Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Older US OPTICS 3.2-17X scope. 30MM tube. Parallax is on the front bell. Red Illuminated GAP MIL reticle with MIL turrets Includes Vortex objective cover, USO reticle cover and US Optics bubble level mount and leveled on scope. ITAR - US Shipping only. Sight picture is at 17X, 200 yards. Easily...
The Annie annealer is quite reasonable. http://www.fluxeon.com/Annie.html. Shameless plug. No flames. Very repeatable. Sent from my iPhone using Tapatalk
Which magnification Tango 4 scope did you have? With these kind of prices, i tend to go with experience, a friend had an XTR and let me try it - it had a nice eyebox for me. Some one should provide a rental service for these things....like trying on a suit first.
Looks like the bottom metal was inletted too deep. That is why the mag doesn't lock in - the bolt or receiver is limiting how far upwards you can push. Does the mag freely latch with just the bottom metal? Try putting a washer between pillar and bottom metal to get the right height. This...
Make sure you get beveled/tapered heads in them so it can accommodate tilt in the bottom metal. I'd go the brownells route. Sent from my iPhone using Tapatalk
It's supposed to be a class 3a/b fit for the barrel. If you want to go Remage style get a stiller or defiance action that is true to begin with. Sent from my iPhone using Tapatalk
Devcon with steel tends to rust. +1 on marine Tex. The acraglass is a bit on the soft side. Check out Ernie the gunsmith - he sells a kit that you can do yourself. To me the DIY is the fun part. And the most utilitarian rifle is often not the best looking rifle Sent from my iPhone...
The problem is the MTU profile. That's a truck axle. I find the Remington varmint and med to light Palma contours the best balance between weight and stability. Sent from my iPhone using Tapatalk
Butlers were great back in the day. But now you have more choices. I like the vortex ones since they are a little more elastic and grippier. I've had the butlers fall off due to recoil and had to use tactical tape to keep it there. Sanding is okay but go slow. The inside is already quite...
I cut the cheek piece out with a wood handsaw. Go slow. I also used two aluminum angle plate as vice jaws - this way the jaws set the line as i cut across horizontally. I messed up a bit and had a "thicker kerf" as Terry said. I lost about 0.15" of material but it doesn't matter - I was...
STR = Scandinavian Target Rifle...i'd try to call Roedale or any of the Scandinavian suppliers? SIG needs to support this rifle, or else their reputation is going down the toilet. The build quality is awesome on this rifle.