Accuracy International Picture Thread

[BuLLet]

Zero and a EraTac, nice combo... good luck with it!

Here’s my first AI. Picked it up over in the PX section last week and received it today.. just got it all set up. Excited to get it to the range. View attachment 7600500View attachment 7600501

 

[hafejd30]

Poor mans AI.....is that like a Rich mans Savage

Well it’s not new or cool, but finally got my poor mans AI put together

 

[CageFighter]

Here’s my first AI. Picked it up over in the PX section last week and received it today.. just got it all set up. Excited to get it to the range. View attachment 7600500

whats the barrel length? 16 or 18"?

 

[HenryTheAce]

whats the barrel length? 16 or 18"?

Proof 16” 1:10tw

 

[Leatherlunger]

Poor mans AI.....is that like a Rich mans Savage

Only other thing I want for it someday is a bartlein prefit. Feels good to finally have my AI. Too bad that fuckin ATX came out just in time to piss me off. Someday I’ll have one of those too!

 

[Tex68w]

I might have an unfired factory Bartlein 16.5" .308 barrel for sale soon for those interested in such things.

 

[Luvman]

I might have an unfired factory Bartlein 16.5" .308 barrel for sale soon for those interested in such things.

My AT LE is a kitchen table conversion. Would be nice to have the matching 16.5” barrel to go with it. I need another .308 barrel like I need a hole in my head.

 

[Huskydriver]

Here’s my first AI. Picked it up over in the PX section last week and received it today.. just got it all set up. Excited to get it to the range. View attachment 7600500View attachment 7600501

The furs really tie the room together

 

[mercracing]

Bartlein is done with my stubby 308 barrel for my AXMC. Picking it up Saturday

 

[Dave62677]

...

 

[bb505]

From bag to bang...

A real testament to the system. 16.5" Proof CF, federal GMM 168g.
Yes I know 2 shots don't make a group, but it's still consistent.

 

[Huskydriver]

From bag to bang...View attachment 7600780
A real testament to the system. 16.5" Proof CF, federal GMM 168g.
Yes I know 2 shots don't make a group, but it's still consistent.

But you missed the dot?

 

[Krob95]

From bag to bang...View attachment 7600780
A real testament to the system. 16.5" Proof CF, federal GMM 168g.
Yes I know 2 shots don't make a group, but it's still consistent.

I’m glad that stupid barrel is working for ya man!

 

[bb505]

But you missed the dot?

Wind

 

[blbennett1288]

 

[Longshot85]

View attachment 7601251

That a tempest on top?

 

[blbennett1288]

That a tempest on top?

Both are Vudoo actions. V22 on bottom and V360 on top

 

[Longshot85]

Both are Vudoo actions. V22 on bottom and V360 on top

I'm an idiot, was outside in glaring sun and wasn't paying attention lol

 

[Defender3]

View attachment 7601251

Paying homage to a classic Twilight Zone episode, suddenly I find myself "obsolete" with my V22 90 in a legacy AICS (/satire off ). S&B PMII mounted in a 1.5" Spuhr to alleviate any bolt lift concerns.

 

[brianf]

You should be ashamed and not even go in public with that pile of tin-foil

 

[bb505]

2 AIATs in Accuracy Obsession Chassis, in side by side stages for the opener of the Wisconsin prs matches. One guy designed it, and one guy won the whole match shooting 96%, out of a field of 115 or so shooters. Unfortunately for me, I was neither ... and I'm in the foregound of this picture . W/ @samb300

 

[The Durk]

Got my first confirmed 66% IPSC hits at 1250 yards with my stubby 20” 308 barrel.

 

[Noob Sammich]

175gr SMK's?

 

[Tex68w]

175gr SMK's?

Same question?

 

[Tex68w]

A few of the AI's at the CR2/Frank class this weekend.

 

[samb300]

Shot my first WI PRSC club match of the season on Saturday, had the newly painted production chassis from Custom Gun Coatings and took home the win against a tough field of 100+ shooters. Love this camo!

 

[Frank Green]

Bartlein is done with my stubby 308 barrel for my AXMC. Picking it up Saturday

View attachment 7600739

let me know how it shoots brother!

Later, Frank

 

[blbennett1288]

Shot my first WI PRSC club match of the season on Saturday, had the newly painted production chassis from Custom Gun Coatings and took home the win against a tough field of 100+ shooters. Love this camo!

View attachment 7602826
View attachment 7602827

Nice shooting @samb300 !

That rifle is gorgeous!

 

[Longshot85]

Shot my first WI PRSC club match of the season on Saturday, had the newly painted production chassis from Custom Gun Coatings and took home the win against a tough field of 100+ shooters. Love this camo!

View attachment 7602826
View attachment 7602827congrats

 

[Longshot85]

let me know how it shoots brother!

Later, Frank

Not even my setup, but THANKS Frank for all you do for the community !

 

[FB67]

I found some time over the past few weeks to get the new to me AI dialed in and went and shot some steel out to 1080 Y lots of fun really liking the AI.

 

[The Durk]

Same question?

I'm using 175 Berger OTM Tac's.

 

[turboek]

GTAC conversion finally made it. Threw that and the 16" PR barrel back on for some plinking

 

[HillBilly n TX]

Shot my first WI PRSC club match of the season on Saturday, had the newly painted production chassis from Custom Gun Coatings and took home the win against a tough field of 100+ shooters. Love this camo!

View attachment 7602826
View attachment 7602827

Is that a new bag rider we may see in the future. Looks good.

 

[samb300]

Is that a new bag rider we may see in the future. Looks good.

Ha, I'm surprised no one had said anything yet! It's a 3D printed prototype for now, but I'm unsure exactly how I will proceed. I really like how it attaches through the buttplate and moves with the LOP adjustment, but I'm unsure if it will work with the atx/asr buttstock. I don't necessarily like having to go to a picatinny attachment but I know that will work on everything.

That being said, even the 3D printed version worked awesome at the match.

 

[brianf]

instead of me scrolling through 100 pages.. can someone post a pic of a AXSA/308 with a 16" barrel no supressor

want to see how fir it sticks out of the forend

thanks

 

[Movistar]

I had a moment of brain fog and almost sold my ASR. So dumb. Can’t sell it. Just can’t do it. It’s too good. Worth every penny.

 

[blbennett1288]

I had a moment of brain fog and almost sold my ASR. So dumb. Can’t sell it. Just can’t do it. It’s too good. Worth every penny.

Need more pictures...

 

[Movistar]

An adequate punishment for a near mission failure...

 

[HenryTheAce]

instead of me scrolling through 100 pages.. can someone post a pic of a AXSA/308 with a 16" barrel no supressor

want to see how fir it sticks out of the forend

thanks

16” proof 308 barrel w/ a TBAC CB

edit: 16.5”

 

[Movistar]

If I’m not mistake the Proof barrels all come finished as 16.5 correct?

 

[HenryTheAce]

If I’m not mistake the Proof barrels all come finished as 16.5 correct?

I believe you are correct, yes.

 

[FB67]

Looks like Table Mesa Road area off the I-17, or maybe off the Beeline Hwy?

This is at Cowtown shooting range

 

[MTxTwelve]

Swapped from the 4-16x42 F1 to the 7-35x56 F1 and got it zeroed. Here's a string of three after I reset the zero stop.



ETA: Not sure what's going on with the frame rate in the video at 00:12 (YouTube related).

 

[wichitaguns]

If .223 is ever available to average Joes like me for AXMC or AXSR......I would definitely expedite purchasing one finally.

Are these only for AI SA?

Any word or info on a .223 bolt for AXMC or AXSR?

This was never a AI official offering was it?

 

[96C]

Looking for Fallow deer.

 

[khymiller2]

View attachment 7606067Looking for Fallow deer.

Where is it?

 

[CageFighter]

any1 running a post14 AICS chassis, w a Vortex Razor 4.5-27x? If so, what scope height rings are you using? Im looking for a Spuhr mount but undecided btwn 1.5" (#4002) or 1.35" (#4006). Im temporarily using a G-mount thats 1.5" height and the gap btwn the bottom of the scope and the top of the rail is more than .25" Can i use the shorter mount (#4006)? or stick to 1.5"? or any other recc on mounts/rings?

 

[craigos]

anyone here replace their curved trigger shoe with a flat? I got my flat trigger shoe for my ASR but buggered if i can get it on.

 

[VargmatII]

any1 running a post14 AICS chassis, w a Vortex Razor 4.5-27x? If so, what scope height rings are you using? Im looking for a Spuhr mount but undecided btwn 1.5" (#4002) or 1.35" (#4006). Im temporarily using a G-mount thats 1.5" height and the gap btwn the bottom of the scope and the top of the rail is more than .25" Can i use the shorter mount (#4006)? or stick to 1.5"? or any other recc on mounts/rings?

I did use a similar set up and used the Vortex PMR 1.1" rings for a season. You could probably get away with a Spuhr 4001 but it depends on your barrelprofile and the scopecaps, it might be a tight fit. The 1.5" is way too much, unless its needed to line up with nightvision clip on or similar.