Accuracy International Picture Thread

[Krob95]

I get to be part of the club now...kinda View attachment 7503314

Twinning lmao

 

[CageFighter]

DAMN....and I just sold what I needed.

This is from my 2019 AX308, the factory 13” rail.

yep.....mine is 4.25", the repl that shipped is 3".

 

[CageFighter]

I believe the AXMC and the AICS should be the same handguard. Anyone wanna sell theirs & go 16"?

 

[M4guru]

Negative, the AX AICS is it's own handguard pattern.

 

[Krob95]

The AIAX and the AICS are different. The AX SA and AXMC are the same.

 

[Heretoimproveforhunting]

took these to the deer stand tonight - about 100 years between the two, give or take.

 

[Krob95]

Digging that 5-20US man! Damn nice setup on the AI. What’s the classic lever gun??

 

[Heretoimproveforhunting]

Digging that 5-20US man! Damn nice setup on the AI. What’s the classic lever gun??

its a winchester model 55 takedown. the only gun passed doen from my grandfather - believe it may have been his fathers given age of the gun.

 

[SkyScrapin]

took these to the deer stand tonight - about 100 years between the two, give or take.

Which SPUHR part number is that Raptar rail?

I dig it

 

[Surly]

Finally...

 

[BuLLet]

That was a long wait!

Finally...
View attachment 7504490

 

[CageFighter]

Finally...

SWEET stick! love that CF barrel!

 

[Krob95]

Finally...
View attachment 7504490

Nice AW man!!!

 

[jdnoble]

Inspired me to look at a CF for my ASR...i only have one barrel which is what i told my wife!

 

[Georgedubya]

Finally...
View attachment 7504490

Which scope mount is on that sexy beast.

 

[Surly]

That was a long wait!

Yes it sure was Sir. Going to the range tomorrow Only have one box of 300prc. Got damn covid made everyone stupid for ammo. Hopefully lapua releases brass soon so I can get a load worked up.

 

[Surly]

Which scope mount is on that sexy beast.

Went with the tier one long saddle

 

[Huskydriver]

I could own one of those....

Thought you had a couple?

 

[BuLLet]

Yeah, me too.

I could own one of those....

 

[Surly]

Yeah, me too.

I’ve got A LOT of hand jobs to give to be in your league

 

[Surly]

Let me know....

As long as you are ok with callused hands mixed with clp I’m down

 

[BuLLet]

Surly, where did you buy the mount? Looks like something I'd like to check out.

 

[Surly]

Surly, where did you buy the mount? Looks like something I'd like to check out.

Picked it up here:

Buy Quality Rifle Accessories Online | Tier One USA

Discover unbeatable precision when you shop for rifle accessories at Tier One. Browse our range and shop online for fast delivery. Lifetime Warranty.

tier-one-usa.com

 

[BuLLet]

Thanks. What height did you get?

Picked it up here:

Buy Quality Rifle Accessories Online | Tier One USA

Discover unbeatable precision when you shop for rifle accessories at Tier One. Browse our range and shop online for fast delivery. Lifetime Warranty.

tier-one-usa.com

 

[Krob95]

@jwood1284 inspired me

 

[Surly]

I

Thanks. What height did you get?

went with the high which is 1.5”

 

[M8541Reaper]

@jwood1284 inspired me

View attachment 7504796

elite sand?

 

[Shoots 700's]

Got my Area 419 hellfire 30 cal brake in today. It looks so tiny with the brake as opposed to the Ultra 9 on the end View attachment 7489100

This needs to be on my next purchase list. I think I have just about everything except an AI

 

[Krob95]

elite sand?

Yessir

 

[Krob95]

This needs to be on my next purchase list. I think I have just about everything except an AI

Do it, you’ll be glad you did!

 

[Carnifex]

Ok but how did he get the sling swivel attachment? I would definitely prefer that location vs the factory spot under the cheek piece.

 

[Krob95]

How does 2.625 sound for height over bore with an AXSA with a ZCO in a Spuhr QDP-6002 mount and the 20moa AI rail? Sound pretty close?

 

[R.Walters]

Ok but how did he get the sling swivel attachment? I would definitely prefer that location vs the factory spot under the cheek piece. View attachment 7505024

It was a quick job for @matt2143 on the mill

 

[M8541Reaper]

Yessir

Looks sexy as fuck on that garage floor sir.

 

[SaepeExertus]

Maybe excessive for whitetail, but effective

 

[Krob95]

Looks sexy as fuck on that garage floor sir.

thanks man!

 

[deersniper]

@jwood1284 inspired me

View attachment 7504796

That orange kestrel gonna get you smoked in the coming festivities

 

[Krob95]

lmao well shit. It’s been real guys

 

[deersniper]

How does 2.625 sound for height over bore with an AXSA with a ZCO in a Spuhr QDP-6002 mount and the 20moa AI rail? Sound pretty close?

I’m at 2.9” with a 1.5 Spuhr on a axsa. That’s hand measuring

 

[tyfoon]

Just got my long action AXMC with 1 factory barrel (308) and two custom ones.

Question in the factory 308 barrel; If i mount the barrel and screw it in by hand (hand tight) the timing of the flats (at the front) is not as nice like on the pictures I see where the flats always seem to be at a nice 90degree. If I want that I need to unscrew the barrel for about 1/4 of a turn.

Is this expected behavior?

 

[Krob95]

my factory 6.5cm barrel doesn’t line up square to anything. Not really a big deal IMO. I don’t think my proof barrel does either.

 

[Huskydriver]

Just got my long action AXMC with 1 factory barrel (308) and two custom ones.

Question in the factory 308 barrel; If i mount the barrel and screw it in by hand (hand tight) the timing of the flats (at the front) is not as nice like on the pictures I see where the flats always seem to be at a nice 90degree. If I want that I need to unscrew the barrel for about 1/4 of a turn.

Is this expected behavior?

They are not supposed to line up with anything
and if you don't screw that barrel on all the way and shoot a round off, your face will be in for nice surprise when the case head seperates

 

[M4guru]

Yeah just do what they tell you to do. Doesn't matter where the flats line up, it matters that the headspace is right.

http://www.accuracyinternational.us/wordpress1/wp-content/uploads/2015/01/AI-15591-01A-USER-MANUAL-AXMC.pdf

 

[tyfoon]

They are not supposed to line up with anything
and if you don't screw that barrel on all the way and shoot a round off, your face will be in for nice surprise when the case head seperates

Clear!

 

[Krob95]

Finally got her outside for the first time to shoot something that wasn’t paper at 100yds. Figured fireforming the last 30 pieces of brass would be more fun ringing steel. Ran it out from 400 to 900yds on the small plates with no issue. Got my new to me kestrel trued up as well for my 6.5cm load.

 

[The Durk]

Worked on some practice for next weekends club shoot. Just got my AAC cyclone cerakoted in burnt bronze, and I’m really happy with the results.

 

[tyfoon]

Any recommendations for a compact bag to fit the axmc folded? My short 5.11 bag fitted my tikka t3x tac perfect (folded) but my axmc is few inches longer.

 

[96C]

@jwood1284 as long as our wives never know how much we have all spent... Right?! Haha

 

[Simia Dei]

@jwood1284 as long as our wives never know how much we have all spent... Right?! Haha View attachment 7506430

Mate... I’m not jealous at all

 

[Tack425]

Mine doesn't know I just bought a AXMC to be big brother to the AIAX. Was trying to hold out for the AXSR in lefty but this was too good to pass up....So I know the feeling