Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
So my RCBS Chargemaster finally pooped out on me. I've had it for several years and have loaded some accurate Ammo using it. It started making all kinds of weird noises, Wild speed fluctuations, and started throwing lots of undercharges. At the end it would not throw the entered charge. So I...
Just curious as to whether anyone knows the load for the Hornady Precision Hunter 30-06? My bolt gun absolutely loves that ammo and I'd love to replicate it. Primer and powder are a mystery to me.
I'm stationed in VA but hunted GA last year without any luck. My buddy has a lease in Sandersville. This year is totally different. We're seeing a lot of deer. I had this guy come out last night and give me a quartering towards shot in between the bushes and trees. He's definitely mature...
I'm using Lapua 30-06 brass and FL sizing it in a bushing die to give me 0.001-0.002 should bump. I'm firing it in a bolt gun. I noticed some abnormal marks on the case and decided to investigate. It was down toward the case head and only on about half of the case. I cut one open and sure...
So I got the Sinclair Chamber Length Gage for my rifles. I followed instructions and measured the chambers for my GAP-10 in 308 and my Rem 700 in 30-06. The GAP-10 measured 2.041 and the Rem 700 measured 2.529. My question is, how much should I subtract from these measurements to get my...
For those of you using this die I have a question. I was sizing some Lapua once fired 30-06 last night and I noticed that the neck is not getting completely sized before the shoulder starts to bump. What I mean is, I can see where the lube ring goes down the neck and it's just shy of the...
I like my CE ProChrono but I've only been able to use it when shooting prone. What tripods will work with this chrono? Any other options for raising it up to bench level?
I was thinking about getting one but I'm not sure it's big enough. Is there enough space to shoot a rifle on a rest with a rear bag? I would probably either fit my Caldwell Rock to the table as a rest or shoot from the bipod.
I'm currently loading up some 30-06 to test out this weekend. I'm using Lapua brass, H4350, 175g SMKs, and Fed 210M primers. I'm currently at 58.5g of powder and it looks like I'm right at the point of compressing the load. Hodgdon data shows 59.0g as max with no "C". I know Lapua is thick and...
I'm going to conduct an OCW test this weekend for my new bolt rifle. I was wondering if there would be any advantage to doing it at say 200 or 300 yards? It seems like you could get a better handle on the longer range accuracy of a load and also allow the bullet some more distance to stabilize...
Hey fellas! I'm gather up some more tools to try out when loading for my 30-06. I just ordered a Redding Type S FL Bushing die and a bunch of bushings to go with it. I got bushings from 0.330 to 0.337 since this will cover the range of brass I have. My loaded rounds measure the following with...
I'm just curious because my 308 brass doesn't do this. See the ring towards the head of the case? Is that normal? These were fired from a bolt gun with a chamber cut with a PTG Serengeti reamer.
I loaded up some 30-06 to work up a load. I used IMR 4350, 168g AMAX, CCI 200 primers, and Win brass. I was getting pretty inconsistent velocities and accuracy. An older gentleman at my shooting range who teaches reloading classes told me I should try magnum primers. He said they should help...
I shot this a couple weeks ago with my GAP-10 chambered in 308. All of my groups were pretty tight but this one was by far the tightest. This is a 5-shot group fired at 100 yards. It measured 0.172 center-to-center. The load was: 168g AMAX, freshly annealed Lapua brass, CCI 200 primers, 44.0g...
So I figured out where my lands are yesterday with my freshly upgraded rifle. I used a dummy round with a 168g H AMAX that had the ojive area colored with a black sharpie. I found out the exact length to have this bullet just kissing the lands and measured it from ojive to base with my digital...
I sent my REM 700 SPS to GA Precision for some upgrade work and got it back last week. I wanted a precision rifle that I'm still able to hunt with, so weight was taken into consideration. Here's what I ended up going with: - Bartlein 26" barrel, #4 contour, 1:11.25 twist - PTG Serengeti 30-06...
I wanna upgrade the trigger in my GAP-10 and it's gonna be a Geissele. I'm torn between the SSA-E and the DMR. I do a lot of precision shooting and occasionally hunt with this rifle. Help me decide.
I'm currently using a Dillon digital scale to weigh my powder charges. I like the size and the ease of use..., and the fact that it matches all my other Dillon stuff.... But it seems to be pretty inconsistent when used with the power adapter plugged in. I haven't used it enough with just...
I'm in the process of building a precision rifle and I need some ideas on a rail/forend. It has a 24" Douglas bbl in a heavy contour. It's 1" behind the gas block and 0.850" at the gas block and forward. It has a rifle length gas system and a low-pro block. What rail/tube would fit this...