NoLegs24, It's the Indian not the arrow, OH can I say that?
Nightforce showed you on Instagram today also. Congrats and Nice Mrad!
Looks the one Bugholes sells.Congrats!
What bag rider is that?
@The Durk .................. Do it! An investment, something to be proud of.View attachment 7352588
What ARCA rail are you using ?
Thank youHRD Gear AFAX09, it's great - very well made, solid.
I believe I saw it was 300NM.
Ax50 or AX ELR moneyI also saw the IG post. Congrats nolegs24. MRAD is a sweet prize. It will being plenty of AI funds
Amazing performance.
Thanks for all the info. Curious which spuhr you’re using — how much additional cant are you adding? Thanks.@AXMC It's the Bagrider from Bugholes... AIAX Bag Rider
@Palmetto-Pride I was running a 300NM. Pushing Bergers 220gr LRHT at 2980fps. New Lapua brass out the box. Only prep work I did was use an expander Mandrel to fix dented necks during shipment. And more consistent seating force. Different lot of brass from what I found the load with. Still got single digit ES.
H1000 and Federal 215M primers
@Jrb572 look into the the Sawtooth Rifles rails. You'll thank me later... Sawtooth Rifle Dovetail Rail
Any running a 33XC or 37XC? Thinking an ASR in either of those cartridges would be tits
Alright thanks, I had issues with a 1.5" height Spuhr with 44MOA cant on top of a SRS A1 0MOA rail.@M289
It's an ASR. Forgot what specific coating they used. It's different than the Dark Earth on the AXSR though.
I use the ARD that comes with the TT's. So plenty of clearance with the 1.5" height
From AINA:I’m getting my competition trigger pack in today. In case it’s not in the directions, anyone know the torque spec for the 2 trigger mounting screws? I’m guessing 40ish in-lbs?
Ah that makes sense. So it’ll be different from the Dark Earth colour that AI UK uses.@M289
I belive the ASR is Federal 20150 / Surge Brown that meets the contract requirement. This is the same as the TBAC 338 Ultra SR suppressor color.
Ah that makes sense. So it’ll be different from the Dark Earth colour that AI UK uses.
I was told it’s “Flat Dark Earth” but the AI brochure and data sheets refer to it as just “Dark Earth”. Not sure if that is also an official Cerakote colour or that it’s a custom mix from AI like their infamous AI Pale Brown.
We’ll see when I get my AI AXMKIII rifle
Super helpful and informative sir. You think 30 MOA of cant would be too much (50 total with the integral rail).@Palmetto-Pride Nope
@Georgedubya It's a 4602 (20moa, ASR also has 20moa). I try to maximize the can't I can use on TT's to get as much external elevation I can get while still being able to zero at 100y, regardless of cartridge/ caliber. But not enough to cause an oval effect in using too much can't.
May I ask what model Spuhr mount you used for your TT525P? SP-4602?
I’m going to go 50 I think just because I like to play around with different calibers. But I think you could probably squeeze 60.With the TT you can only go 40 moa total. 50moa is too much with only 28 mils in the scope. The NF 7-35 and ZCO you can go 50moa and be fine. May be able to get away with a 60moa total pending your rifle and specific scope. I had a 7-35 with 60moa base/mount and still had 100yard zero.
I think it is the same as a AXMC barrelAnyone making Prefits for the AXSR?
I think it is the same as a AXMC barrel
May I ask what model Spuhr mount you used for your TT525P? SP-4602?
Anyone know whether the Hoptic cheekrest pads for AXMC fit the ASR...my first AI? Awesome rifle, was @ https://www.shootersgauntlet.com/ the first part of the week w/ 300NM and 6.5CM. Wow!
Thanks, one more question How much did you have to dial up to get a 100m/y zero?4302
Thanks, one more question How much did you have to dial up to get a 100m/y zero?
I wonder if you could get away with using the SP-4602 with 6 MIL instead of the SP-4302 with 3 MIL.no fuckin idea, that scope has been oneverything from 223 - 300prc.
i can dial 26 mils when it’s zeroed for 300prc.
Just threw a 6.5prc barrel on and I’ll update when I zero it later today
I wonder if you could get away with using the SP-4602 with 6 MIL instead of the SP-4302 with 3 MIL.
The TT525P has 30 MIL of internal adjustment, 28 MIL on the turrets.
Reasoning that the 30 MOA rail (8.89 MIL) + 20,6 MOA mount (6.00 MIL) would give you dead-on at the zero with 50,6 MOA /14.89 MIL.
I wonder if you could get away with using the SP-4602 with 6 MIL instead of the SP-4302 with 3 MIL.
The TT525P has 30 MIL of internal adjustment, 28 MIL on the turrets.
Reasoning that the 30 MOA rail (8.89 MIL) + 20,6 MOA mount (6.00 MIL) would give you dead-on at the zero with 50,6 MOA /14.89 MIL.
Just pulled the trigger on my AXSR from Eurooptic.