Mosin project.

[AGAT85]

double-bottomed flask with cap, tops, cleaning rod, magazine complete with screws, belt with punches, hook bolt and trigger with the trigger pin, coupler lock, double stabilizing screw, firing pin spring, spring donuts, bow tie, stand with screws, and spare elements to appear in this magazine. Trigger + piston barrage Mosin. Currently looking for, Mosin telescope.

 

[Greg Langelius *]

Just bought and installed the AIM Sport 2-7X Long Eye Relief scout-mounted scope, scope base and rings which replaces the existing Mosin rear sight leaf.

link: http://www.amazon.com/2-7x42-Relief...1361972437&sr=8-16&keywords=mosin+scope+mount

Remove the leaf by driving out the pivot pin, take off leaf and spring, replace with base using small screws threaded through the leaf pivot pin holes. The pin may require penetrating oil and significant time (mine needed 3 days to soak) before it can be driven out easily (I used a small hammer and the drive punch/cleaning rod toggle pin from an SKS cleaning kit). The base has set screws that set up so the proper amount of base slope can be adjusted.

The scope uses a 30mm tube body and the provided (see-thru) rings are about 10-15mm taller than what is actually needed. Using the provided rings will also require some sort of raised cheek rest.

The biggest advantage of this unit is that it does not obstruct stripper clip usage.

The scope is Chinese and cheap. It has a 'range finding reticle' that is sorta hokey and not well explained in the accompanying literature. But it does provide magnification and an adjustable point of aim, which makes it a big improvement over the basic iron sights.

Unless you understand the concept of an adjustable slope scope base, the first setup may not put the Point of Aim within the scope's adjustment range. That's OK, don't despair. Just readjust the base set screws until the base tilts up/down the right amount.

A laser bore sighter can be a huge help in setting up the slope angle adjustment.

Link: http://www.amazon.com/Bushnell-7401...=1361973075&sr=8-1&keywords=laser+boresighter

Greg

 

[AGAT85]

Hi,
Thank you for your reply and advice from you. They will help me, especially since this is my first project with such weapons. But I read a lot, has also established contact with me here in Poland, the man who provided me documentation about Mosin rifle. So I'm hopeful. I found a telescope, orginal. This is the version that was mounted to the rifle for hunting, if I buy it in August it will do you judge this album. It is a little tired but you can fix it. I was attracted Bushnell Laser Boresighter, I would gladly have bought the U.S. version but it s ebay. Unless you realize that maybe I was shipping by air to Polish?. And whether or not if you paid into account the amount of $ 28.81 to buy me this laser and sent to the Polish?,.

 

[Greg Langelius *]

I don't do things that way. I would much prefer you contacted Amazon and explained your goals; I'm guessing they could help you obtain what they provide.

 

[AGAT85]

I have learned already, I wrote to Amazon, I generally do not pay shipping with this, so I'll have to find in Poland or the German ebay I bought this telescope, is in the process of renovation