spr

In 2023, I intend to build 4 AR-15s, and I would like a little help planning out the parts I'm going to have to buy, as well as the strategy for each gun. Three of the rifles will be in 556, including one that will be a Recce/SPR, and one that will be an SBR, while the fourth will be in 6mm...

Ring Size - 35 MM Height - 38 MM/1.5” 0 MOA Original packaging. Includes Sphur scope leveling tool. Barley used. Mount sold “as is.” $299, CONUS buyers only, Payment via Venmo. Seller will pay shipping and insurance.

I am currently in the process of building a DMR/SPR rifle chambered in 6mm Arc. Current set up pictured below.. I am uncertain of what optic to go with. I am looking at either the ACTAR 4-16x42 Tremor 3 reticle and the Kahles 3-18x50 SKMR3 reticle with a SPUHR/ Badger condition one mount. I...

Cobalt Kinetics BAMF pro series 16 inch in .223 Wylde. It has been a safe queen with only about 30 rounds on it. Has a KE trigger, Nickel boron BCG , cobalt buffer system , next level mid length adjustable gas system, 45 deg safety and CH all fron cobalt kinetics. This a one very nice crafted...

For sale no trades. 18" criterion spr build. Exactly 123 rounds through the barrel. Family is expanding so I have to thin out the safe. 18" Criterion hbar barrel with headspaced BCM bolt. Geissele CH, Mk14 15" rail, G2SE, h3 buffer. Ballistic advantage lower with G parts kit. Voltr MURS upper...

Hey guys, Just wanted to share my MK12 style build after 1,200rds Parts My MK12 is far from “clone correct”. I wanted the performance of the MK12 first, and the looks second. This build was started in the late part of the pandemic (October 2020). Most clone correct parts were out of stock...

So I've decided to sell my LWRC IC SPR. This was a 200pc Limited Edition run that LWRC did in Sniper Gray Cerakote, and came standsrd with a Geissele S3G trigger, an AAC 51T 3 prong flash hider, and a set of LWRC Skirmish sights. I currently have a VLTOR E-Mod stock on the rifle, but can aquire...

Extremely accurate Windham weaponry (formerly Bushmaster) 20” heavy Varmint barrel 1:8 twist, stainless, fluted, .750 gas with rifle length gas system. Includes matched bolt about 1000 rounds on it. Sells for $340 new $250 shipped CONUS Description from website. This superbly accurate VEX...

Update: open to trade for Vortex Razor Gen 2 mil/mil with cash on my end. Or Vortex Razor gen 1 even trade. Precision Reflex Mark 12 Mod 0 SPR (upper only) Douglas Barrel 18 inch 1:7 Ops Inc Muzzle brake and collar Carbon Fiber handguard (super lightweight) Rainer Arms BCG Bravo Co Charging...

Rationale: I've had the itch for a while now to get a SPR type of rifle. I've never fired a Mod 0 or Mod 1 in the military, but always thought they were cool in the hands of the guys who carried them. At first I just wanted to buy one, but with [close to true SPR's] made by reputable...

Hey guys I've been wanting to do an Spr type build for a long time but my funds are a bit limited. I have a Sig 556r that I do love though. Being that I've seen it's pretty accurate with irons, what's your opinion on making it into an spr platform?

I couldn't think of a decent title to describe the question I'm asking, sorry... About a month ago, I discovered an imperfection on the crown of Krieger barrel. I sent it back to them, they evaluated it, and re-crowned it; but when they re-crowned it they didn't push back the shoulder. So...

Gentlemen - Please provide me the benefits of 556 NATO Chambering vs. Wylde Chambering. Please present the information from results and personal experience. Build: Rock River Lower Receiver Rock River Single Stage Trigger with JP 3.5 Trigger Springs. (Hopefully a better trigger in the...

-Nightforce NXS 5.5-22x50 -Badger FTE -Nightforce rings -2 lb trigger -Tactical OD green Duracoated stock -Launching 175 SMK's at 3050 FPS.

can an FN SPR barrel be recontoured to fit an ops inc 3rd model 12 suppressor in .308 without any loss of accuracy? all this requires is the recontouring of the barrel and threading. no muzzlebrake or silly nonsense. I do believe it's a hammerforged barrel with chrome-lining.

I am thinking of buying a FN SPR A1a 20" non-fluted bbl(.308) add CDI bottom metal. <span style="text-decoration: underline">Does anyone have any pics of that rifle?</span>What would be a good price for that gun new w/o bottom metal?

Right now I am looking at the Night Force 2.5-10x24 and 2.5-10x32 both MIL/MIL, or possibly a USO SN-4 1.5-6x28 with EREK. I already have a Night Force 3.5-15x50 on another rifle, and a USO ST-10 on another build and I love both. I would like to keep the weight down by going wth the NF and I...

Hello all, I am casting about for a low mount for the ar scope, that is high quality. I have a larue spr mount, but I need a mount that is lower- will the nightforce unimount fit the bill? I am also looking at changing optics (from eo-tech to scope, back and forth), so it does need to be very...

fn .308 with burris xtr lows holding falcon 5.5-25 50mm. 10 shots during sight in while still tweaking the windage. 95 degrees outside.

I was wondering what works for you guys shooting FN SPR's in .308. I'm mainly curious about the similarities between the loads that work and don't work in these rifles, just to see if there is any consistancy. I would think with modern machining techniques, everyones results should be sort of...