New to the club.
Don’t mind the razor, it’s a placeholder for now, I promise. Also, trying to figure out what bipod for this, long time Harris guy over here.
Don’t mind the razor, it’s a placeholder for now, I promise. Also, trying to figure out what bipod for this, long time Harris guy over here.
No, merely comparing AICS to trannies...
There are some awesome builds made with them, but an AI it isn't...and I say that owning an AI, but not being much of a fanboy.
Mark I in a Mark II folding chassis. Not the best pics, but it's all I have.
Before
After
My ATX chassis arrived today and the seller was gracious enough to send the action screws with it.
And for those of you wondering if the action screws are different.. very
ATX on the left, AT on the right.
Both the AT and ATX have different style heads for the front action screws vs the rear. But on the AT all four action screws are 4mm where as on the ATX the front are 3mm and the back are 4mm.
Obligatory picture tax.
And for those of you wondering if the action screws are different.. very
ATX on the left, AT on the right.
Both the AT and ATX have different style heads for the front action screws vs the rear. But on the AT all four action screws are 4mm where as on the ATX the front are 3mm and the back are 4mm.
Obligatory picture tax.
Last edited:
Don't worry, I am using an Atlas while I wait for a TBAC on order and to find a Cyke Double Pull in stock.
I run the atlas cal Gen 2 and cyke double pull as my primary bipods
Had the TBAC as well. But the atlas suited me better
I love the Atlas on my small frame gassers but I want something more substantial for these heavier sticks. I have been intrigued by the Accu-Tac bipods as well but I have never had the chance to play with one in person. I plan to pick up a Cyke Double Pull to try for classes and comps.
I also had the Accutac HD50. Solid bipod. Didn’t go as low as I wanted so I didn’t use it much but was build like a tank
I believe that was the one I had where when you pushed the lever on the leg the leg would slam all the way closed. Made hard for adjustment when the gun was setup.
Have you tried the atlas super cal? The super cal is like the BT65 but everything is doubled in size
Last edited:
That's my only gripe about the AccuTac, otherwise they're my favorite.
Down at Altus with my cousin getting ready for Saturday’s long range challenge match! No idea what to expect as this is an outlaw match…
Attachments
Last edited:
No idea, I only went for the first time last year.
Having said that this is a zeroing bay on the opposite side as the rock pile
You’ll have fun. The finals are a bit harder than the earlier matches, but they mix up the stages, and it is a bit of everything. Last years final had a real KYL. (Center hit the first target, fine, the second should be easy……..darned near missed the entire planet earth) The “sailboat” was tough. Used the unknown ranges and they are long.
But generally we have a good time, everyone is friendly and I keep coming back even though it’s an 8 hour drive. (We are family members there, its that nice of a place to shoot)
From several years ago. The East side was clear cut. It does affect the range a bit.
The west side has been cut and converted into an Unknown Distance range. It can be tough on days and easy on others. It is L O N G !
This shows the Unknown Distance range to the right. This was a very early picture. It’s a bit greener now.
They’ve added a new bunkhouse and another building just below the main building. Also, added some new berms between the original range and the unknown distance range. It has changed quite a bit even since 2020. Hardly recognizable from when we started shooting there in 2016.
Irrationally I want a MK i or ii.....I have an AT but something about the receiver/bolt shroud design I really like about the i/ii.
Fucking thread full of enablers. 
It's how we keep the poors out. Can't be mixing with those people.Fucking thread full of enablers.
Does anybody know the size of the ejector roll pin. I may or may not have damaged it by putting it back in. Thats what she said. Still functional, but I would like to have spares since I remove them for each new barrel to size brass.
Edit for tax.
Is it a sin to put an FDE barrel in an ES chassis, because it will be painted shortly.
Edit for tax.
Is it a sin to put an FDE barrel in an ES chassis, because it will be painted shortly.
Sucks that range control shut us down early, and after they told us we were GTG for the entire day.
For those who have done an AXMC grip conversion, do you find it worth it? Considering getting a set to run an ergo grip but having a hard time swallowing the ~$500 dollars for a vision/gtac conversion.
No, I stopped by at 11:30, but I was tied up overseeing the re-siding of the clubhouse.
I have a membership as well, but haven't been able to make it out yet
Firearms - Accuracy International AI-AX, 6cm, FDE with Case
For sale - Used FDE Short Action Accuracy International AX, with RRS handle and RRS handguard rail, 1 magazine, TBAC CB Brake 6 creedmore, ~680 rounds down the barrel. With Mile High Shooting hard case, AI-AX Custom foam insert, Mile high cheek rest. $5200 shipped and insured to your FFL
www.snipershide.com
Hella good deal
Was going to buy but don’t need 3 short actions.
On that note looking for a axsr with 300nm bolt. Can be beat up can be barrel less
Recently had my chassis recoated as it was black/camo. Waiting for the new Tango WMLRF to finish this out.
He said 1400 on an Instagram post a few days ago.
That's wildly cheap. Interested to see how well it performs.
Attachments
Supposedly uses AB. Made in China but programmed in the US. The display and remote cable fix my main complaints with the Vortex unit, so will be interesting to see how it performs.
Sadly, @hafejd30 now is taking care of her…
Once the dust settles I’ll be able to post more. Life lesson; never get married to a ho
