You haven't been looking I've seen plenty
- Thread starter redneckbmxer24
- Start date
It has been shown before, but never with a decent target. Well today I was at one of the 300 meter ranges that is within a reasonable driving distance, and this is what I managed.
The black box target is 80x80mm square, conditions where very windy and cold at -7 celsius and wind up to 10 meter / sek. If I have done my maths right the grouping equals 0,84 MOA. Not bad if I may say so myself.
The target:
The rifle:
(sorry for the calculator image, I ran out of daylight)
Ammo was handloads with Nosler 50grain Ballistic tip in Norma brass.
The black box target is 80x80mm square, conditions where very windy and cold at -7 celsius and wind up to 10 meter / sek. If I have done my maths right the grouping equals 0,84 MOA. Not bad if I may say so myself.
The target:
The rifle:
(sorry for the calculator image, I ran out of daylight)
Ammo was handloads with Nosler 50grain Ballistic tip in Norma brass.
Last edited:
It has been shown before, but never with a decent target. Well today I was at one of the 300 meter ranges that is within a reasonable driving distance, and this is what I managed.
The black box target is 80x80mm square, conditions where very windy and cold at -7 celsius and wind up to 10 meter / sek. If I have done my maths right the grouping equals 0,84 MOA. Not bad if I may say so myself.
The target:
The rifle:
(sorry for the calculator image, I ran out of daylight)
Ammo was handloads with Nosler 50grain Ballistic tip in Norma brass.
In that weather, that's an amazing grouping! Especially wth what I'm assuming to be a .223 Rem? If so good job my friend!
Sorry! The caliber is 22-250 rem, I forgot to mention that. You were pretty close though.
Ah cheating the wind a bit more with that cartridge..
I've always been a huge fan of all the. .22 caliber cartridges. I don't feel like many people give them enough credit as to all the purposes they serve. But anyway that's an amazing grouping in that type of weather with any cartridge!Andrew
Chassis is the factory tan, action has been cerakoted fde
Ah cheating the wind a bit more with that cartridge..
Andrew
That is true but the small 50 grain bullets are quite sensitive to the wind. But I am very happy with the result, I did not expect to shoot that well today, given the conditions.
my mistake , I ment around my area. The only thing in 223 around here are Ar's. And the real sad thing most workers in the firearm department at our local scheels have not even heard the brand AI . (That's the widest selection of ammo/parts).
MY REM .308 AAC-SD. She's a shooter when I do my part. The target is of a 3 shot group that I blew. The first two shots measured .344 - .308=.036 out of a factory AAC-SD, what else can I ask for!!!!!! Now for the short story, took two shots at 100 yards, saw first hit. Next took second shot but could not see it. I stopped shooting called range cold and I went down and looked at target and was amazed there was two shots together. I was stoked and pumped, so range went hot again and I took the third shot and pull it. Well this is that target!!!!!!
Last edited:
Just getting into some distance shooting. 700 in 308.
MY REM .308 AAC-SD. She's a shooter when I do my part. The target is of a 3 shot group that I blew. The first two shots measured .344 - .308=.036 out of a factory AAC-SD, what else can I ask for!!!!!! Now for the short story, took two shots at 100 yards, saw first hit. Next took second shot but could not see it. I stopped shooting called range cold and I went down and looked at target and was amazed there was two shots together. I was stoked and pumped, so range went hot again and I took the third shot and pull it. Well this is that target!!!!!!
Nice shooting! I like the looks of the rifle as well.
MY REM .308 AAC-SD. She's a shooter when I do my part. The target is of a 3 shot group that I blew. The first two shots measured .344 - .308=.036 out of a factory AAC-SD, what else can I ask for!!!!!! Now for the short story, took two shots at 100 yards, saw first hit. Next took second shot but could not see it. I stopped shooting called range cold and I went down and looked at target and was amazed there was two shots together. I was stoked and pumped, so range went hot again and I took the third shot and pull it. Well this is that target!!!
Curious as to what load you are shooting?
Here's my first .308. Savage 10 FCP, HS Precision stock and a few groupings. Go easy on me, still a beginner and this was the third time I went out to the range, the groupings are starting to come closer, were a lot worse before. Currently just using a mates scope, bushnell 3200 2-7 x 44 I think. Have ordered a Bushnell elite Tactical 6-24x50 which will go on this once it arrives.
My savage
https://dl.dropboxusercontent.com/u/673200/savage10FCP-HSP308.png
first grouping
https://dl.dropboxusercontent.com/u/673200/155g NRAA 308_small.png
second grouping
https://dl.dropboxusercontent.com/u/673200/155g Hornady Steel Match 4_small.png
My savage
https://dl.dropboxusercontent.com/u/673200/savage10FCP-HSP308.png
first grouping
https://dl.dropboxusercontent.com/u/673200/155g NRAA 308_small.png
second grouping
https://dl.dropboxusercontent.com/u/673200/155g Hornady Steel Match 4_small.png
Factory 175 308 FGMM, I just started to reload. I'm going to use Dan's load data It should be perfect. http://www.snipershide.com/shooting...ral-gold-medal-match-load-mk-316-mod-0-a.html
Also my groups tighten up for me by using the barrel de-resonator, you can see it close to the end of the muzzle It really works : http://www.limbsaver.com/store/product.php?productid=16256
Last edited:
Finally!
![url]](http://[url=http://img203.imageshack.us/img203/4802/dsc00294zjp.jp]ImageShack® - Online Photo and Video Hosting[/url])
STOLEN by Superior Tactical Solutions
If you see this rifle please let me know...THANKS
^^^^^^^ Stolen? I do all my shooting in NJ. That is an easily recognizable piece. I will keep a look out up my way for ya.
Thanks! Yes I did all the work on the stock myself. Used a marine epoxy for the texture and installed threaded flush cups with JB weld. Paint is Krylon.
My first precision rifle
Remington 700 in .308
Nightforce 20 MOA Base
Nightforce Medium Rings
Vortex Viper PST 6-24x50
AAC Brakeout
AICS 1.5
Looking either into an Atlas bipod or a Harris. Not sure just yet. Going to be picking up a reloading set up in the next month, can't wait to work up some loads for it. In the mean time I have some Hornady ammo and some Black Hills ammo for it.
Nice stick 308man
Larue Stealth
Larue Stealth 18" upper on top of a Larue Lower. Vortex Viper PST 2.5-10X32 FFP EBR-1 reticle.
Shot this group at 433 yards the steel is 5"X5"
Larue Stealth 18" upper on top of a Larue Lower. Vortex Viper PST 2.5-10X32 FFP EBR-1 reticle.
Shot this group at 433 yards the steel is 5"X5"
Last edited:
Awesome!
You should give the new AIbipod a go, have one sitting here and its really good in my opinion. Takes the features i like from the old AI bipod and some similar to the atlas and harris. It pretty well thought out.
Here's mine... 308 shorty, 260 rem, 30.06 classic model 70. The model 70 has been all over the world and was built by a US Palma Team member from the 68 team.
Savage 10 FCP McMillan .308 ATACS
Savage Model 10 FCP McMillan in .308 cut and thread job by hooper, action and scope Cerakoted FDE, with Patriot Brown secondary color, stock bedded and hydroprinted in ATACS. Leupold VX3 6.5-20x50, Warne rings, with Dark Eagle Custom 10 rd mags and extended mag release:
Savage Model 10 FCP McMillan in .308 cut and thread job by hooper, action and scope Cerakoted FDE, with Patriot Brown secondary color, stock bedded and hydroprinted in ATACS. Leupold VX3 6.5-20x50, Warne rings, with Dark Eagle Custom 10 rd mags and extended mag release:
Last edited:
Just got my AI AX 6.5 Creedmoor, 24" barrel, S&B 5-25x P4F
I am missing something here. I am impressed by this group, it is tight and on target, however I see many examples of targets that are a tight group 4" off target. I don't understand the concept. To me that means that the equipment is sound but the shooter can't put the rounds on target. What am I missing here? BTW I am not claiming to be a good shot. Most of my groups are not tight, but I do strive to put rounds on target. To me shooting a tight group off target makes no sense. Could someone please explain.
DeadSilence, when some people shoot groups, they make sure their point of aim differs from their point of impact. The theory is that if you're aiming at a hole, you won't be able to replicate that exact same point of impact again, giving you a larger group. And that doesn't impress people on the interwebz.
Good point dead silence. I would rather have a bigger group on target than a tiny group off target!
You are correct, and I agree, somewhat. Personally, I am more impressed when I see the group in the center of the target.
After I shoot a good group, wherever it is on the target, I move it to the center and try to replicate it. And it works most of the time. If the group cannot be replicated by turning the dials on the scope, then either the scope or the load isnt good.
I have shot groups like this. While my intent is to bring the POI to the center, I will finish the group. I only reload so much so when I hit the range, I don't take boat loads of ammo. I want to see groups.
Agreed. There is also the fact that some variations of reloads don't shoot exactly where your current load is sighted in...hence the term "load development"
Last edited:
nice overwatch bol!
1949 precision
Well that's old-school, nice. How accurate is it? And how good are the optics?
We have a winner. Post 4349.
^^^^^ I like that. #4349 that is.
It ain't much, but it's what I got, and I like it.
More specifically, a Remington "5R Milspec" .308 with a SS 10x24HD, Badger rail and rings, CDi bottom metal, home bolt knob install, old style Rem stock trigger, Harris bipod, and cerakote on the receiver and barrel.
More specifically, a Remington "5R Milspec" .308 with a SS 10x24HD, Badger rail and rings, CDi bottom metal, home bolt knob install, old style Rem stock trigger, Harris bipod, and cerakote on the receiver and barrel.
Last edited:
^^^^^^^ Dude.....that is a nice piece. I like it. I bet it shoots good too.
Edit: I like that bottom metal. Who makes it, and how many rounds does that mag hold?
Edit #2: I see you are in NJ. We should meet up at Cherry Ridge, and burn some powder.
Edit: I like that bottom metal. Who makes it, and how many rounds does that mag hold?
Edit #2: I see you are in NJ. We should meet up at Cherry Ridge, and burn some powder.
Last edited:
Its a CDi Precision bottom metal and it uses AI 5 and 10 round mags. Cherry Ridge yes when it warms up a bit.
Thanks. I'll pm you when we get a warm spell.
M96 kreg 24" SS bull
Remington 700 5R .308 24" fluted threaded barrel
Accuracy International AICS 2.0 chassis system
Seekins Precision 20MOA base and 34mm low rings
Bushnell Elite Tactical XRS 4.5-30 scope with G2DMR reticle
Flatline Ops covert 34mm accu - level and angle degree indicator
Harris BRMS 6-9 bipod + pod lock & Flatline Ops bipod slippers
YHM Phantom 30cal muzzle break & QD suppressor
Similar threads
