D
Dolomite
Private
Latest activity Postings Featured content About Feedback Stats
-
-
DDolomite replied to the thread Terminus Actions.Yup, ok here goes. I insert the firing pin into a block of wood or a hole in a wooden table. Depress the firing pin by pushing the bolt...
-
DDolomite replied to the thread Are Whidden Dies Worth It?.Whidden dies do not over size the brass vs rcbs or Redding which sizes the cases almost back to factory. Whidden does size the base a...
-
DMake sure you have a smaller .062 firing pin vs a larger .080, or at least a tight fitting pin the hole fitment. Helps the thinner small...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with
Like.
I clean the barrel first to get all the loose fouling out and to get rid of most of the copper fouling if any. If I'm in a hurry I use... -
DDolomite reacted to FredHammer's post in the thread How and when to utilize abrasive bore cleaners with Like.
Wipeout or Shooters Choice foam for 2-3 hour sits. I’ve not found the accelerator to do much more when combined with Wipeout foam. I...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Haha.
Go for it!
-
DDoesn't matter if we import the steel or not.... even raw material to make the steel gets imported to some extent depending on what it...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
Not the first time guys have done it to a brand new high end barrel. I've told guys this. If you have a lower quality or a factory type...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
Going to the extreme opposite end of the spectrum on this right now..... Not abrasive damage but one of the guys here that helps me in...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
OK so it wasn't with an abrasive cleaner and a brush.... Turned out they where putting an abrasive or using bullets impregnated with an...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
Yeah the RPM! Busted a guy at a bench match claiming we had bad steel and that the throat was pushing metal! Then blamed the gunsmith...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
I have to try and get a hold of the guy on the phone. I ran out of time yesterday and had to leave early. His letter didn't say anything...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
Unless your a chemist….don’t go making your own bore cleaner and or mixing cleaners together. You have no idea on how the chemicals are...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
Still pretty accurate. I’ve never used patchout…so cannot comment on that. I know of plenty of places/people that use Boretech...
-
DDolomite reacted to Frank Green's post in the thread How and when to utilize abrasive bore cleaners with Like.
Correct…..taking away from the lands….the lands do the driving of the bullet. We made test barrels a few years back for Socom in...
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
