For the Howa 1500 SA RH inlet, yes. The MagPul Pmags are only designed to work with the R700 SA platform and don't really agree with anything else.
- Thread starter Lowlight
- Start date
For the Howa 1500 SA RH inlet, yes. The MagPul Pmags are only designed to work with the R700 SA platform and don't really agree with anything else.
got it, thank you for the quick response. I am very close to purchasing one so i just want to make sure i have all the info!
On the AICS magazines...What is the max COAL it will accept?
2.8inches for 308 mdt polymer aics mag is what mdt oryx website says. Magpul aics polymer specs are 2.86.
@Farmerdanss is right, but it depends on what action you are using too. If you are able to use metal magazines in your action, then you may also be able to use non-binder plate magazines which can be loaded to 2.960".
So we don't offer the Oryx yet for the R700 LA, but the magazines you will want to use when we do get around to releasing that will be the 3.715" metal mags with an interior OAL of 3.600".
Cannot confirm dates yet, but keep an eye out for them
None of the LA's are available for a pre-order yet, but everything on the list is back orderable! As far as I know, the only one currently out of stock is the Savage SA.
Hey josh,
I have just a few questions! I know some chassis are a little fussy over mags, even if they are AICS. Does the oryx take magpul AICS mags no problem or have y’all noticed problems?
My other question is: the Ruger American Inletted chassis is supposed to ship early February. If I order before or on the first of February, will the chassis make it to me by the 1st of March???
Thanks in advance, and great job with this chassis!
Launch not the smoothest but very pleased with the product.
Can't wait to pair this with an MDT Ckye-Pod
This is a Tikka T3 chambered in 6.5CM with a 12 round non-binder plate mag installed - feeds fine (with this specific combo)
Can't wait to pair this with an MDT Ckye-Pod
This is a Tikka T3 chambered in 6.5CM with a 12 round non-binder plate mag installed - feeds fine (with this specific combo)
Hey @RJW6220 ! We have noticed that depending on the magwell geometry on some chassis (especially with the older design like we were using pre-2015 or so), they can be very temperamental and not work as intended. The Magpul AICS pattern mags were designed to fit and function with the R700 SA action footprint and can be picky when used with anything else. Magpul does say this on their website:
"While other rifle platforms, such as the Ruger American Rifle®, can be upgraded for use with AICS-spec bottom metal and magazines, the internal design features may present some feeding and reliability concerns when used with the standard PMAG 10 7.62 AC magazine in non-.308 based calibers. "
As for the shipping timeline, yes, if you were to order on 1 Feb, we should have a chassis to your door before 1 Mar. This is not a 100% guarantee, especially with government shutdowns and other issues with our website/shipping, but we should be able to get one to you!
Also @dntworry sorry to hear of the mess up on our end, but I am happy that you got everything built and ready to go! I am excited to see how it shoots.
No. The cheek riser is the same, but you don't have the same side-to-side adjustment and you can only raise/lower it with the set screws included. Also, the buttpad is a little different and the LOP is adjusted through the use of spacers with are 0.250" thick for semi-fine adjustment. A little different to our SRS and SCS stocks from MDT.
Understood! I’m hoping that the magpul AICS mags I have work with this chassis as well as they work with the other their MDT chassis our club has! We have 2 weatherbys, and a savage 10ba that our club actually uses my mags for because they work so well in them!
I plan to order an oryx in ruger American SA on feb 1st! And if the universe permits, it will be heading to Nebraska March 8th for the Bighorn steel classic NRL March!
Looks like we have our first review on the Oryx. 8541 Tactical put up a video today.
Which of the AICS mags'. will fit the chassis using a .284 case?
Cannot confirm dates yet, but keep an eye out for them
None of the LA's are available for a pre-order yet, but everything on the list is back orderable! As far as I know, the only one currently out of stock is the Savage SA.
What is the timeframe of when the savage short actions will ship?
We should have the grey and FDE available soon! Looking like the side panels will be in stock in a few weeks.
Which action and caliber combo are you looking at building? If it's the .284 Win, then the only LA that we currently offer is the Howa 1500 LA, with more options to come soon! In which case, all LA actions will use the 3.715" magazines, except for the Tikka T3/x's.
Unfortunately not. The only way to ensure that one of our ambidextrous magazine releases will work (or any other aftermarket ones for that matter) would be to remove material from either the chassis or latch.
No date yet, but they should be back in stock soon! We are doing runs as fast as we can
The Savages sold quicker than we expected!If you ordered one when they were in stock, it should already be on it's way! If you have backordered one, then allow for up to 4-6 weeks (but it will probably ship soon
)Which of the AICS mags'. will fit the chassis using a .284 case?
Which action and caliber combo are you looking at building? If it's the .284 Win, then the only LA that we currently offer is the Howa 1500 LA, with more options to come soon! In which case, all LA actions will use the 3.715" magazines, except for the Tikka T3/x's.
REM 700 LA for a 25-284. Am I correct that the AICS 300WM 5 rd. mag will fit the chassis?
Which action and caliber combo are you looking at building? If it's the .284 Win, then the only LA that we currently offer is the Howa 1500 LA, with more options to come soon! In which case, all LA actions will use the 3.715" magazines, except for the Tikka T3/x's.
REM 700 LA for a 25-284. Am I correct that the AICS 300WM 5 rd. mag will fit the chassis?
Okay, so you will need the 700 LA chassis that is not available yet, but will use standard 3.715" magazines when it releases!
Working on it! A lot of us are out for SHOT this week, but sales, design and shipping are rotating out to ensure product is still going out the door to you guys.
The AICS shows the following AOL sizes...2.95, 3.625, 3.65, and 3.77.
Yes, the AICS pattern magazines come in all of those sizes depending on your action size. For short action chassis you will be running the ~2.950" magazine length, with all the other lengths being particular to long actions
That was a prototype magazine that we tried to get to work with the Howa mini, but unfortunately the program didn't go through. We may pick the project backup in the future but no word as of yet.@MDT_Josh, can you please comment on the MDT Howa Mini magazine depicted here? They appear longer (higher capacity) than the Legacy Sports Mini magazines. Are these 10-round Grendel flavor? Can you provide the max internal OAL length, please?
I have to quit looking at these before i order one. Thinking about getting one for a hunting build for my son, but don't need it done until next fall and have an order in for one of the NSS Bat actions so need to not splurge. Would love to get my hands on one to try out for sure though. Think that this will slow sales of the krg bravo, I know if this had been out a few months ago my matching nucleus builds for me and my boy would probably be in an oryx and not a bravo.
I did not think I would have to wait until Christmas. It's been two weeks and it had not shipped yet.?!!!
Moving products out the door during shot show is a real challenge. Be patient Daniel Son.
Hey just give em a call or email if you haven't yet concerning your order. I too was patiently waiting for quite a while and my order status on the website stayed at "processing". Emailed them at [email protected] with my order number and in very short order they replied telling me my payment was declined and told me to place another order that they'll try to ship it out the same day. So I did right away and then again waited patiently but my order status stayed at "processing". That was two days ago. Today I emailed again and they replied very quickly telling me my order DID ship out same day along with tracking number. Gonna have it in hand tomorrow.
Great service guys...website just needs a bit more tweakingBe patient my ass. The guy I ordered from said it would ship the first of last week. The guy I talked to at the end of last week said it would ship this week. If shipping is slow just tell me. Yes I would be unhappy. Jacking me around just makes me mad.
MDT Josh, what kind of recoil lug does this chassis have? A steel one or an aluminum one?
I am very sorry to hear about your issues with our shipping times and if you want, reach out to me and I will get you an updated timeline on your order. @Codiekfx400 is right that things have been slower around SHOT show with a reduced team in house, but it is still no excuse for us to not have accurate dates for you.
We ship all of our Tikka chassis with an upgraded, steel recoil lug that we machine in house. No need to reuse your OEM one or go out and buy someone else's
Yessir. This chassis only weighs in the neighborhood of 4.5 lb (say 5.5 lb with a full magazine) and we would not expect users to drop in a CIP length action. If it is something you're after however, feel free to let the team know at [email protected] and we'll see about getting them implemented!
The Tikka SA chassis that we (and others) make will not work with the T1x without modification to clear the magwell retaining screw, however, our LA chassis might (without modification). We are just waiting for our T1x to arrive to test this theory out
Have there been any further updates about the T1x? for the Oryx or any other MDT chassis?
Similar threads
Precision Rifle Gear MDT ACC Elite Chassis Circlips
