I have no opinion about the SWAT sniper’s skill. But if he was lucky, it’s oft better to be lucky than good.
My thumbs up was all about your 1000yd first round hit and response. Bravo lol.
You to your buds after the shot:
Last edited:
1.=This is fair considering most departments aren’t busy enough for their city/county to justify the cost (even though the public’s expectation is always the same and the officers/teams should hold their standards as such. working in bum fuck nowhere with not as good equipment isn’t an excuse to suck). I’m retired from a busy/good sized dept in the Central Valley of gang land CA and we trained every week and felt it still wasn’t enough for our tempo. Whole team every other, sniper every other. So if you were on the sniper team it was every week and we were burning barrels on AI’s and training/competing often.
2. Agreed. Luck is a beautiful thing when it’s in your favor
. I don’t know what agency that was but I will say Florida has a few very busy/capable teams that train hard and often. As far as the swat world goes if I recall they have a few “tier 1” teams that are HRT capable. I’ve been out of the game a couple years so I won’t bet my pension on it but this was the case a couple years ago.
I still like harris and have quite a few of them. For the cost they can't be beat. This was on a 18+# m40a5 running prs type matches for a season.That’s definitely a failure. Never say never I guess. I just didn’t see it in my time. They impressed me enough that I still use em mostly. Except for on my AI. I will say I plan on trying one of the cool competition oriented bipods now that I can pick/use my own stuff.
Felt wobbly shooting off a table's bench and when I picked up my rifle to move to the next prop the bipod stayed behind
. Thought my lock uncharacteristically loosened up.
Dude was was lucky taking a shot with the 308 going transonic at that range
After years of waiting, I FINALLY am getting the Accuracy International .375 Cheytac conversion kit for my AX50:
Well, it might be if they don't get off their Arses and get us the conversion kits they promised years ago. First Barret and now Sako have left AI behind when it comes to the non-50bmg ELR calibers.
Oh, and because there are rules and all:
Well, it might be if they don't get off their Arses and get us the conversion kits they promised years ago. First Barret and now Sako have left AI behind when it comes to the non-50bmg ELR calibers.
Oh, and because there are rules and all:
1727 Match, Out in the wild, I've had mine since March.
Quite a showing at Summit Point last month
The more I shoot this rifle the more I love it.
Is anyone else running into an issue feeding the last round from a .308 AXSR mag? The first 9 feed perfect, but the last round typically gets hung up.
I’m reasonably certain it’s the follower getting in the way because of the last round hold open, but wanted to see if the experts here have run into this and have a fix before I bust out the 7-axis CNC and massacre a follower.
I’m reasonably certain it’s the follower getting in the way because of the last round hold open, but wanted to see if the experts here have run into this and have a fix before I bust out the 7-axis CNC and massacre a follower.
@Part Timer I have 3 .308 AXSR mags and all run perfectly without tweaking. These mags shouldnt have last round hold open tho. Sounds like one of your feed lips is jacked up and is positioning the follower too high.
Same. 3 mags here, no hold open and no feeding issues.
I could see the rear of the feed lips being bowed out a bit to allow the follower to rise.
Two different mags, the third is the same.
Two different mags, the third is the same.
Looks like as I said, your feed lip looks off and like it's barely containing the follower.
Here's a picture of one of my mags. The follower only ever so slightly contacts the bolt lugs.
Gets hung up exactly where? You say you are "reasonably certain" it's the follower. You should be able to watch the feed and know exactly where it's hanging. You can't fix it unless you know where the problem is. Put one round ("last round") in the mag, feed it slowly and watch for where it is hanging. I have an AXMC that had problems feeding 300NM, but not 338LM or 6.5CM. Additionally, it only hung up on the odd-numbered rounds in the mag (1,3,5, etc). One would naturally think it was the mag. It turned out that by watching it, I found it was a "step" in the two-piece feed ramp on the side in front of the odd-numbered rounds in the mag. The lock ring at the rear of the action was slightly misaligned and creating the step, and the bullet tip of the 230 Bergers in the 300NM would catch on it (no problem with the other cartridges). Run the bolt full-speed and the tips would skip over the step and feed. Run it slow and they would catch/not feed. No amount of mag-tweaking would fix it. It had to go back to AI to smooth the step out, no problems since. I would not have noticed the step if I hadn't run the bolt slowly and watched for where it was hanging up.
Saw this auction going on for what I thought was an AXMC. Have you guys seen this model before? I've never seen 'AI SF'. Couldn't find anything about it online either.
Last edited:
Nope...all good with 5 different mags purchased over 2 years. I shoot 308 or 6.5 CM out of them.
Look for a rivet protrusion from the follower that could catch your last round .
I have four 308 mags, and have some feeding issues, mostly rounds nosediving. It's not consistent enough to find the culprit though. I suspect it's the maglips, because all 4 mags have a lot of variation in the gap, front and back.
Early on, I did have pretty significant issues with feeding 6.5 CM, whereas, 308 and 6.5 PRC fed just fine. I have since chamfered the inlets for the rivets, and feeding has been much better, but I need to find the right gap for mag lips to correct the nosediving.
People who leave their QC stickers on are the same people that think a STAR card is a great deal. Boot fucks.
Oh yeah I can see the parallax knob from that pic.
Ok so new theory: he’s got a red dot mounted over the scope and that’s why the monitor got shot
I had a 16” Proof 308 and there may have been 1/2” between the end of the handguard and bbl threads.
Any length can be done if you do a forend snip.
Going to hack down the AXSR forend this winter and have my 308 chopped down to 16.5” for a fun shorty suppressed 308. Then finally paint the whole thing.
Can we please start calling this mod a circumcAIsion...?Any length can be done if you do a forend snip.
Going to hack down the AXSR forend this winter and have my 308 chopped down to 16.5” for a fun shorty suppressed 308. Then finally paint the whole thing.
Also, bro, fo' real, will you let me do that for you in the lathe rather than using your 7-axis mill for this... Haven't we talked about this before?
We have but I gots like 1/16th of meat left on this 4” disc so she be ready to work.
I just don’t know if I wanna go 14.5 or 16.1 on the length
We have but I gots like 1/16th of meat left on this 4” disc so she be ready to work.
I just don’t know if I wanna go 14.5 or 16.1 on the length
Short, Really Short 308
I love the idea. But if your can says only 14.5"+ from 308, I would pin and weld a muzzle device to get you to 16" and build it as a rifle with whatever stock/chassis you wanted. Or if you want to get a new can, get one with a shorter or no barrel length restrictions and go wild. 10" - 12"...
www.snipershide.com
You can go really short like @SkyScrapin.
is AX stock on AT frowned upon in this micro community, or whatevs? Post pics if you have one please.
That’s known as the AT LE. Great set up. Thumb hole is a vibe though
Hitting my range tonight with the AT
Couple 100 yard 3 shot groups. About 3/8”
Then plates at 280, 400 and 553 yards. Zero misses in a decent wind.
308 win
178 ELDX
Couple 100 yard 3 shot groups. About 3/8”
Then plates at 280, 400 and 553 yards. Zero misses in a decent wind.
308 win
178 ELDX
Last edited:
Huh. That’s pretty interesting. Here’s a couple links on that gun:
Maverick 41 .338 Lapua Mag Rifle Package
Maverick 41 Rifle Package | Only at EuroOptic.com!
They don’t have “SF” in the serial, however. No idea what that means.
That's an interesting rifle. Importer was AINA Mingus, TX and it looks like an MC on an AT chassis. This seems to date from around 2010.
AINA Mingus
AINA Mingus
Attachments
Last edited:
It was a awsm action in a ax chassis. Pretty cool rifleHuh. That’s pretty interesting. Here’s a couple links on that gun:
Maverick 41 .338 Lapua Mag Rifle Package
Maverick 41 Rifle Package | Only at EuroOptic.com!www.eurooptic.com
They don’t have “SF” in the serial, however. No idea what that means.
Nice paint! But that grip is giving off serious “banana in the tailpipe” vibes
Some folks must be spending -$20,000,000 to get this shit down to $255…
New Proof .308 Barrel stretched out to 900yds
Hit the range today and shot some more boringly accurate groups. Love this damn thing.
Anybody have pictures of an AT with Razor Gen 2? I'm looking at an NX8 4-32, Razor II and T6Xi 5-30 still. One of these days I'll make a decision.
Anybody have pictures of an AT with Razor Gen 2? I'm looking at an NX8 4-32, Razor II and T6Xi 5-30 still. One of these days I'll make a decision.
Skip the razor G2 and get the t6 530
A little AI VS SAKO competition today. My bestest AXSA ES, how did that color go again @Krob95 ?
High winds and 200 yards.
The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.
High winds and 200 yards.
The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.
How’re you liking the pmii 5-25 vs Tangent 5-25? Since you own both scopes. I’m deciding on a pmii 5-25. Or just get another Tangent for my next AI.
ES? You mean the best and most highly accurate color to grace our lifetimes? I will forever regret selling mine
It wasn't a prefit. Custom job done by JR Firearms in the UK.
I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.
At 100yds it was .2 -.3 MOA groups all day... prior to my injury...
Don't wear wedding rings folks.. that's all I'll say as the rest is quite graphic
