Gotta love the high Rockies this time of year... rifles aight
I agree, but I think the ATX barreled receiver also sits lower in the chassis as well, and may be one of the problem in just removing that section forward of the mag well on the AX (I mean if you could mill it off for example).Somewhat of a thread drift but your tripod placement has spurred a thought regarding the AX/ASR chassis.
Does anyone know what the purpose of the lump in from of the mag well is for on the AX series of rifles?
It made sense as a hand hold on the original AX rifle but seems to be an odd 'feature' to still have, unless there is an purpose for it I'm not seeing.
Seems to me like the ATX would be far nicer to shoot of a tripod than the AX/AXSR due to the considerably lower centre of gravity.
It's where you place your support hand when you hip fire the rifle.Somewhat of a thread drift but your tripod placement has spurred a thought regarding the AX/ASR chassis.
Does anyone know what the purpose of the lump in from of the mag well is for on the AX series of rifles?
It made sense as a hand hold on the original AX rifle but seems to be an odd 'feature' to still have, unless there is an purpose for it I'm not seeing.
Seems to me like the ATX would be far nicer to shoot of a tripod than the AX/AXSR due to the considerably lower centre of gravity.
Cheers, that makes sense.The ax has the bump as that's how the enclosed forend mounts, it's wedged into it with 2 screws from the bottom.
I like vertical grips better - even on my AR's, I just find I get a better hand position and control the trigger better with a fatter vertical grip instead of a slanted AR15 style grip (like the Ergo on the ATX). I didn't spend any time trying shooting the Ergo, since all my other chassis have vertical grip though...
I'm jelly.....from mile high or Euro?Almost NRL Hunter Heavy legal...View attachment 7715630
Awesome!!!! Carbon barrel and your there!! That is my plan for hunter if I ever get mine.Almost NRL Hunter Heavy legal...View attachment 7715630
Thanks, I think I'm 10 at EO.I'd think from MH. I believe I was #8 at EO and don't have anything yet.
Courtesy of our own Sam B !anyone know of a keyslot flush cups that don't include extra rail so I can attach a flush cup sling to the handguard?
Yes this. A 12 would be nice. I wouldn’t totally hate also have a 15 or 20Is there any plans to make 12 round magazines? Since the AX 10 round mags are welded and can’t accept an extension.
I hear they're right after the .223.Yes this. A 12 would be nice. I wouldn’t totally hate also have a 15 or 20
Mile HighI'm jelly.....from mile high or Euro?
I have a Proof Carbon barrel...but in 6CM. I'll weight it and see where she stands...may have to change an outstanding order to a 6.5CM M27.Awesome!!!! Carbon barrel and your there!! That is my plan for hunter if I ever get mine.
I would figure a third party could make them lr modify existing mags ?I hear they're right after the .223.
With a CB Brake and TBAC Ultra 7.With 24" CF 6 Creedmoor barrel and no brake.View attachment 7715676
Yes, you want the post '14 screwsIs this the one that is for Keyslot on the ATX?
(Countersink Style, AI #25445)
With a CB Brake and TBAC Ultra 7.View attachment 7715681
The Proof is a 6 Creedmoor that's slated for antelope hunting. Wouldn't qualify for NRL Hunter.Going to be miragy... I decided Hawkhill marksman contour in all steel to make weight...
I decided on 24" and it is actually Heavy Palma, but not 100% sure on the weight, haven't received it yet . Its hard to figure out everything in advance in terms of the weight... I double checked after I postedThe Proof is a 6 Creedmoor that's slated for antelope hunting. Wouldn't qualify for NRL Hunter.
What length did you go with for your Marksman and what weight did it come in at??
With a CB Brake and TBAC Ultra 7.View attachment 7715681
ZCO is on AXSR. Leupy is light weight.Went boss on everything then put a lupy on top smh.....
ZCO is on AXSR. Leupy is light weight.
Pretty sure they are just gonna sell ya a hinge to make the current atx stock fold.Has there been any word when the AXSR rear stock will be released for the AT-X? Hopefully they will selling the AT-X with the AXSR stock as a complete package, really don’t need the non folder piece laying around.
Until the ZCO 2-16 comes out right ? RightZCO is on AXSR. Leupy is light weight.
any real world pics of elite sand out yet?Yep, mine arrived 2 weeks ago.
Probably just another one of those drunk assholesNvm, definitely read that wrong mines FDE
Probably just another one of those drunk assholes
Thanks, good info.Like it so far! Still need to dig out my muzzle brake and throw it on.
Couple observations.
1) I’ll be putting the MDT vertical grip on. Don’t love this one.
2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like.
3) Magazine well is awesome! Super fast.
4) Sawtooth weights were great fit and finish.
5) It just looks plain evil.
Like it so far! Still need to dig out my muzzle brake and throw it on.
Couple observations.
1) I’ll be putting the MDT vertical grip on. Don’t love this one.
2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like.
3) Magazine well is awesome! Super fast.
4) Sawtooth weights were great fit and finish.
5) It just looks plain evil.
What height Spuhr is that mate? I’m probably going to put same scope on mine if ever comes ( colour black & in Australia) Do you plan on putting forend rail on top? Not sure if 1.35” or 1.5” be needed? CheersLike it so far! Still need to dig out my muzzle brake and throw it on.
Couple observations.
1) I’ll be putting the MDT vertical grip on. Don’t love this one.
2) I’ll need to get higher scope rings. With the cheek rest bottomed out my eye is higher than I’d like.
3) Magazine well is awesome! Super fast.
4) Sawtooth weights were great fit and finish.
5) It just looks plain evil.