Maggie’s What's Your View II
- Thread starter 1J04
- Start date
I was thinking Toyota. Camry
solely on the elongation of the c post from roof to trunk.
either way.
i know the fix.
Contact @TheHorta about NV.
Its a long shot, but @2ndamendfan, any ideas?
solely on the elongation of the c post from roof to trunk.
either way.
i know the fix.
Contact @TheHorta about NV.
Its a long shot, but @2ndamendfan, any ideas?
Contact thies, he knows where the bitch lives.
It's a 2002-2006 model year Toyota Camry
It also might have different front and rear driver side wheels. The rear wheel is black on the inside with a chrome lip. Factory size and cheap, but aftermarket. The front wheel looks like a standard black wheel, like you would see under hubcaps, but I'm not totally sure.
I hear you bro, and I thought the same thing, but look at the angle of the windows, especially the back window. The angle matches up with the model year I stated. Hard to be 100% certain though. I hate thieves and I hope this person is caught!
EDIT: I think you're right, 2011
EDIT: I think you're right, 2011
I need your help guys, can anyone tell me what make, model or year this car is? She has been robbing our mailboxes and this is the best I have so far. Thanks
Ford fusion, above the drivers door handle is a shadow. It looks to me like a keyless entry pad. That is a feature ONLY available on Ford vehicles.
Will try an post a imagine of a 2010, the profile isn't quite right, so maybe look at a 2012 or newer. I will keep looking.
I cant see it.
there was a reason I asked you though.
Probably better on my HD screen on my work computer. Those suckers are amazing!
This phone is smaller than my, well, its small....
i know smart people. (Looks at self in mirror with doubt....)
there was a reason I asked you though.
Probably better on my HD screen on my work computer. Those suckers are amazing!
This phone is smaller than my, well, its small....
i know smart people. (Looks at self in mirror with doubt....)
Ai image searchers like 11 camry. the fusion has a squared off back seat window, the image and vid clearly shows the back window comes to a point.
I think the crap quality and shadows playin with ya.
I think the crap quality and shadows playin with ya.
Yea I agree, shadows playing with me on my phone. They keypad I think I see is actually the top opening to the door handle. The handle is like a hoop you reach through the top and pull vs old school you reach under and pull.
Off the car detectives for a moment.
At work and get an ocular migraine while I'm trying to read one of these stupid test indicators. Had to go from the 0 to the 3 (movement of 0.003" or 3 thousandths).
Hate this style. Dial face is 1.5". Each tick mark measures 0.00005" (50 millionths).
Much prefer this style. Same size dial but tick marks measure 0.0001" (1 ten thousandth or tenth).
Back to the car detectives. Hope you figure it out and get things resolved.
At work and get an ocular migraine while I'm trying to read one of these stupid test indicators. Had to go from the 0 to the 3 (movement of 0.003" or 3 thousandths).
Hate this style. Dial face is 1.5". Each tick mark measures 0.00005" (50 millionths).
Much prefer this style. Same size dial but tick marks measure 0.0001" (1 ten thousandth or tenth).
Back to the car detectives. Hope you figure it out and get things resolved.
Holy shit what are you measuring? Blonde pussy hairs?
I run a cnc grinder making parts for turbo fan jet engines. Sometimes I grind straight and some times I grind shapes closer to molding profiles. I also ground threads. From Tomahawk or agm-86 alcm cruise engines to light business jet engines. Our biggest engines are in this plane. Each of those engines a has at least 4 parts that I or my coworker machined on at least 2 operations.
Tonight I'm running parts for a military engine and had to adjust for taper. Some of my parts are designed to spin at 30k for commercial or 80k for military. Tightest tolerance I run on my machine is +/- 0.0001" with 0.0004" runout.
Good leads above. Perhaps a game cam or similar device mounted to the hitch of a vehicle parked 50-100 ft forward of your mailbox. Might get a plate shot.
Thanks everyone, your help is much appreciated this has been going on for months and it's very frustrating. We even have local police regularly using our driveway for surveillance to no avail. He / She has been incredibly lucky so far, but that will change.
IR cameras don't work because the lights of the vehicle burn out the picture making it impossible to get a plate picture.
What we need is a LPR license plate reading camera but it's about $800 to setup and so far I haven't lost any money.
IR cameras don't work because the lights of the vehicle burn out the picture making it impossible to get a plate picture.
What we need is a LPR license plate reading camera but it's about $800 to setup and so far I haven't lost any money.
- Nov 3, 2010
- 10,923
- 24,404
Pulled the poser mobile into the shop to install a leveling kit on front, and realized I need a taller jack. Think it is time to source a two post lift to make life easier.
Box up an old iPhone with the find my phone feature turned on.
Quick, easy and you get a trace and destination.
Should match the whereabouts of the phone the thief carries.
It has been a above average balmy winter so far but someday it will end...
Pulled the wool leggings out of storage for a quick dryer tumble and iron. Right is pure wool German surplus, left wool blend Columbia. The wool shirts are ready to go. 3 layer system, poly then wool then brown duck bibs, temp specific footwear (I have a lot of boots). After one gets all that warmth pulled on you have about 5 minutes to get outside before you start roasting.
On a current events note, it helps to have a daughter who works in a mall adjacent to a large sporting goods store.
$39.95 w/o taxes.
Going under the knife for the left side knee replacement 2/1/21. By May l'll be ready to start the world on fire. Or push a 21" mower. Either will be an improvement.
Pulled the wool leggings out of storage for a quick dryer tumble and iron. Right is pure wool German surplus, left wool blend Columbia. The wool shirts are ready to go. 3 layer system, poly then wool then brown duck bibs, temp specific footwear (I have a lot of boots). After one gets all that warmth pulled on you have about 5 minutes to get outside before you start roasting.
On a current events note, it helps to have a daughter who works in a mall adjacent to a large sporting goods store.
$39.95 w/o taxes.
Going under the knife for the left side knee replacement 2/1/21. By May l'll be ready to start the world on fire. Or push a 21" mower. Either will be an improvement.
- Nov 3, 2010
- 10,923
- 24,404
How do you like the atlas? Eyeing either an atlas or triumph, but steering more toward and atlas 9KBP due to a lower overall height.
- Nov 3, 2010
- 10,923
- 24,404
Just turned 1500 miles in the month I’ve owned it, relax nancy
We've been driving over the mountain every weekday, for the last two weeks, and the lack of snowpack is concerning. I only have one more week of radiation after today, so the good driving weather has been nice, but after that: let it snow, let it snow, let it snow!
So far so good but have only lifted a couple of vehicles. Had it for 10+yrs but could never find spot in old shop where both posts would be on thick enough concrete. Bought new place last year w/ nicer shop and finally got installed. Went w/ Atlas primarily so I could pick up at Greg Smith in Atlanta and not have to deal w/ hassle of shipping. Install was easy and only change was to add longer anchor bolts. Nothing so far that would make me say don't get an Atlas.
Dude.
Do you feel the need yo correct everyone when you clearly don't got the whole picture?
Do the Hide a favor. Log out. Go to longrangehunter and stay there.
Or learn to STFU.
Do you feel the need yo correct everyone when you clearly don't got the whole picture?
Do the Hide a favor. Log out. Go to longrangehunter and stay there.
Or learn to STFU.
You are a bored and washed up guy with nothing better to do than criticize.
nice retort by the way.
Very original on both accounts.
nice retort by the way.
Very original on both accounts.
1 was cvg
2nd was SLC there doing alot of construction. That the view from the Sky club
3rd of the Day was ONT
Might want to back down just a touch, considering you’re fairly new here. Glad to have you if you treat folks with respect, however, you’ve been digging on @roostercogburn98 a fair amount for no reason. He did his pull and I respect him for that. Give it a try.
- Nov 3, 2010
- 10,923
- 24,404
- Nov 3, 2010
- 10,923
- 24,404
Guys like him aren’t happy unless everyone around him are miserable as well. Sadly,I think it helps them feel more included.
On a side note, his digging hasn’t even started a Ranger grave yet so he’s got plenty of work to go.
The ignore button is a thing of beauty, just saying for a friend 
Similar threads
