Search results

Nice lever!

Thank you for the confirmation. Looks like Jet has them for $47 free shipping and 15% off that price on your first order making it less than $40.

Just took possession of a Schmidt Bender PMII 5X25 with the index knob that is bumpy. MGM has model 1650SV that generally has the correct dimensions. Anyone have experience with this specific switchview or a recommended switchview for this S&B? Thanks in advance!

Thanks for all the input. I have gone with the Kick-eez dual action 15/16 thick recoil pad. The decision came down to two important considerations, can the pad fit/be ground to fit the chassis, and can I put an additional hole through the recoil pad to access the butt plate adjustment screw...

Yet another contender.... tks!

Thanks for the input so far. I'll be at the range trying weight and brake, then decide how much pad I need. Again, thanks!

If it were only that simple....

How about the Pachmayr 990 (Pachmayr&reg Pachmayr your primary source for quality handgun grips and recoil pads)? Similar to the 550. gewehr- Which kick eez have you used?

Just wrapped up a newly built 338 LM and do not care for the recoil pad that came with my chassis. (Almost no padding.) I'm at a complete loss after looking at some of the choices on the market. Have heard the pad can be too soft or too hard, can mess with accuracy, can cause vibrations,etc...

Info so far is just what I was looking for... To an earlier question, the 20 seconds was just to demonstrate my range of control so far. As for the machine posted by ARNIE19, that is what I have started working on. Use straight sided cake pans instead, really simple and the circular run-out is...

All, thank you for the inputs. I have design options that I think will work for 2 to 20 seconds, and 1 or 2 torch heads. You have confirmed that I will need the full range to be successful. Once the machine is up and running I'll share cost and design information, including why some of the...

p.s. I have read multiple threads and have become familiar with the process of setting temperatures, etc. If anyone has done 223 it would be interesting to know your cycle times. The machine being built likes slow speeds so larger cartridges should be easy. But as it speeds up the automatic...

ORKAN- Thank you! I get the fact that everything matters, I just need to know a ballpark so I know if I can use automated feed system based on mechanical linkages or if I need solenoids. With one torch I can use mechanical linkages. I will post the results of my project when it is complete.

I am in the final stages of building a brass annealing machine and need timing information to get the rotational speeds set. For a single torch set-up, how much time in the flame do you anneal 223, 30 and 338 cartridges? How about the same for a two torch set-up? Are two torch heads really...

I'm working on an annealer and would like some information if anyone would share. What is the 20lb tank pressure when it is full? With Benzomatic torch heads (self regulating) where are you setting the regulated tank outlet pressure going to the torch heads? How big a difference does this...

I have an order going in tomorrow so I'll get some Lee lock rings with the integral o-ring. (3 for under $4) Just to clarify, for those using the o-ring lock rings, do you let the head float as built? (With the pins as delivered from the factory) As a follow-up I have found some posts that...

So just add an o-ring under the die lock ring. I'll try that. Have you noticed any difference running only one station at a time? Or doesn't it matter?

I am considering my alternatives to producing "more accurate" loaded cartridges. I currently have a Dillon 550 with standard toolheads. I could get a second press, maybe a Forster Co-Ax (for the floating feature), or I could get floating toolheads like the Whidden's. So, I'd like to know are...

For what it is worth I looked at every suppressor website I could find, read reviews and forums, asked for advice, and spoke to manufacture's of suppressors before choosing a suppressor. By the end I was torn between the TBAC 338P-1 and 338BA. So, I called TBAC and talked with Zac about the...

Anyone heard of or purchased from D&C Gun Company, Gladstone, MO? Products and prices seem reasonable. My searches come up empty.... Contact Thanks in advance!