• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Marc's Weaponized Math

Lowlight

HMFIC of this Shit
Staff member
Moderator
Supporter
Minuteman
  • Apr 12, 2001
    35,483
    39,178
    Base of the Rockies
    www.snipershide.com
    Here is the link to the article on the Math we discussed in the Podcast from Alaska


    Weaponized Math Article

    Take my 6.5, for instance, at my home range: 8.7 at 1,000 minus 5.8 at 800 equals 2.9 Mils of drop in that 200-yard gap. If I take that 2.9 and multiply it by .45, it gives me 1.3 Mils. Add that to my 800-yard data of 5.8 and it gives me... guess what...? What my TRASOL spits out for my 900-yard data!


    8.7-5.8 = 2.9.


    2.9 x .45 = 1.3


    5.8 + 1.3 = 7.1 Mils


    7.1 Mils to a water-line hit


    This was great. Problem solved at 900 from now on, and it saved student ammo and instructor aggravation. I could now concentrate on the student’s wind call knowing that the data I gave him was elevation-correct, minus his input and windage. And it works in MOA or Mil, of course. I had created voodoo.
     
    Last edited:
    Here is the link to the article on the Math we discussed in the Podcast from Alaska


    Weaponized Math Article

    Take my 6.5, for instance, at my home range: 8.7 at 1,000 minus 5.8 at 800 equals 2.9 Mils of drop in that 200-yard gap. If I take that 2.9 and multiply it by .45, it gives me 1.3 Mils. Add that to my 800-yard data of 5.8 and it gives me... guess what...? What my TRASOL spits out for my 900-yard data!


    8.7-5.8 = 2.9.


    2.9 x .45 = 1.3


    5.8 + 1.3 = 7.1 Mils


    7.1 Mils to a water-line hit


    This was great. Problem solved at 900 from now on, and it saved student ammo and instructor aggravation. I could now concentrate on the student’s wind call knowing that the data I gave him was elevation-correct, minus his input and windage. And it works in MOA or Mil, of course. I had created voodoo.
    still wont help you on a plate at 300 though Frank
     
    900 has to be 1.22 and 1000 to 1.20 for it to work on my 6.5.
     
    Trying to simplify my work flow at matches I’ve gone back ti using paper dope sheets with 50yard intervals. This works for finding shots between my data points. 147 eldm @ 2740
    1000 to 1500 I’ve been using .4
    500 to 1000 I’ve been using .45
    And inside 500 I’ve been using .5

    I seldom miss due to elevation on 2 moa or bigger. Oh I definitely miss my fair share R&L.!!
     
    Thank you for this Math, really helps with friends at the range!!!!

    Question and I apologize in advance if its been asked before, I see a high speed number and a low speed number, but both of these numbers are no where near my numbers for fps. Any idea on how speed effects the results. I see tweaking and I know its just to get on steel I'm not looking for centered hits. But 6.5 for example is only running 2650's I got to assume that's gonna through off the math!!
     
    we see more variation in the shooter than the MV.

    This is from the data we record from the class and their shooters, we monitor their dope

    You can always plus and minus it a touch if you need it to line up too a different speed.
     
    Have a buddy coming out to shoot this week. He just a hunter with no real “math” experience when it comes to shooting.

    I had @JC Steel build a truing target like the one Frank has posted.

    Gonna start at 300 and work back in 100yd increments and use this method to get his dope for his 6.5.

    8F86DC64-4525-4C61-BF33-7DE2228F6EA2.jpeg
     
    Have a buddy coming out to shoot this week. He just a hunter with no real “math” experience when it comes to shooting.

    I had @JC Steel build a truing target like the one Frank has posted.

    Gonna start at 300 and work back in 100yd increments and use this method to get his dope for his 6.5.

    View attachment 7135866
    How far are you working back with Marc’s method?
     
    Last edited:
    I used Mark's math over the weekend for a friends brand new AI in 6.5. It was spot on out to 600 yards. We started at 300 with 1.0mil had 10" steel circle at 400 and the math put him on it first shot. A minor adjustment to center line and some quick math put him on the plate at 500 with the first shot again. Again a quick adjustment to center line and some more math and solid hit at 600. All in all we had good data for that rifle within 1 box of ammo. Not only was it easy and effective it was a cost savings as well!!!!!

    This is a great tool.....I've copied all the numbers and put it into my data book to use later. I know its just a matter of time until I go looking for it again.
     
    • Love
    Reactions: Enough Said
    200 is a pretty standard value,

    if you cannot hit 200, time to get a new hobby.

    .5 Mils is the basic, 2 MOA with just about any caliber, the fine tune will be for location and MV

    But you should be within an inch of 200 just using 2 MOA
     
    • Like
    Reactions: Enough Said
    @lowlight

    In another thread you posted your weaponized math work sheet. Could you please post it either here, or in "Resources" to make it easy to find?

    Edit: Nevermind, found it.
     

    Attachments

    • Weaponized Math and MOA to Mils.pdf
      160.2 KB · Views: 511
    Last edited by a moderator:
    • Like
    Reactions: Old97 and ruebarb
    Gents, I am curious how the weaponized math might apply to meters. I could directly translate 600yds to 548m, 700yds etc, otherwise I don't see the percentages lining up correctly.... What says you?
     
    Gents, I am curious how the weaponized math might apply to meters. I could directly translate 600yds to 548m, 700yds etc, otherwise I don't see the percentages lining up correctly.... What says you?
    Just replace yds for m. It’s not a perfect science, it’s to get you very close and then true.
     
    • Like
    Reactions: Ratchety
    METERS -
    Just found this post.
    I'm betting that if you add 9% of each factor to that factor, it will put you near center plate.
    Correct me if I'm wrong. Didn't do the math, Just figuring that's gonna be close.
    Taylor
     
    For us simpletons, I'm guessing this would also work in MOA? If so, I created the attached table to convert everything over, if someone wants to check my work. Each cell won't match exactly to the Mil table, but I used a middle benchmark row and worked back from there.
     

    Attachments

    • Weaponized Math - MOA.pdf
      53.9 KB · Views: 227
    • Like
    Reactions: Enough Said
    Correct,

    Mils or MOA does not matter, both can be interchanged using 3.43
    Cool, I'll put this table to work then (instead of carrying the mil table and needing to convert each one on the fly). Hope this helps anyone that's using MOA instead of mils.
     
    Recently introduced a friend to the fun of shooting steel at range and we have been assembling a Tikka T3X Tact in 6.5 CM for his first ever bolt gun (at 70 yo) for him. We were able to get solid DOPE out to 800 last week. This week we decided to stretch his legs a little and were shooting 3 MOA tagets on the line from 300 to 1K. we had no dope at 900 and 1K so i verifeid his DOPE at 600-800 and then dialed in his come up for 900. I have never been so pleased! The first round he sent was an absolute dead center punch on the steel! Truly amazing! Verified the DOPE with 4 more rounds and then repeated the process with precisely the same results at 1K. I cannot tell you how gratifying that was. Many, many thanks to you Mark for sharing this nugget of wisdom!
     
    • Love
    Reactions: Enough Said
    I have attached a excel doc with the weaponized math and added aditional worksheets for Mils, TMOA & SMOA. both are setup for yards and meters. Based on Marc's @Enough Said 9% (9.4%) correction for meters. If i have messed up the math, please let me know. I have added to the side of the table the correction factor used to get the figures. Hope this helps.
     

    Attachments

    • Weaponized Math - All units.zip
      43.5 KB · Views: 257
    • Like
    Reactions: Old97
    I would love for someone to break this down with crayons for me because I keep getting questions about this.
     
    Last edited:
    There really is no "math" you can just read the chart Ted created

    Weaponized Math and MOA to Mils.jpg


    if you use 1.0 Mils to hit 300 yards, Point of Aim, Point of Impact,

    moving to 400 you start with 1.7 Mils, after shooting and determining point of aim, point of impact at 400, you use that number to give you the 500 yard starting point.

    it's trued and verified data, that fills in the blanks for you, it's gravity, not bullet weight, BC, muzzle velocity, sight height, twist rate, bullet length, azimuth to target, it's just gravity, that is it, you use the confirmed data from the previous yard line to line up the next 100 yard target.