300 yards just to verify my dope from the prone.... That's a .5" paster...
I think it shoots aight..... 175smk 41.5 gr varget. Seated .02 off.
I think it shoots aight..... 175smk 41.5 gr varget. Seated .02 off.
Just curious, and not being snarky. Have you looked into your body position and scope position? Your scope is crazy far forward, and you have a really long LOP on the stock as well. I know the VW shooting position is compromised, but the picture of you on the barricade makes it look like your body is bladed, your head is canted, and the stock is more in your middle of your shoulder than your collar bone/shoulder pocket. Wondering if you've considered bringing the scope rearward a bit and squaring up more behind the rifle?
^^ someone smarter than me please enlighten us........this would be great to know for future referenceI’m thinking about revisiting an old idea I had but I was thinking about buying the AXSR in 338LM and wondering if anyone has cleaned the chamber up with a 33XC reamer without needing to set the barrel back?
anyone have the receiver print for the action?
Looks great! Almost too clean gotta get that sucker dirty and banged upFinally did my satin nutmeg barrel paint job that @Huskydriver recommended. super happy with the way it turned out! Thanks a lot for the tip!View attachment 7468307
Alright now I've gotta ask, whose Satin Nutmeg is it that gets them that close? Even my mile high barrels don't match that close.
Obviously not an exact match but close especially once it cures and gets a lil dirty.Alright now I've gotta ask, whose Satin Nutmeg is it that gets them that close? Even my mile high barrels don't match that close.
I’m shitty that’s not available over here. Ended up having to duracote mineObviously not an exact match but close especially once it cures and gets a lil dirty.
View attachment 7468580
View attachment 7468582
It does say “cut sewn and assembled in the USA”... I just have a lot of hats and the irony is this and a Noveske hat are the only two I’ve bought sight unseeen and they are the only two that both have this issueThat sucks, I do like the hats that are "shallow", they are easier to shoot while wearing for hearing protection and such than a standard baseball cap though. Wished they would have used a USA manufacturer. Sorry you had to take one for the team. They wont sell many now...
Son of a bitch i just used 4 cans of that exact stuff on my goose pit lid. Turns out "AI Pale Brown" is also "Northern Colorado Corn Field Dirt Brown"Obviously not an exact match but close especially once it cures and gets a lil dirty.
Still has to get cerakoted on the barrel....but going to use it for hunting in a week. Yep it's a laser beam.
Yes it's a lefty AIAT. Finally got a lefty AI!
Did the barrel in 6.5Cm and 1-7.5 twist finished at 23".
Later, Frank
Bartlein Barrels
When you made the barrel did you left twist it
Hi,
Bet you Reggie cannot make that cap without AINA written approval.
Sincerely,
Theis
You’re not wrong. I’m going to take this opportunity to brag. When you find the right one; you win at life. We have a lot in common and share all the same likes. She loves guns, shooting, America, Freedom, football, fantasy football and “other stuff”... we like the same music, she’s smart as a whip, smokin hott, and seriously rad. She’s not a bad shot either.@Movistar - well, not sure what a dude name movistar looks like, but your wife is still better looking than you!!
You’re not wrong. I’m going to take this opportunity to brag. When you find the right one; you win at life. We have a lot in common and share all the same likes. She loves guns, shooting, America, Freedom, football, fantasy football and “other stuff”... we like the same music, she’s smart as a whip, smokin hott, and seriously rad. She’s not a bad shot either.
I shouldn’t brag, but life’s pretty good man. When I was debating the ASR kit vs the AXSR she was the one that insisted I get the ASR kit because it was more special and she thought I “deserved it”... what a lady. I am punching well above my class here...
View attachment 7469057
Yes! That is so kind. I’ll send you my new crappy hat and you can send me one of your good original hats. What a dude. Seriously what a gentleman. Thanks BuLLet!Can we make an exchange.?
@Huskydriver always giving just the tipFinally did my satin nutmeg barrel paint job that @Huskydriver recommended. super happy with the way it turned out! Thanks a lot for the tip!View attachment 7468307
Yes! That is so kind. I’ll send you my new crappy hat and you can send me one of your good original hats. What a dude. Seriously what a gentleman. Thanks BuLLet!
You sure she's talking about the hat...?I also have the Reggie Mathews hat and every time I wear it my wife says it is TOO small. At least my logo is centered...like my shots
Exactly, at least have the rifle in the picture with the hat...sweatshirt...wife...whichever.This turned from a rifle pic thread into a hoodie and hat thread in a minute... AI shooters are like cats, you buy em expensive shit and they play with the box.
Didn’t realize AI gear was so hard to get? I posted up on EBay a couple days ago an Accuracy International embroidered polo that I got from Tac Pro Shooting Center with the purchase of an AE back in the day.
View attachment 7469306
screw the hat, I love those pups!!
you from UT too? only utah boy I know that can get first round hits at a mile with 300 Norma is my boy @HuskydriverUT boys shoot 300 Norma so ..... fail
@Huskydriver More stock for your AI department store.
you from UT too? only utah boy I know that can get first round hits at a mile is my boy @Huskydriver