
Worlds colliding as @SAS_Sniper came out to Texas from Italy and shot the AT with me. I told him to try sneaking his AWM through TSA next time. He wasn't convinced lol.
Attachments
On my 14 LFP AX I had my primers on factory FGMM show like pressure signs. Never popped one, but they definitely had craters. I tried reloading some lfp 6.5cm and again showed like pressure signs way too soon. I ended up getting a new bolt and firing pin, back when it was as easy to get them.
Firearms - AWSM/AIAW old stocksides trade
Hi, Looking for the old stocksides in green for an AIAW or even better an AWSM. Already have some for the AW but the AWSM doesnt. Stumbled across those but it seems they are the AW stocksides... Looking for green ones. Might be willling to take different colours for the AWSM. I am located in...
www.snipershide.com
Offering AW stocksides to trade for AWSM/AW stocksides if anyone is interested.
Best regards
Daniel
My axmc slumin with @Long Range 338 cadex shadow and a scar20s .
Beautiful day to shoot.
@WEBSTER113 and @tevan0707 came out as well good shooting gents
.Beautiful day to shoot.
@WEBSTER113 and @tevan0707 came out as well good shooting gents
Stop showing me thumbholes with vision chassis’s! I’m broke but easily persuaded!
You mean the Shadow slummed with some Franken MC…My axmc slumin with @Long Range 338 cadex shadow and a scar20s
View attachment 8234532
Beautiful day to shoot.
@WEBSTER113 and @tevan0707 came out as well good shooting gents
View attachment 8234538
@Huskydriver what arca rail is that and do you like it? I've got the Elite Iron spigot on mine as well and don't want an arca sticking out below it.
BCX is correct no issues ranging 3900 yards with Sig 10K. His Steiner is much better unit but it comes at higher price which is expected.
