Precision Underground Suppressor Insulators. Lifetime warranty!

[Precision Underground]

I will put these up against any cover on the market. Full warranty on the insulator version. If you melt it with it installed properly, send it back and I’ll repair or replace it.

The extreme heat version is $79. I had to go up a little as the materials I am using are very pricey and I am burning through them quickly. I’ve had a couple of people ask why these are more expensive than some of the others for sale on the forum. These covers are not just nylon over welding felt. These are built for high temps and heavy mirage mitigation. They use a sleeve of high temp fiberglass, a layer of high temp silicone, carbon fiber felt, 100% genuine cordura, and 100% Kevlar braided cord. No 15 cent per foot paracord here.

The “cover” version is just cordura and felt for $59 (Reg $69)that is your typical cover for slow/moderate fire to achieve low mirage mitigation. Those will still look just as cool though!

Suppressors over 1.59” in diameter will be $10 more because the material cost is significantly more.



Please enter your model and dimensions in the notes on the order.
PrecisionUndergroundRifleGear.com


PrecisionUndergroundRifleGear.com

 

[deltawiskey]

What are the dimensions? How does it attach, is that an elastic over Velcro?
Thanks,
DW

 

[Precision Underground]

What are the dimensions? How does it attach, is that an elastic over Velcro?
Thanks,
DW

I’ll make it to your dimensions. It uses Kevlar cord to attach.

 

[Precision Underground]

I’ve got 4 left that can ship next week. Others will ship the week after. Plenty of stock on the colors so that’s your choice.

 

[Precision Underground]

I put these on sale to get some into peoples hands. $69 for the insulator cover $49 for the regular cover. Come and get em!

PrecisionUndergroundRifleGear.com

 

[deltawiskey]

Order placed! : )
DW

 

[Precision Underground]

Order placed! : )
DW

Got it thank you sir! They will go out next week. As always let me know if you aren't 100% satisfied with it!

 

[Precision Underground]

2 high temp sleeves left that can go out next week. I'll have more in the week after. Plenty of standard cover material in stock.

 

[37L1]

PayPal shows $79?

Never mind, got it figured out, ordered placed.

 

[SBGreen0369]

2 high temp sleeves left that can go out next week. I'll have more in the week after. Plenty of standard cover material in stock.

Order placed!

 

[Precision Underground]

Thanks for the support! Keep them coming!

 

[Precision Underground]

Order placed!

I can do label on the top or underneath. What do you guys like?
View attachment 6991189

 

[SBGreen0369]

I can do label on the top or underneath. What do you guys like?
View attachment 6991190

I like it under the Kevlar like the multicam in front

 

[37L1]

I like it under the Kevlar like the multicam in front

I agree.

 

[Precision Underground]

10 4 label on the side. I think I like it better there as well.

 

[skyewalker]

Label on the side. Any kryptek Highlander sleeves in the future?

 

[Precision Underground]

Label on the side. Any kryptek Highlander sleeves in the future?

Kryptec is a licensed product that you have to have a license to buy and use. If you see someone offering goods with kryptec and they aren’t a large company chances are its a knockoff cordura! I am always looking for new patterns though.

 

[Precision Underground]

I'm caught up on everything except black multicam which is scheduled for delivery tomorrow. I have a few items to put together with that and will be starting on new orders to ship next week. Come check out our site and get some gear!
PrecisionUndergroundRifleGear.com

 

[ForeverZ01]

Do you do any to fit a thunder beast takedown 22

 

[Precision Underground]

Do you do any to fit a thunder beast takedown 22

Sure. If you want the high temp version I’ll need to order a couple of things for 1” but I can do it no prob.

 

[ForeverZ01]

I’d like to get the standard version. Do you need dimensions

 

[Precision Underground]

I’d like to get the standard version. Do you need dimensions

Yea go to PrecisionUndergroundRifleGear.com and look under suppressor insulator. Put your dimensions and model in the notes. Put the actual dimensions and let me know if you want it a little shorter or longer.

 

[JWG284]

Do you have any that close by Velcro only so there aren't bungee strings hanging off?

 

[Precision Underground]

Do you have any that close by Velcro only so there aren't bungee strings hanging off?

I don’t but could make some. I’m using Kevlar now, no bungee here! Pm me if you want a velcro one and we’ll set something up.

 

[Precision Underground]

Do you have any that close by Velcro only so there aren't bungee strings hanging off?

Got a Velcro attachment in the works. I kind of like the look of the lacing but man the velcro is clean!

 

[SBGreen0369]

Got a Velcro attachment in the works. I kind of like the look of the lacing but man the velcro is clean!

Must. Post. Photo.

 

[gv3rd]

Just place an order for one. Interested to see how well it does compared to the one I have. Thanks.

 

[JWG284]

I want to see the Velcro version. Is there any way to sew a lip around the back edge to keep it from sliding forward?

 

[Precision Underground]

Just place an order for one. Interested to see how well it does compared to the one I have. Thanks.

If you mean how well it insulates I would def suggest upgrading to the high temp version. The extra $20 for it is literally $15 extra in materials (braided fiberglass, hi temp silicone, and Kevlar) and is well worth it.

 

[Precision Underground]

I want to see the Velcro version. Is there any way to sew a lip around the back edge to keep it from sliding forward?

I’ll have one ready for pics soon. Yea a rib is about the only way I’ll be able to lock a Velcro one from moving forward.

 

[Precision Underground]

Must. Post. Photo.

In a day or two!

 

[Precision Underground]

I want to see the Velcro version. Is there any way to sew a lip around the back edge to keep it from sliding forward?

Do we like Velcro straps or Velcro seam. I’m torn...

 

[jinxx4ever]

ordered, looking forward to it

 

[Ghost1941]

Tagged for photos.

 

[JWG284]

Do we like Velcro straps or Velcro seam. I’m torn...

I think a full Velcro seam would be good if it could get tight enough not to slip off.

 

[Precision Underground]

Can anyone confirm that they are getting order conf emails and other emails from the site? I had someone say they havent gotten any order and tracking emails. I had an issue with mail going to spam at first and hoping that's not the case.

 

[gv3rd]

I received an order confirmation.

 

[Precision Underground]

ELR10 code expires tonight. Come and get it!

 

[SBGreen0369]

Can anyone confirm that they are getting order conf emails and other emails from the site? I had someone say they havent gotten any order and tracking emails. I had an issue with mail going to spam at first and hoping that's not the case.

All of the emails I received after my order went into spam. I had to go in and manually allow them. However, in the spam folder was an order confirmation email, a status change email, and a shipment/tracking email

 

[z71rat]

Wanting to see pics of the Velcro “sinch” strap version. Seam Velcro won’t keep mine in place, as my suppressor is too slick.

DK

 

[Precision Underground]

All of the emails I received after my order went into spam. I had to go in and manually allow them. However, in the spam folder was an order confirmation email, a status change email, and a shipment/tracking email

Ugh. I don’t know why they are doing that. I changed the source address, hopefully that fixes it. What mail do you use?

 

[SBGreen0369]

Ugh. I don’t know why they are doing that. I changed the source address, hopefully that fixes it. What mail do you use?

Microsoft Outlook

 

[Precision Underground]

I sent out an email with a link to some quick instructions to put the insulators on. Here it is in case most of them went to spam!

https://precisionundergroundriflegear.com/products/suppressor-insulator/insulator-installation/

 

[Precision Underground]

Microsoft Outlook

10 4 thanks.

 

[Precision Underground]

Sounds like a few of the emails are going to spam. Everyone please check and mark them as not spam so hopefully they won't be flagged anymore. I'm guessing it's because it is a new URL.

 

[Precision Underground]

I am waiting on a shipment of materials to finish about 7 or 8 insulators. I apologize for the delay. Even though these are made to order my goal is to have them shipped no more than 2 days from order. A lot more orders came in than expected and depleted my materials. I can burn the midnight oil to get them out but waiting on UPS ties my hands! Tracking says Thursday but hopefully that gets pushed up a day since the last scan was not far away from me. I tripled my order of materials from last time so hopefully there will be no more delays!

 

[sid]

I received my cover yesterday, I had one ordered for a Gemtech Tracker, it fits perfectly, looks and feels Like good Quality

Shipping was 2 days faster then expected, and the upgrade was very nice !! When my other suppressors finally get out of jail I will order more from you!

Thank you

 

[Precision Underground]

I received my cover yesterday, I had one ordered for a Gemtech Tracker, it fits perfectly, looks and feels Like good Quality

Shipping was 2 days faster then expected, and the upgrade was very nice !! When my other suppressors finally get out of jail I will order more from you!

Thank you

Nice! If you have any trouble with it slipping forward wrap that Kevlar around the back of the can and cinch it down.

 

[hertz654]

I'm a day late and a dollar short -- just found this thread and missed out on the extra 10% off discount. Tagged for future reference.

 

[Precision Underground]

I think a full Velcro seam would be good if it could get tight enough not to slip off.

VELCRO VERSION SOON! This one looks pretty good. It’s a little rough seam-wise. That can be cleaned up easily. And this is scrap velcro, I’ll use precut strips for production so they are clean edged. I really didn’t like the rib. It wouldn’t grab like I wanted. I threaded some Kevlar and put a clamp on it so it can be tightened around the back of the suppressor. So there is a little cord but it’s super short and hardly noticeable. I’ll move the seams around a bit to make it look cleaner and adjust a few small things and I think it will be good to go.