Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I've got a chambering issue cause it's also scratching the bullet. But I did take the expander mandrel out of the die and sitted a couple and they didn't move when chambered. I'm gonna have the barrel worked on to fix the chambering issue still.
Yes annealing before resizing with annealeez. I even tried a piece without annealing to see the results and it did the same thing. Yes it's touching the shell holder and it cams over. I measure with what I have and it's reading .220
Full length sizing with hornady dies using imperial sizing wax, annealing. I'm using my calipers to measure the inside after sizing. And I'm getting .006 at least.
New to reloading and having the bullet pushed back into the case when you load it. I'm using 77 gr nosler custom competition and loading to mag length with lc brass. I've sized the brass and checked and it should have more then enough neck tension.
If you cant push water or wire down it sounds like you found your problem. Being just a gas tube I'd just buy a new one or call and company that you bought it from and see what they will do for you.
Rosco and sons of liberty gunwerks. I dont have either but everything I hear about both is positive. They focus more on combat style barrels but still get good accuracy.