Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Yeah! I did what you recommend Jimmy Jr. I have now have 120 MOA from bottom to top. Thank you for the help. Will head out tomorrow and try again to 0 my scope. Regards. Mark
Jimmy, That's a good question. I'm not sure what the "wing" is. And unaware of the zero stop lug. All I know is to remove the turret cap to loosen the 4 screws to set the 0 stop. I assumed that if those 4 screws were loosen and I turned them to the lowest adjustment, that was the end of it...
NF Tungsten 1.125" Murphy Precision Rail / 45 MOA cant. Both of these have been on this rifle since being fabricated in 2013'. It shot lights out at 1M - 2200 yds.
Hello guys, Merry Christmas/Happy holidays. So here's my situation. I just had my .338 LM rebarrelled. I have a Nightforce ATACR 5x25x56 (which I had sent in to NF 3.20 to be checked out while my rifle was away. It checked out fine). After remounting the scope I headed out today to check my...
Hi guys, Merry Christmas to you all. Been a while since I had to break in a new barrel so I thought I'd check in to see what you guys recommend. .338 Lapua Magnum. Bartlein .935" twist, 30" finished, 5R rifling. Berger .300gr OTM pills. 91.5gr. Retumbo. Thanks. Mark
Hello Jarrod. Just seeing this now. Back in 2015 I was searching for someone to build me a .375 Cheytac. I came across David Viers. He had a .375 I believed he called a "Snipetac" or something to that effect. Anyway, I wound up buying a set of his. 375 Cheytac die sets. I waited and waited and...
Before I start seating new bullets I've never used, I always start with the recommended information for whatever bullet and or powder I'm using. Once I'm familiar with new components and how they perform, I can then decide if seating the bullet closer to the lands is desirable or not.
.338 LM, 265gr. Badlands bullet, Lapua brass, 215 Magnum primers, Retumbo or H1000. My rifle doesn't do well seating into the lands so I'm looking for the recommended seating depth. Thanks anyway.
Hi guys, I just received a box of Badlands Precision .338 LM 265gr. ICBH-2 bullets. Having never loaded with these before, I'm searching for some info. I have a few powder loads to work from, the length and BC. But I don't have information for the seating depth. If anyone cares to share their...