SPR(bugholes) will, PVA, straight jacket, LRI
- Thread starter karagias
- Start date
Quite the contrary. Mine was a couple weeks after opening, and I've had it for over a month.
Welp, I ordered a full PMR matrix pro with the CDG action last week. I'll probably post about it sometime next year when it shows upI don't know if it has been posted but with MPA's adoption of the ARC CDG, I hope we get larger traction with prefits like Proof.
MPA Elite Barreled Action - MasterPiece Arms, Inc.
The MPA Elite barreled action includes the MPA Elite Action, built by American Rifle Company (Coup de Grace Action) with an MPA Handlapped Hand Chambered Match Grade Barrel. They are available in a multitude of configurations, including with or without a trigger and in a black cerakote or...masterpiecearms.com
Ordered first week of May. Weeks ago I read here that someone had spoke to ARC and that all orders before July 1(?) would be fulfilled in the 4 month time frame. Maybe my memory is off on that.
Anyway, I'm well beyond 4 months. No action in hand yet.
Okay, so you made me do the math. You are all of what 2-3 weeks max past your imaginary due date? I wish you luck in your patient surveillance of the mailbox.
Found it.
My due date isn't imaginary. It's the stated (albeit loose) lead time via ARC's website. I do careful surveillance of that, too. Sorry I made you do math.
The data in this thread says its taken almost 6 months for most orders that are right handed actions. The latest data I've seen posted suggests 5.5 months to just under 6 months for both LA and SA RH actions.
I'd hope the lead times are coming down as they churn through orders. Hopefully ARC gets under the 4-month mark sooner than later. I'm not very confident in that for us common consumers, with Vudoo and now MPA ordering actions for in-house rifles.
FWIW I ordered my RH LA on 01 May so I'm right there with you. I'm one week out from the 5-month point. Based on past deliveries we're likely to see our actions before the end of October.
I saw the info about the vudoo version but its not even on there site
Good for you and the combination you bought....but that doesn't negate the fact that my 2/10 purchase date RH, LA, 30moa, Magnum is still not ready. I did talk to Bella last week and it sounds like it should ship in 2-3 weeks as their waiting on the next batch of magnum bolt faces to go out for heat treat.
Nope, didn’t find it.. soooo close… You do realize I’m not the one who stated 4 months, right?? no where in my post you quoted did I state a 4 month lead time. I’m sorry if I made you do reading comprehension.
Just on case you want to see how it comes apart, or get it apart and need some visuals with getting it back together check this out.
How To: ARC Coup de Grace Disassembly and Reassembly
How To: ARC Coup de Grace Disassembly and Reassembly
Im aware you didn't say 4 months. Im so aware of it, that I never put it on you. My 4 month timeline, like I clearly and explicitly stated earlier, was based upon ARC's website. Your post, if anything, was a small hit of hopium that it would be true.
Yet here we are: 5 days from Oct 1, and no sign of an action for so many of us. It would appear your almost staunch claims about "buy before July 1 and get it by Oct 1!" were complete and utter BS.
Seems to me you should be speaking as an authority on CDG order fullfilment about as much as you should "reading comprehension"
So, seeing as how, reading comprehension still alludes you, I’m going to try to brake this down to you Barney style…
So me putting a post about an expected arrival time of OCTEMBER 1 gave you hopium?? OCTEMBER 1, not October 1, but OCTEMBER 1… I apologize that my almost staunch claims about a fictitious date, that doesn’t even exist on any calendar I’ve ever seen, gave you hope and made you somehow think that I was a marketing and order fulfillment executive for ARC. It appears I will have to “place” another call to Ted and Bella and inquire to my late paychecks… hey, who knows, maybe they’re with your action!!!
So I once again recommend you work on your reading comprehension, as apparently I AM an authority on both reading comprehension and ARC’s order fulfillment, because OCTEMBER 1 hasn’t arrived yet, so ARC hasn’t missed the deadline and I have it on good authority, they never will miss that suspense date.
Lol, look. You should just let this die. By mentioning reading comprehension, he was referring to the fact that his post was tongue in cheek and was intended as a joke. Reading the posts before and after would have helped with this. Anyway, here’s what you should have seen in that post to clue you in:
I realize that it was subtle sarcasm, which is why you mistook it for factual and a misspelling. It’s okay since it’s interwebs and nuance can easily be lost.
Both he and I were using subtle humor to let you know that it will be here when it gets here. Not before, nor after, but when it actually gets here. You signed up for as much despite ARC and their optimism.
I don’t think it’s truly unrealistic to expect your shipping notice sometime in October, but don’t quote me as some source that said so. It’s completely a SWAG on my part.
hahaha wow. Yeah ok, ive been had. I accept defeat
It’s not defeat. Most of us are in this with you. I just didn’t want you to be arguing over something that won’t matter in 6 months, preferably a lot less.
It’s a fine action for a killer price. I’m just lucky that I have barely made plans for this build and am slowly gather pieces parts. It’s much easier to wait this way.
Np, I know the anxiety and desire to have them in hand, believe me, they are well worth the wait.
Listen here nosferatu, where’s my damn tacos…wait, what are we talking about again?
With MPA selling PMR rifles with this bad boy, I might sell mine and get that at a fraction of what I was going to end up paying
No tacos for you, burritos for all!!
Were you ever in that @TheGerman soft taco thread?
We would be happy to spin ya one up! They were a pain in the beginning but we have it figured out!
Straight Jacket did a Proof carbon for me and it turned out beautifully! Wouldn’t hesitate to go with them again.
Anyone on here have a need for an extra CDG or Barrel? Had some changes and I'm parting with mine. Just thought I'd ask before I put them up on the exchange
Might be good to pay for supporter status first.
Wasn’t there someone running a takeoff Savage barrel on their CDG? Thinking about picking up a 223 barrel to throw on while I’ll wait for my PBB 223AI barrel to get done… might feed a little wonky without the coned breach but who knows
I was under the impression that the only reason why the CDG required a con breach face was because it does not have an integral feed ramp so the con breach face would act as the feed ramp
The solus is also a completely different rifle.
First pages of this thread explain it all. Don't remember how far in. Karagias showed some pictures showing which ones need it and why and which will be fine without. Magnums are fine without.
My understanding was the coned breech helps with feeding from AW mags because they're double stack. It makes the entry hole larger. Maybe I misunderstood.
I reference the Solus because it's also a three lug bolt and feeds from an AW magazine. I figured it would run into the same issues as the CDG.
How I see it is the Solus was made to operate with either AICS or AW mags whereas the CDG was designed around the AW and to allow the magazine to sit higher, and that would be complicated with a feed ramp and thus the coned Breech face is preferred. If I am wrong on this, please, somebody correct me.
I can't wait to get one in. says 12-14 weeks. So hopefully sometime just after new years
Here’s how I installed and adjusted my trigger tech diamond on with the pivoting handle. It’s at my smith getting a barrel out on now!
How to Install TriggerTech Diamond on ARC Coup de Grace Trigger Hanger
How to Install TriggerTech Diamond on ARC Coup de Grace Trigger Hanger
I ordered action and barrel from PBB, and the expedited thing is real. I ordered July 25 and it all shipped on August 10th.
I called PBB last week, they said expedited orders typically ship in 3z4 weeks but that they had some delays getting 6mm blanks cut. They said it'll be made up pretty soon.
For anyone wondering about their old barrels from a Nuke or Archimedes, here is some anecdotal evidence. It also acted the same with a savage 308 barrel in the same configuration.
Yeah mine was all pretty basic stuff, SA, RH, 20MOA rail, barrel in 6.5 Creedmoor in their .850 taperless. Probably their most common order.
First group after zeroing to 100m and a little bit of barrel break-in came in at .8 MOA, which isn't bad considering I was using a pretty garbage rest and I'm not particularly skilled. So kudos to them on that.
One downside was that the wrench flats were not made square to the rail—they're off by about 20deg—which is a cosmetic blem but still a little annoying given that they had the action on hand when spinning the barrel. I said something to them about it, so hopefully they'll have their processed fixed for yours.
My Nuke barrel, shouldered pre-fit from PVA didn't clock the same between the CDG and Nuke.
Mine wasn’t threaded to the shoulder close enough, and wasn’t undercut.
Then don’t lol, but thanks for the feedback. I’ll do better next time
. I should say I’ll try to do better next time lol Mine didn’t clock in the exact same spot either, but the go/no-go gauges still checked out.
Well hell, good to know!
