Just some data for you. Same ammo in a 16" vs 19" of mine. Only a 50fps difference and that equates to a 30yrd gain in the 19" before a 175 smk goes transonic. Unless that little bit makes a difference for you I'd personally keep the 16.5.
Oh I understand. This is me trading a spare barrel to help a buddy fit a barrel into his atx, his current barrel doesn’t work.
This is a bummer, I wanted the Mil/LE AT-XC lol. I sold the AT-LE a few years back, cool gun.
This is a bummer, I wanted the Mil/LE AT-XC lol. I sold the AT-LE a few years back, cool gun.
It does look pretty sweet with the grey, but we have to follow the rules as given to us.
Thanks! That is the answer I expected.
I know. I wish I had good info to share on that front, but I have nothing. I ask periodically to stay up to date.
I must be needing to go to the ophthalmologist, because my eyes are telling me you have a vortex on there
Last edited:
I mean I told my wife that the scope on mine was a Zero Cost Optic, that’s why those letters were right there….
Thought I saw a Chinese tripod too
Better get that stuff now before the tariffs go into effect
Looking to grab 16.5” barrel to run with this can. OAL will be about the same as the 24”.
That a Harris bipod or a Caldwell?
It appears the back end is bonded to the main part of the chassis.
All I can think of is after every shot yelling, “Fore!”
Paint that ball white and slap a tiny Titleist logo on it.
Last edited:
Playing guns in the yard.
Added the tall 20moa pic rail so I need a 1.54 mount now on the ATX but it doesn’t touch and works for now.
For comparison:
AXSR 24” barrel with TBAC Dominus
ATX 20” barrel with TBAC Magnus.
Added the tall 20moa pic rail so I need a 1.54 mount now on the ATX but it doesn’t touch and works for now.
For comparison:
AXSR 24” barrel with TBAC Dominus
ATX 20” barrel with TBAC Magnus.
Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....
www.snipershide.com
SOLD - Accuracy International AICS Magazines
Have a 7 round and 12 round with red plate left. Have a 7 round black. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. One tor $70 Two for $135 Three for $195
www.snipershide.com
Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....
SOLD - Accuracy International AICS Magazines
Have a 7 round and 12 round with red plate left. Have a 7 round black. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. One tor $70 Two for $135 Three for $195
Accuracy International AT-X/AX Magazines
Accuracy International Rifle Magazines for sale for the AT-X and AX rifles. A.I. Magazines, Doublestack, .308, in multiple colors, and more from Mile High Shooting.
www.milehighshooting.com
Promise i will hit you up first if i go through with this and decide to sell it!!!
Man looks like AT-LE has some following. I might be interested in a straight up trade with a long action
It’s for sure great to shoot and get behind, but the non thumbhole is a serious knock against it
If memory serves, regular AW mags work fine in an AX. The special AX mags pop in a little more securely. They have a little catch bumped out on the front, making them unusable in an AT unless you cut and pound the catch flush.Just bought an inbound AXSA in 6cr.....and these mags but now not sure they are compatible? Please advise.....
SOLD - Accuracy International AICS Magazines
Have a 7 round and 12 round with red plate left. Have a 7 round black. Each has a 2 round Seekins Extension. Have the base plates too if you want to take those off. One tor $70 Two for $135 Three for $195
Source: me. I used to own both.
You could always check this thread too:
AW/AE/AICS mag diffrences
This should be the last post about the diffrences between AI mags. 1st is a full view of .308 and .338 rifles. Take note at the diffrence in thickness in the mag well area: Close up of the .308's: Close up of the .338's: In each of the following mags there are 3 rounds loaded. These...
www.snipershide.com
IKR? I remember those things from my youth.Bro reached out from 1976
But given my experience with the digital variety, I wish I had one of those older mechanical scales.
So I have tried a lot of thumb rest contraptions for my AXMC. The ones I have tried all have compromises. Some interfere with the folding stock locking.
I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.
Here it is on my MC
It is really amazing. It was about $95 total, including shipping from London that cost $35.
I ran into this one from MBE Ballistics. It is billet machined and perfectly blends into the skins and chassis. It is ambidextrous. It has a curved rest that is comfortable and is adjustable front to rear.
Here it is on my MC
It is really amazing. It was about $95 total, including shipping from London that cost $35.
Mike makes good stuff, I'm running MBE bag riders & sleds on all three of my AT-X's
Can someone get him to make one for axsr? It blows my mind no one has came up with a good one yet.
Is the AXSR different than the MC with respect to the folding stock and location of the mounting points?
Ehh, I don't see either as better than the other, they just have different strengths and weaknesses. I have both and if I had to keep just one it'd likely be the Razor but I am glad that I don't have to make that decision.
There are no mounting points. Someone around here drilled and tapped theirs for XLR’s thumb rest.
The ATACR is easier for me to get behind. Have the G3 on the AT-X and ATACR on the AXSR.
Posted this over on the ATXC thread but these Green Meanies have relevance here too.
Really cool to shoot these back to back. The AW is an '07 in .308 and the ATXC is a '24 in 6.5cm...at least 17 years of technological advancement between these two examples.
Really cool to shoot these back to back. The AW is an '07 in .308 and the ATXC is a '24 in 6.5cm...at least 17 years of technological advancement between these two examples.
I discovered that the Limbsaver Recoil Pad Grind To Fit Black Small (1″ Thick/LOP) 10541, if installed upside down, fits on my AI AT, and if left unground offers a softer and wider recoil pad than factory.
See pics below.
-Stan
See pics below.
-Stan
