This... this is why I have dedicated AI’s...
This... this is why I have dedicated AI’s...
I just sell something to upgradeI won all of mine in a raffle.
where do I go to look for that ergo grip mod with dark earth panels? Very slick!
Correct, GTAC Engineering Services in the UK.
These pics are the narrow Ergo, nowhere near as nice as the large one.
It’s changed the rifle considerably, I like it.
Battle of the 16” .308’s. LMT vs AI
Those of y’all that reload and have the 16.5” proof carbon barrels in 308 how much of a pain in the ass was it trying to find a load for it? Using 175smk’s, lapua brass, CCI 200’s, and varget. I’m having horrible luck. Did it take a certain amount of rounds for it to break in or speed up?
Took advantage of Euro's promo a couple of weeks ago and jumped into my first AI (AXSA 6.5CM). Waiting for Knight's to release their new QDC brake in 5/8-24 so I can run this thing suppressed.
Good day at the range. Everything is dialed in an consistent to 1000.
Took the ole girl out for a little fun today. These things are so enjoyable to shoot.
You can add a new barrel in 300NM but it requires a different bolt. Same bolt as a 338 Lapua.
I have a 0.585 boltface and access to a 300WM prefit, I want to know if the 300WM barrel can be reamed to 300NM. I understand it’s a long shot given the case differences, but just want to confirm.
Dudes. If you have to hide how much your gear costs from your wives you’re doing it wrong. My wife MADE me get the ASR over the AXSR. Turned out it was cause she wanted a “Louie” but it’s all goood. She does nails and hair and handbags I do barrels and bullets. It’s all good
I just buy what I want. If she doesn’t like it than tough shit.
I’m not a gunsmith but I did stay at a holiday inn express last night. Yes you can do this because the 300NM case is larger than 300WM.
Your going to spend 350 bucks trying to rechamber it when you can buy a proof steel prefit for 550 bucks. Why would one want to risk boogering up a perfectly good Win mag barrel?
I use the 42” Cadex drag bag. Not sure if that’ll be compact enough for you, but it’s a really nice bag.
Because I’m in Aus and prefit barrels are as rare as rocking horse shit.
Here’s the different cases man. I don’t know if 300 nm will work. The shoulder is further back compared to the 300wm
That’s what I was guessing but just wanted to check. Cheers
Took her out to 1k today. Cold bore big plate. Elevation looked good, kestrel matched up perfectly, went to the middle plate, with ease. Hit right edge judging by the violent twisting. Missed first shot on the small plate (10” or so), not enough wind. Held more wind and rung it back to back. No mirage, light breeze, I was the only one on the range until I left. 
Yep I just wear the pants In The familyI just buy what I want. If she doesn’t like it than tough shit.
Well there is your answer
Whats that??
Suppressor is on the way... The only other important thing, the Raccoon hat, was wearing it while taking the photo.
@extendoclip - Your AXMC looks awesome painted mate... Good work.
What caliber/calibers are you running?
6.5cm is what I was shooting out to 1k. I have a 16” proof carbon barrrel in 308 that doesn’t like my ultra 9 it seems.
Sniperwannabee reasons about what's missing or wrong with the pictures, holding my breath for the answer
Whats that??
Suppressor is on the way... The only other important thing, the Raccoon hat, was wearing it while taking the photo.
@extendoclip - Your AXMC looks awesome painted mate... Good work.
Took advantage of Euro's promo a couple of weeks ago and jumped into my first AI (AXSA 6.5CM). Waiting for Knight's to release their new QDC brake in 5/8-24 so I can run this thing suppressed.
Uhm, Why not Thunder Beast?
Whats that??
Suppressor is on the way... The only other important thing, the Raccoon hat, was wearing it while taking the photo.
@extendoclip - Your AXMC looks awesome painted mate... Good work.
Yeah I painted it with Walmart’s finest Rust-Oleum camo. Save money live better!
Bought this recently, upgraded few parts, couldn’t be happier.
Currently shooting LRI 6 GT and Gradous 6 Dasher.
Special thanks to:
Vicdiesel
Samb300
Plf338
Victor Co
Long Rifles Inc
Currently shooting LRI 6 GT and Gradous 6 Dasher.
Special thanks to:
Vicdiesel
Samb300
Plf338
Victor Co
Long Rifles Inc
Last edited:
Whats that??
Suppressor is on the way... The only other important thing, the Raccoon hat, was wearing it while taking the photo.
@extendoclip
Bingo!!!, hahah
I've never had a picture of a gun make me feel this way before....Took advantage of Euro's promo a couple of weeks ago and jumped into my first AI (AXSA 6.5CM). Waiting for Knight's to release their new QDC brake in 5/8-24 so I can run this thing suppressed.
Finally got her done minus the TB can in jail.... now to try to get some range time
AI AT LE green mile high .308 16.5”
TB CB brake /suppressor adapter
TB Bipod
Anarchy Outdoors low cheek piece
ARC Medium 1.10” 34 mm rings
S&B 3-20 Ultra Short
AI AT LE green mile high .308 16.5”
TB CB brake /suppressor adapter
TB Bipod
Anarchy Outdoors low cheek piece
ARC Medium 1.10” 34 mm rings
S&B 3-20 Ultra Short
AX/AT/AXMC Bag rider for Accuracy International rifles AX/AT/AXMC | eBay
AX/AT/AXMC Bag rider. 3D printed in USA with PETG material, 5 outer layers 50% fill, all weather, stainless steel hardware included. Condition is "New". CONUS No International shipping
www.ebay.com
Man, your sitting on a gold mine of Varget!!! lol
An AI accessories' buffet...just tell the wife its all Chinese made and bought at cheaper than dirt. That always throws them off the scent for me....
Yes he is the guy.
Bought a few of his parts and couldn’t be happier. Super cool guy and makes top notch parts.
Guess I need to be more careful with my background, can’t be flashing the V stash in random pics.
Indeed I love his mag release lever makes popping that mag out under time way easier
